Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AFE BladeRunner Air Intake Manifold 46-10031 2215 5.00 AFE BladeRunner Air Intake Manifold 46-10031
3 5 1
$ 259.35
The AFE BladeRunner Air Intake Manifold 46-10031 represents the next generation in intake manifold design for your 2003-2004 Ford 6.0L Powerstroke. The Bladerunner intake manifold uses a unique MDV (Multiple Directional Vane) technology that features smoooth bends and directional vanes to form multiple air paths through the manifold. The new paths are smoother, shorter, and produce much smaller dead air zone for increased airflow and maximum performance. Constructed out of cast A356-T6 aluminum and uses a proprietary internal bolt design to help increase the flow and provide a solid seal void of leaks or deformaties. the Bladerunner comes with up to 5 ports for nitrous injections, gauges and other accessories used by hardcore enthusiasts. Features: CARB EO# D-550-10 Increased Throttle Response Lower Exhaust Gas Temperatures Cast A356-T6 Aluminum Construction 2 Pre-Drilled and Tapped 1/8" NPT Ports
AFE BladeRunner Air Intake Manifold 46-10041 4537 5.00 AFE BladeRunner Air Intake Manifold 46-10041
3 5 3
$ 259.35
The Bladerunner intake manifold represents the next generation in intake manifold design. The Bladerunner intake manifold uses a unique MDV (Multiple Directional Vane) technology to guide the air through the manifold maximizing air flow. Constructed out of cast A356-T6 aluminum and uses a proprietary internal bolt design to help increase the flow and provide a solid seal void of leaks or deformaties. the Bladerunner comes with 3 ports for nitrous injections, gauges and other accessories used by hardcore enthusiasts. Improves Torque up to 11.9 lbs x ft Increases Horsepower up to 4.3 HP + 59% Flow Increase Better turbo spool-up Better throttle response Lowers Exhaust Gas Temperatures Perfect complement with your turbo upgrade Patent Pending Multiple Directional Vane (MDV) Technology Cast A356-T6 Aluminum 2 Pre-tapped 1/8" NPT Ports Stainless Steel Hardware Will not void warranty C.A.R.B EO# D-550-10 The MDV Advantage Our MDV technology uses smooth bends and directional vanes to form multiple air paths through the manifold. These new paths are smoother and shorter, producing much smaller dead air zones for increased overall airflow to the engine.
Banks Power Ford Powerstroke High-Ram Intake Manifold 1927 16.00 Banks Power Ford Powerstroke High-Ram Intake Manifold
3.667 5 3
$ 399
An intercooler increases air density, allowing your engine to produce more power. So you wouldn't want to restrict the flow of air exiting the intercooler, right? Unfortunately, that's exactly what the stock piece does. Banks' High-Ram intake flows air much more efficiently, providing greater boost without the drawback of raising turbine back-pressure. In flow tests, the Ram-Air Intake delivers up to a 64% reduction in pressure loss. You'll enjoy improved acceleration and better fuel economy! Includes a 3-1/2" constant-diameter boost tube to flow the air from the intercooler without restriction. Features:Increased Airflow Enhanced Efficiency CARB EO# D-161-107
BD-Power 1041570 X-Flow Power Intake Elbow 19822 7.00 BD-Power 1041570 X-Flow Power Intake Elbow
$ 209
The BD-Power 1041570 X-Flow Power Intake Elbow is an easy way to improve throttle response on your 03-04 Ford 6.0L Powerstroke. The smooth radius of the bulbous intake plenum holds extra air that increases turbo response and efficiency. The unique design positions the bolts outside of the intake instead of going in the airstream causing additional turbulence. The two convenient ports (one pre-tapped) make it easy to monitor boost and install injectables such as nitrous or water-methanol injection. Features: 2 Ports (1 Pre-Tapped) Black Powdercoated Finish Increases Throttle Response
BD-Power 1041577 X-Flow Power Intake Elbow 1560 13.00 BD-Power 1041577 X-Flow Power Intake Elbow
5 5 1
$ 285
The BD-Power 1041577 X-Flow Power Intake Elbow w/ Intercooler Pipe is an easy way to improve throttle response on your 05-07 Ford 6.0L Powerstroke. The smooth, mandrel bends of the intercooler pipe increase flow while the large radius of the bulbous intake plenum holds extra air that increases turbo response and efficiency. The unique manifold design positions the bolts outside of the intake instead of going in the airstream causing additional turbulence. The two convenient ports (one pre-tapped) make it easy to monitor boost and install injectables such as nitrous or water-methanol injection. Features: 2 Ports (1 Pre-Tapped) Black Powdercoat Finish Increases Throttle Response
Mishimoto MMIE-F2D-03 Intake Elbow 27916 6.00 Mishimoto MMIE-F2D-03 Intake Elbow
$ 195.95
The Mishimoto MMIE-F2D-03 Intake Elbow increases flow and performance in your 2003-2007 Ford 6.0L Powerstroke. This intake elbow removes the tight bend that is evident on the stock intake elbow and allows for greater airflow! This intake elbow works with either the stock plastic or aluminum cold side pipe or the Mishimoto cold side pipe! The Mishimoto intake elbow also comes with a new silicone cold side boot with Duracore Technology to replace your worn out stock boot. In addition, Mishimoto also includes a new O-ring gasket and constant-tension T-bolt clamps for hassle-free installation. The Mishimoto intake elbow features two pre-tapped 1/8" NPT sensor bungs for any added sensors or injection systems to make this product extremely versatile. The indented beadroll allows the stock or Mishimoto boot to grip onto the edge of the pipe, eliminating the chance of boost leaks. The Mishimoto intake elbow comes in a polished, wrinkle black, or all-new wrinkle blue finish to really set your truck apart! Like all products, this also comes with the Mishimoto lifetime warranty you can trust! Features: Easy, Bolt-On Installation Multiple Finishes Available Increased Flow and Performance Pre-Drilled and Tapped 1/8" Ports Note: 2003-2004 models will require aftermarket engine tuning to install this manifold.
Pusher 6.0 Aluminum Intake Manifold 21305 3.00 Pusher 6.0 Aluminum Intake Manifold
$ 169
The Pusher 6.0 Aluminum Intake Manifold is an easy-to-install airflow and performance upgrade for your 05-07 Ford 6.0L Powerstroke. Built from 6061-T6 aluminum this manifold features mandrel bent tubing with a 1/2" thick flange. Designed for an easy installation the 1/2" thick flange features a machined o-ring groove for use with a factory Ford o-ring gasket along with two 1/8" ports on the back for water/methanol injection, nitrous injection or even a boost gauge. Features: Faster Spool-Up 3" Mandrel Bent Tubing 50-200 Drop In EGT's Increased Throttle Response 6061-T6 Aluminum Construction
Pusher 6.0S Intake Manifold 21306 5.00 Pusher 6.0S Intake Manifold
$ 139
The Pusher 6.0S Intake Manifold is an easy-to-install airflow and performance upgrade for your 05-07 Ford 6.0L Powerstroke. Built from 3" mandrel bent steel tubing, this manifold has a 1/2" thick flange with built in o-ring groove for re-installation with a factory Ford o-ring gasket. Featuring pre-drilled and tapped ports for simple installation of a water/methanol or nitrous system or for a boost gauge. Features: Faster Spool-Up 3" Mandrel Bent Tubing 50-200 Drop In EGT's Increased Throttle Response
S&B Filters 76-1003B Performance Intake Elbow 4816 7.00 S&B Filters 76-1003B Performance Intake Elbow
$ 280
The SandB Filters 76-1003B Performance Intake Elbow for your 03-04 Ford 6.0L Powerstroke will increase throttle response, performance and airflow. Powerstroke Performance Redefined SandB redesigned their original intake elbow for the Powerstroke 6.0L. Bigger Elbow for Better Airflow We've increased the diameter of the elbow and its openings to decrease restriction and increase airflow to your engine. Three Ports Give You Options We've included three ports on this elbow so you can inject and monitor without any drilling or tapping. Features: 3 Pre-Drilled and Tapped Ports Increased Elbow Size CARB EO Number: D-590-7
S&B Filters 76-1010B Performance Intake Elbow 17045 15.00 S&B Filters 76-1010B Performance Intake Elbow
$ 349
Enhance airflow in your 2005-2007 Ford 6.0L Powerstroke with the SandB Filters 76-1010B Performance Intake Elbow. The SandB Intake Elbow has been re-designed from their original version and includes an adapter, elbow, and tube. The larger diameter elbow and its openings to decrease restriction and increase airflow to your engine. To provide you with perfectly matched openings from the elbow to the stock opening SandB has CNC'd the adapter with tapered walls and O-ring seals. As an added bonus, each elbow is pre-drilled and tapped with 3 ports so you can injector or monitor your truck without the need to drill or tap. Features: 3 Pre-Drilled and Tapped PortsIncreased Elbow Size CARB EO Number:D-590-7
XDP 6.0L Intake Manifold XD216 32393 1.00 XDP 6.0L Intake Manifold XD216
$ 99.95
Increase throttle response and maximize airflow in your 2003-2007 Ford 6.0L Powerstroke with the XDP 6.0L Intake Manifold XD216. Designed as a bolt-on upgrade, the XDP 6.0L Intake Manifold is built from 3" mandrel-bent aluminum tubing with an extra thick 9/16" flange and a built-in o-ring gasket for a leak free seal. Each manifold comes pre-drilled and tapped with (2) 1/8" NPT ports so you can easily hook up a boost gauge, nitrous, or a water-methanol injection system. Features: 3" Mandrel Bent Aluminum Tubing Increased Airflow and Throttle Response (2) Pre-Drilled and Tapped 1/8" NPT Ports Installs Easily Using Existing Factory Components Works With Factory and Aftermarket Intercooler Plumbing Note: 2003-2004 models will require aftermarket tuning for installation. Warranty Info:Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. Click Here for full warranty policy.