{{ product.name }}
See New Part # {{ product.superseded_product_sku }}
{{ determineProductPrice( product ) }}
{{ determineProductSalePrice( product ) }}
0
No Products
No Results
Showing Parts for —
{{ active_vehicle.name }}
Did you mean {{ response.didYouMean.query }}?
Fuel Tanks
1
5
1
Maximize fuel delivery to your engine with the BD-Power 1050330 Flow-Max Fuel Tank Sump. Designed for a no-tank drop installation, the BD Flow-Max Fuel Tank Sump installs with a single 3" hole and includes a filter screen. A perfect addition to any aftermarket fuel system like the BD-Power Flow-Max Fuel Pumps, and more! Features: Easy InstallationTank Removal Not RequiredMaximizes Amount Of Usable Fuel In Tank
Pull fuel from the bottom of your fuel tank with the Diesel RX DRX09SMP Fuel Tank Sump. This Fuel Tank Sump eliminates the 1/4 tank issues associated with a draw-straw style fuel pickup. Built in the USA from corrosion resistant materials. Features:Fuel Tank Drop Not Required4.5" Diameter Mounting FlangeCorrosion Resistant ConstructionIncludes Alignment Screws For InstallationKit Includes:1 Anodized Aluminum Sump Bowl2 Anodized Aluminum Sandwich Plates1 Brass 1/2" Male Push to Lock to -8AN Female Fitting1 Zinc Plated Male 3/8" NPT to Male -8AN Fitting10 Stainless Steel 1/4"-20 Socket Head Cap Screws10 Zinc Plated 1/4" Sealing Washers1 Viton Inner O-ring Seal1 Viton Outer O-ring Seal4 Steel Alignment Set Screws (Used for Alignment Only, Then Discarded)1 Packet of Thread Sealer
The Dorman 577-728 Replacement Fuel Filler Neck is a direct replacement for your 1999-2010 Ford 7.3L/6.0L//6.4L Powerstroke. At last, pump fuel with the assurance that youre helping protect the environment while you save money. Designed to prevent fuel leaks during fill ups and to therefore diminish the associated likelihood of air and roadway pollution, it resists moisture build up. Rust, corrosion, and the deterioration they cause are averted. Keep expensive, potentially hazardous fuel where it belongs: in your tank.
Features:
Direct Replacement
Coated For Corrosion Resistance
Fits Only 98.0", 98.6 and 96: Long Bed Models
Replaces Ford OE Part#: 8C3Z-9034K-E, 8C3Z-9034K-F
5
5
1
The FASS STK-5500 Fuel Sump Kit is designed to be capable of functioning independently or in combination with our Fuel Air Separation System, drivers can now get the benefits that come with a sump but without any of the inherited issues.
Like most sumps on the market, the FASS Sump Kit can pull fuel from the outside of the sump through a pre-tapped 1/2" fuel port. However this brings the inherited issues that a line can catch and pull loose. To fix this issue FASS decided that they would also offer a way to pull fuel from the inside of the tank using a Bulkhead fitting and Suction Tube Kit, effectively eliminating this possibility.
Features:
Pulls Fuel From Top Or Bottom Of Tank
Billet Bulkhead Fitting
Eliminates 1/4 Tank Issues
Use the FASS STK-5500B Fuel Tank Sump (With Suction Tube Upgrade) to eliminate the 1/4 tank issues common with most aftermarket fuel systems. Get the added benefits of the fuel tank sump, without the risk of the issue of a damaged line under the truck. The FASS STK-5500B Fuel Tank Sump uses a suction tube that will connect to your existing bulkhead fitting so you can pull fuel from the lowest point in your tank, but feed out of the top so you don't have hoses underneath the truck. Features: Pulls From Bottom Of Tank For Trucks With Existing Bulkhead FittingEliminates 1/4 Tank Issues Associated With Aftermarket PumpsApplication Notes: This kit is for use on trucks that already have a bulkhead fitting. If you do not have an existing bulkhead fitting, consider purchasing STK-5500 Kit (See related items below).
Install the FASS STK-5500BO "No Drop" Fuel Tank Sump (Bowl Only) and eliminate the 1/4 tank issues associated with aftermarket fuel systems. The FASS Fuel Tank Sump includes a 2-piece inner ring that allows you to install this fuel tank sump, without removing the fuel tank from your truck. Each sump bowl is machined for a dual o-ring seal and includes the hardware necessary for installation. Features: No Tank Drop InstallationEliminates 1/4 Tank Issues Provides Fuel From Bottom Of TankGreat Addition for FASS Titanium Series Pumps
The Titan 4020299 Spare Tire Auxiliary Fuel System (STAFS) puts an additional 30 gallons of fuel at your fingertips. In most cases, this can even double the fuel capacity of your truck! This innovative system is designed to repurpose the space commonly used to stow a vehicles spare tire. Its underbody location means that it has no impact on the truck bed's hauling space. In many cases where aftermarket custom wheels and tires are installed on a vehicle, they are not the same size as standard which means the original equipment space cannot be used anyway. The STAFS military-grade cross-linked polyethylene tank body is light at only 30-pounds making it easy for one person to install. This kit includes all mounting hardware, filler kit and electronic fuel transfer monitor and control unit which is operated from the comfort of the cab. The electronic system gives the vehicle operator total flexibility in managing how the extra fuel capacity is used. The fuel can be held in reserve or transferred on-the-go as the need arises. The illuminated user interface indicates the tank's fuel level and features a single-touch button that starts the fuel transfer sequence. With one touch, fuel transfers from the STAFS to tank to the vehicles primary fuel tank and continues to flow until it is automatically stopped by the controller or the button is touched again. The Titan system comes with a universal filler kit featuring an attractive brushed aluminum door that can be installed on the vehicle's exterior sidewall or on an inside wall of the truck bed. All of the mounting brackets, hoses, valves and pump are included with each system. Lifetime warranty on tank body. Features: 30-Gallon Capacity Repurposes Spare Tire Space Transfers Fuel From STAFS To Factory TankNote: Miles to Empty on dash display can be corrected by using custom aftermarket tuning like SCT or EZ-Lynk
The Titan 5310060 60 Gallon In-Bed Fuel Tank w/ 12-Volt Pump and Nozzle for your diesel pickup is made to last! Featuring Titan's famous cross-linked polyethylene such as its invulnerability to corrosion, resistance to heat transfer and condensation, durability and maintenance of its good looks. It includes a pre-wired 12 volt transfer pump that does approximately 8 gallons per minute (equivalent to standard gas stations). The moter is UL Listed to U.S. and Canadian safety standards and comes complete with power cord, and manual nozzle. This fully baffled tank comes with a "Free Spinning" locking cap, mechanical fuel gauge, and all mounting hardware is included. This transfer tank fits most all full sized diesel pickups regardless of bed length.
Titan's
cross-linked polyethylene (XLHDPE) in-bed tank has a .250 nominal wall
thickness, is fully baffled and gives you the advantages of advanced
design and materials, as well as Titan's legendary quality and
durability. Featuring built-in Tie-Downs for your payload TITAN's
cross-linked polyethylene is not only corrosion proof it's nearly 200
times less heat and cold conductive than metal tanks. Each tank comes complete with a lifetime warranty on the tank body.
Features:
60-Gallon Capacity
For Diesel Fuel Only
12-Volt Pump With Nozzle
Tank Body Weighs Only 51lbs.
Durable, Corrosion Proof Finish
Easy Installation and Removal
Fits Under Tonneau Cover
Zinc Plated Hardware Features Tie-Downs
Looks Good On Any Truck
The Titan 5410050 Travel Trekker 50 Gallon In-Bed Auxiliary Fuel System is a better concept in auxiliary fuel systems. The Titan Travel Trekker is made of Titan's famous military grade, cross-linked polymer that is tougher than steel and longer lasting than aluminum. Its durability is legendary. Titan routinely tests their tanks using state-of-the-art computer simulations as well as physical drop tests. They fill their tanks completely and drop them 30 feet onto a steel plate, never losing a drop of liquid. They are so tough and well-proven that they are backed with a Lifetime Warranty.
There are no welds to fail and if you ever accidentally run your gooseneck hitch into your Travel Trekker you will most likely find it springs right back into shape. Also, soap, water and perhaps a little furniture spray polish is all you need to keep your tank looking new. The Travel Trekker is baffled to minimize fuel sloshing and compact enough that it can be installed in full-sized pickup beds without interfering with most in-bed hitches and tonneau covers.
With one touch, the remarkable Titan Electronic Controller transfers fuel from the Travel Trekker to the vehicles primary fuel tank until it is automatically stopped by the controller or the button is touched again. The controller monitors and reports the fuel level in the auxiliary system at all times. Controller installation is simple and never requires cutting into the vehicles wiring harness which could affect the manufacturers warranty. Fuel is pumped from the top of the tank which is safer and more environmentally responsible than gravity flow systems.
The system comes complete with all necessary installation components and detailed instructions. Whatever your passion, let us help you fuel it! Meets DOT FMCSA Title 49 Requirements.
Features:
50 Gallon Capacity
Lifetime Warranty
For Diesel Fuel Only
Never Any Corrosion
Electronic Controller Transfers Fuel
Does Not Interfere With In-Bed Hitches
Note: This tank does not work with trucks that have Rambox. The Titan 9900001 Aluminum Body Insulator Kit is required for aluminum body trucks. See related products below.
The Titan 5410060 60 Gallon In-Bed Fuel Tank w/ Electronic Transfer System for your diesel Pickup transfers up to 60 gallons of fuel on-the-go. The Titan Solid State, Electronic Controller lets you know how much fuel remains in your tank at all times. With the touch of a button, the controller pumps a preset amount of fuel into your main tank or another touch stops it at any time. The controller is very compact and can be easily installed anywhere in your cab. This fully baffled tank comes with a "Free-Spinning" locking cap and all mounting hardware is included. At 19-1/2" high the tank will fit under most standard tonneau covers. This system fits most all full-sized diesel pickups regardless of bed length.
Titan's cross-linked polyethylene (XLHDPE) in-bed tank has a .250 nominal wall thickness, is fully baffled and gives you the advantages of advanced design and materials, as well as Titan's legendary quality and durability. Featuring built-in Tie-Downs for your payload TITAN's cross-linked polyethylene is not only corrosion proof it's nearly 200 times less heat and cold conductive than metal tanks. This tank measures 59.50 Long at top, 48.50 at bottom x 21.00 wide x 19.5 high. Lifetime warranty on tank.
Features:
60-Gallon Capacity
For Diesel Fuel Only
Electronic Transfer System
Tank Body Weighs Only 51lbs.
Durable, Corrosion Proof Finish
Easy Installation and Removal
Fits Under Tonneau Cover
Zinc Plated Hardware Features Tie-Downs
Looks Good On Any Truck
5
5
1
The Titan 7020299 51 Gallon Mid-Ship Replacement Tank for your 1999-2007 Ford 7.3L / 6.0L Powerstroke Crew Cab, Short Bed Pickup provides you with additional fuel capacity for peace of mind whether driving down the highway or through remote rural areas. The increased capacity also gives you the ability to shop for lower fuel prices without having to fill-up every time you pass a fuel station.Most stock (or original equipment) tanks are relatively thin and made of materials like Linear Polyethylene. TITAN Fuel Tanks are made of corrosion-proof, High-Density Cross-Linked Polyethylene (XLHDPE), which is bonded molecularly. Also, the nominal thickness of all TITAN Tanks is ¼ of an inch.TITAN Fuel Tanks utilize common sense design features, which simplify installation. They reuse most of the stock components, including the existing sending unit. The tank itself is nearly indestructible, but light enough to be hefted by one or two people. While a vehicle hoist and transmission jack are ideal, hand tools will get the job done. Lifetime warranty on tank body.Features:51 Gallon CapacityFits Crew Cab, Short Bed Models23 Gallons Increased Capacity Over StockInstalls In Same Location As Factory Fuel TankShield Available Separately For Off-Highway Protection (see below)Note: Miles to Empty on dash display can be corrected by using custom aftermarket tuning like SCT or EZ-Lynk
andamp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;brandamp;gt;
The Titan 7020399 67 Gallon Mid-Ship Replacement Tank for your 1999-2007 Ford 7.3L / 6.0L Powerstroke Crew Cab, Long Bed Pickup provides you with additional fuel capacity for peace of mind whether driving down the highway or through remote rural areas. The increased capacity also gives you the ability to shop for lower fuel prices without having to fill-up every time you pass a fuel station.Most stock (or original equipment) tanks are relatively thin and made of materials like Linear Polyethylene. TITAN Fuel Tanks are made of corrosion-proof, High-Density Cross-Linked Polyethylene (XLHDPE), which is bonded molecularly. Also, the nominal thickness of all TITAN Tanks is ¼ of an inch.TITAN Fuel Tanks utilize common sense design features, which simplify installation. They reuse most of the stock components, including the existing sending unit. The tank itself is nearly indestructible, but light enough to be hefted by one or two people. While a vehicle hoist and transmission jack are ideal, hand tools will get the job done. Lifetime warranty on tank body.Features:67 Gallon CapacityFits Crew Cab, Long Bed Models31 Gallons Increased Capacity Over StockInstalls In Same Location As Factory Fuel TankShield Available Separately For Off-Highway Protection (see below)Note: Will not fit cab and chassis models. Miles to Empty on dash display can be corrected by using custom aftermarket tuning like SCT or EZ-Lynk
The Titan 7020599 60 Gallon Mid-Ship Replacement Tank for your 1999-2007 Ford 7.3L / 6.0L Powerstroke Extended/Crew Cab, Long Bed Pickup provides you with additional fuel capacity for peace of mind whether driving down the highway or through remote rural areas. The increased capacity also gives you the ability to shop for lower fuel prices without having to fill-up every time you pass a fuel station.
Most stock (or original equipment) tanks are relatively thin and made of materials like Linear Polyethylene. TITAN Fuel Tanks are made of corrosion-proof, High-Density Cross-Linked Polyethylene (XLHDPE), which is bonded molecularly. Also, the nominal thickness of all TITAN Tanks is ¼ of an inch.
TITAN Fuel Tanks utilize common sense design features, which simplify installation. They reuse most of the stock components, including the existing sending unit. The tank itself is nearly indestructible, but light enough to be hefted by one or two people. While a vehicle hoist and transmission jack are ideal, hand tools will get the job done. Lifetime warranty on tank body.
Features:
60 Gallon Capacity
Fits Crew/Extended Cab, Long Bed Models
24 Gallons Increased Capacity Over Stock
Installs In Same Location As Factory Fuel Tank
Shield Available Separately For Off-Highway Protection (see below) Note: Miles to Empty on dash display can be corrected by using custom aftermarket tuning like SCT or EZ-Lynk
andamp;amp;amp;amp;amp;lt;br>
The Titan 8020099 Replacement Ford Cab and Chassis Fuel Tank is an Extra Heavy Duty tank for your 1999-2010 Ford F350-550!! This frame mounted, after axle 40 Gallon Capacity replacement tank for Ford Cab and Chassis trucks and some E-Series vans with diesel engines. This tank is constructed of military grade cross-linked polyethylene (XLHDPE). Compatible with most bio-diesel fuel, this tank solves the problem of the lining failure and corrosion in the OEM steel tanks. It's corrosion proof material is extremely durable and features a drain plug for easy maintenance. Complete with rollover vent valve and vent hose. Fits in the place of the OEM stock tank and uses the existing sending unit. For diesel fueled vehicles only. Lifetime warranty on tank body.
Features:
Uses existing sending unit and stock straps=
Includes built-in drain plug for easy maintenance
Extremely durable cross-linked polyethylene
Application Notes: The Titan 40 Gallon Tank generally replaces after-axle diesel tanks for 1999-2010 Ford F350, F450 and F550 cab and chassis applications that utilize PS-123 sending units. It may also be used for diesel powered E-Series Vans which use PS-191 sending units with the Titan Sending Unit Adaption Kit 029910 (see below).
You can double check your application by contacting your local Ford dealer with your VIN number for a fuel tank parts breakdown. In most cases this product replaces any of the following Ford OEM Part Numbers: XC3Z9002AA, 6C3Z9002BA, 6C3Z9002A, 6C3Z9002E, 6C3Z9002F, 3C3Z9002AA, 5C3Z9002BB.
1999-2000 F-350 Cab and Chassis Owners: Many 1999-2000 F-350 Cab and Chassis models are equipped with a 37-gallon fuel tank. The 37-gallon factory mounting hardware must be replaced to install the Titan 40-gallon fuel tank. The additional Ford parts required can be found at your local Ford Dealer:
Ford Part#: 6C3Z9092AA - Fuel Tank Straps (2 Required)
Ford Part#: 3C3Z9A147AA - Fuel Tank Skid Plate
Titan Sending Unit Adaption Kit 029910 (See Below)
Note: Miles to Empty on dash display can be corrected by using custom aftermarket tuning like SCT or EZ-Lynk
Extra Heavy Duty!! Frame mounted, after axle 55 Gallon Capacity replacement tank for Ford Cut-A-Way with diesel engines. This tank is constructed of military grade cross-linked polyethylene (XLHDPE). Compatible with most bio-diesel fuel, this tank solves the problem of the lining failure and corrosion in the OEM steel tanks. It's corrosion proof material is extremely durable and features a drain plug for easy maintenance. Complete with rollover vent valve and vent hose. Fits in the place of the OEM stock tank and uses the existing sending unit. For diesel fueled vehicles only. Lifetime warranty on tank body.Features:55 Gallon Capacity Uses existing sending unit and stock strapsIncludes built-in drain plug for easy maintenanceExtremely durable cross-linked polyethyleneFits diesel "Cut-A-Way" Vans only.In most cases this product replaces the following original FORD equipment part numbers:Years 1999-2001: 2C2Z9002AYears 2002-2003: 2C2Z9002EBYears 2004-2008: 7C2Z9002FYears 2009-2010: 9C2Z9002FNote: Miles to Empty on dash display can be corrected by using custom aftermarket tuning like SCT or EZ-Lynk
The
Titan 029911 Fuel Tank Shield for your 1999-2010 Ford and GM Models is constructed from super-strong cross-linked polyethylene
material and
formed to fit the bottom of your Titan Tank. While not required for
regular on-road use, it's highly recommended that the shield be
purchased to provide protection for those who spend a lot of time in
off-road situations.
Features:
See Tank Applications Below
Cross-Linked Polyethylene Construction
Applications:
01-10 GM Duramax Tank models 7010101, 7010201 and 010301
99-10 Ford Powerstroke Tank models 7020299, 7020208, 7020599, and 7020508
The Transfer Flow 0800115195 40 Gallon Toolbox Refueling Tank Combo is a dual purpose fuel tank system that fits in both short and long bed pickups. The refueling combo is great for manually filling your fuel tank as well as filling other vehicles or equipment, along with providing storage for tools, equipment and whatever else you carry on-board your truck. Transfer Flow's refueling tanks come with a Department of Transportation Special Permit Number, allowing them to carry gasoline, diesel, gasohol, and kerosene fuels.
This toolbox and refueling tank combo comes pre-assembled with a 12-volt pump located inside the locking storage compartment. The fuel nozzle is mounted on the outside of the toolbox, and comes with a 12-foot hose. The storage compartment of the 40-gallon unit has about six cubic feet of storage space. Built entirely of 14-gauge aluminized steel which is powder coated black, this fuel tank is baffled to reduce fuel sloshing.
Tank Dimensions: 40 Gallons - 59" Length, 18-1/2" Width, 20-1/4" Height (add 3" width for mounting tabs)
Inside Storage Dimensions: 6 Cubic Feet, 56-3/4" Length, 16-5/8" Width, 9-3/4" Height
Features:
For Many Fuels
Toolbox and Refueling Tank Combo
Black Powdercoated, Aluminized Steel Construction
Stainless Steel Locking Paddle Handles
Gas-Filled Shocks For Easy Opening
6-Year Unlimited Mileage Warranty
Application Notes:
This tank will not fit on 2013-2015 Ram Pickups with 5th Wheel Prep Package
Truck Freight Item: Allow 1-2 Weeks for delivery. Truck freight charges apply.
The Transfer Flow 0800115457 100 Gallon Toolbox Refueling Tank Combo is a dual purpose fuel tank system that fits in long bed pickups. The refueling combo is great for manually filling your fuel tank as well as filling other vehicles or equipment, along with providing storage for tools, equipment and whatever else you carry on-board your truck. Transfer Flow's refueling tanks come with a Department of Transportation Special Permit Number, allowing them to carry gasoline, diesel, gasohol, and kerosene fuels.
This toolbox and refueling tank combo comes pre-assembled with a 12-volt pump located inside the locking storage compartment. The fuel nozzle is mounted on the outside of the toolbox, and comes with a 12-foot hose. The storage compartment of the 100-gallon unit has about 8 cubic feet of storage space. Built entirely of 14-gauge aluminized steel which is powder coated black, this fuel tank is baffled to reduce fuel sloshing.
Tank Dimensions: 100 Gallons - 50-3/4" Length, 33-3/4" Width, 25" Height (add 3" width and length for mounting tabs)
Inside Storage Dimensions: 8 Cubic Feet, 50-1/2" Length, 20-1/2" Width, 13" Height
Features:
For Many Fuels
Toolbox and Refueling Tank Combo
Black Powdercoated, Aluminized Steel Construction
Stainless Steel Locking Paddle Handles
Gas-Filled Shocks For Easy Opening
6-Year Unlimited Mileage Warranty
Truck Freight Item: Allow 1-2 Weeks for delivery. Truck freight charges apply.
Increase your pickup's fuel capacity and driving range with the Transfer Flow 0800116180 37 Gallon In-Bed Auxiliary Fuel Tank System! The Transfer Flow In-Bed 37 Gallon Auxiliary Tank is built from 14-gauge aluminized steel and features a durable, black powdercoated finish. To prevent fuel sloshing, the tank is also baffled in 3 places.
Using the patented technology of the Transfer Flow TRAX 3 Operation System, the dash mounted LCD displays the percentage of fuel in both the main and auxiliary fuel tanks, and lets you know when the fuel is being transferred from the auxiliary tank to the main fuel tank. The fuel transfer process is fully automatic!
The 37 Gallon Fuel Tank is small in size but still has incredible capacity. It's lower height allows it to be used with many popular cargo accessories as well as retractable bed covers and tonneau covers. Made in the USA! Some trucks require additional components. Please see application guide and application notes below.
Fuel Tank Dimensions: 37 Gallons - 50" Long x 19-1/2" Width x 17-7/8" Height (add 3" to height and width for fillneck and mounting brackets)
Features:
37 Gallon Capacity
TRAX 3 Operating System
Black Powdercoated Finish
For Diesel Fuel Only
6-Year Unlimited Mileage Warranty
Application Guide:
Fits Ford 1999-2015 full size trucks with short (6.5') and long (8') beds.
Fits GM 2001-2015 full size trucks with short (6.5') and long (8') beds.
Fits Dodge 1999-2015 full size trucks with short (6.5') and long (8') beds.
Application Notes:
2001-2004 GM 6.6L Duramax LB7 requires Fillneck Tee Kit (#0200114278)
2010-2012 Ram Mega Cab SRW trucks require Fillneck (#0500115461)
This tank may not fit on 2013-2015 Ram Pickups with 5th Wheel Prep Package
Truck Freight Item: Allow 1-2 Weeks for delivery. Truck freight charges apply.
The Transfer Flow 0800116187 50 Gallon Toolbox and Fuel Tank Combo is an all-in-one auxiliary fuel tank and storage box! Increase your fuel capacity and provide a secure place to hold tools, and other accessories you carry on-board your truck. This toolbox fuel tank is computer controlled, and the fuel transfer process is entirely automatic, by the TRAX 3 operating system! Included is a dash-mounted LCD that shows the percentage of fuel in the main and auxiliary tank. The LCD screen will also show you when the fuel transfer is occurring.
This 50 gallon fuel tank is constructed of 14-gauge aluminized steel and is mounted inside the shell of the bright aluminum diamond plate toolbox. The fuel fill access is on the drivers side on the front of the toolbox. The handy locking storage compartment has over 9 cubic feet of space and will keep your every day work tools, RV supplies, or hunting equipment safe and secure. Fits long bed pickups only.
Tank Dimensions: 50 Gallons - 61-3/4" Length, 27-1/2" Width, 20-1/8" Height
Inside Storage Dimensions: 60-3/4" Length, 25-3/16" Width, 8-3/4" Height
Features:
For Diesel Fuel Only
Toolbox and Fuel Tank Combo
Stainless Steel Locking Paddle Handles
Gas-Filled Shocks For Easy Opening
6-Year Unlimited Mileage Warranty
Application Guide:
Fits Ford 1999-2015 full size trucks with long (8') bed only.
Fits GM 2001-2015 full size trucks with long (8') bed only.
Fits Dodge 1999-2015 full size trucks with long (8') bed only.
Application Notes:
2001-2004 GM 6.6L Duramax LB7 requires Fillneck Tee Kit (#0200114278)
2010-2012 Ram Mega Cab SRW trucks require Fillneck (#0500115461)
Truck Freight Item: Allow 1-2 Weeks for delivery. Truck freight charges apply.