{{ product.name }}
See New Part # {{ product.superseded_product_sku }}
{{ determineProductPrice( product ) }}
{{ determineProductSalePrice( product ) }}
0
No Products
No Results
Showing Parts for —
{{ active_vehicle.name }}
Did you mean {{ response.didYouMean.query }}?
Rotors & Brakes
Maintain proper performance of your braking system with the Champion 4054H DOT 4 Brake Fluid. This premium DOT 4 Brake Fluid is a high-boiling, glycol-based brake fluid for disk, drum, and ABS braking systems. Champion DOT 4 Brake Fluid exceeds the specifications of Federal Motor Vehicle Safety Standard (FMVSS) number 116, and SAE J1704.Features:1 Quart BottleHigh Boiling Point Protects and Conditions Elastomer SealsExcellent Lubricity and Cold-Flow Properties Provides Corrosion and Oxidation Resistance Product Specifications:Dry Boiling Point °F (°C) - 494 (256)Wet Boiling Point °F (°C) - 322 (161)Viscosity @ 100°C, mm2/s - 2.2Viscosity @ -40°C, mm2/s - 1,325pH - 8.4Elastomer Compatibility - PassCorrosion Protection - PassOxidation Resistance - Pass
Maintain proper performance of your braking system with the Champion 4054K DOT 4 Brake Fluid. This premium DOT 4 Brake Fluid is a high-boiling, glycol-based brake fluid for disk, drum, and ABS braking systems. Champion DOT 4 Brake Fluid exceeds the specifications of Federal Motor Vehicle Safety Standard (FMVSS) number 116, and SAE J1704.Features:12-Ounce BottleHigh Boiling Point Protects and Conditions Elastomer SealsExcellent Lubricity and Cold-Flow Properties Provides Corrosion and Oxidation Resistance Product Specifications:Dry Boiling Point °F (°C) - 494 (256)Wet Boiling Point °F (°C) - 322 (161)Viscosity @ 100°C, mm2/s - 2.2Viscosity @ -40°C, mm2/s - 1,325pH - 8.4Elastomer Compatibility - PassCorrosion Protection - PassOxidation Resistance - Pass
The Russell 639500 Speed Bleeder Bag catches all your old brake fluid for a no-spill, no-mess operation. The EPA-approved bag helps collect your old brake fluid and speeds up the brake bleeding process.Features:EPA ApprovedClean Brake Bleeding ProcessHolds 12 Ounces Of Brake Fluid
The Russell 639520 Speed Bleeders - One Person Brake Bleeder Screws makes the difficulty of bleeding brakes a thing of the past! The brake caliper screws come with a double-patented speed bleeder design that replaces the original bleeder valves in your caliper. This unique design opens when still in the caliper and slightly loosened. This allows the old air and fluid to automatically shoot out during the bleeding process. This kit was designed to save you time and allow you to bleed the brakes by yourself. Features: Patented DesignEasy Installation ProcessMakes Bleeding Brakes EasyNote: 1988-2000 GM C/K Pickups fits rear of models with rear drums, 1994-1999 Dodge Ram 2500/3500 Rear.
TheRussell 639560 Speed Bleeders - One Person Brake Bleeder Screws makes bleeding brakes an extremly easy-process due to its revelutionary design. Theses screw comes with a double-patented speed bleeder that replaces the original bleeder valves in your caliper. This unique design opens allowing the old air and fluid out then closes automatically between pumps, making this an easy one man job. Features: Patented DesignEasy Installation ProcessMakes Bleeding Brakes EasyNote: Fits 1999-2004 Ford F-250/350 4WD - Fits Front and Rear, 2000-2005 Ford Excursion 4WD - Fits Front and Rear, 2001-2006 GM Silverado/Sierra HD - Fits Rear only, 2003-2006 Dodge Ram 2500/3500 2WD fits both front and rear.
The Russell 639580 Speed Bleeders - One Person Brake Bleeder Screws makes the difficulty of bleeding brakes a thing of the past! These bleeder screws come with a double-patented speed bleeder that replaces the original bleeder valves in your caliper. This unique design opens when screwed back, allowing the old air and fluid out then closes automatically between pumps. Features: Patented DesignEasy Installation ProcessMakes Bleeding Brakes EasyNote: Fits 2001-2006 GM Silverado/Sierra HD - Fits Front and Rear on 2WD/4WD models with front and rear disc brakes, 1994-1999 Dodge Ram 1500/2500 - Fits Front of 2WD/4WD models, 1988-1996 GM K2500 Front.
The Russell 639590 Speed Bleeders - One Person Brake Bleeder Screws makes the difficulty of bleeding brakes a thing of the past! The brake caliper screws come with a double-patented speed bleeder design that replaces the original bleeder valves in your caliper. This unique design was built to save you time and allow you to bleed the brakes by yourself. Features: Patented DesignEasy Installation ProcessMakes Bleeding Brakes EasyNote: 2005-2006 Ford F-250/350 4WD Front and Rear, 1973-1993 Dodge 3/4 and 1-Ton pickup Front and Rear, 2003-2005 Dodge Ram Front and rear. 1995-1996 Ford F-250 Front, 2005-2008 Ford F-250/350 4WD Front and Rear, 1995-1997 Ford F-350 Front and Rear.
The Russell 654020 Billet Aluminum Brake Line Clamps (12-Pack) are manufactured to secure your 3/16” OD Hard brake lines to the frame of your truck. The clamps are built from stainless steel to last long and resist corrosion from the elements. The clamps come manufactured with proportionate valving and are designed to be bolted almost anywhere, making these extremely versatile for your build or truck.Features:Pack Of 12Universal 3/16” LinesStainless Steel Construction
The Russell 654030 Stainless Steel Brake Line Clamps (12-Pack) are manufactured to secure your 3/16” OD Hard brake lines with some of the best fastening options on the market. The clamps are built from stainless steel to last long and resist corrosion from the elements. Russel designed the clamps to be bolted on virtually anywhere making these extremely versatile for your build. Features:Pack Of 12Universal 3/16” LinesStainless Steel Construction
The Russell 670700 -8 O-Ring Boss Radius To -8 AN Port Adapter Fitting are light weight fittings that were constructed to allow optimum flow. Russel engineered these adapter fittings in a black anodized finish offering you extreme protection and durability. Features:Anodized BlackComes with -8 O-Ring
Secure your brake lines with the stainless steel Russell 683940 Brake Line E-Clip (10-Pack). Russel designed these clips to work with most brake lines.Features:Pack Of 10Universal Fitment Stainless Steel Construction
Secure your brake lines with the stainless Russell 683941 Brake Line Retaining Clip (10-Pack). Russel designed these clips to work with most brake lines on the market.Features:Pack Of 10Universal Fitment Stainless Steel Construction
The Russell 683942 Bolt-On 90-Degree Brake Line Moutning Brackets (2-Pack) are built from steel giving you extreme durability. This 90 degree angle bracket design makes it easy to mount and secure your brake lines in almost every corner and surface under your truck.Features:Pack Of 2Universal Fitment Stainless Steel Construction
The Russell 683943 Weld-On Brake Line Mounting Bracket can help secure many factory or aftermarket brake lines. These tabs are constructed from stainless steel and are built to last against corrosion. This application is a weld on bracket so you can secure your brake lines in almost any position. Features:Must Be WeldedUniversal Fitment Stainless Steel Construction