Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Intercooler Upgrades

New Product Filters!
AFE 46-20140A Coupling & Clamp Kit 27536 5.00 AFE 46-20140A Coupling & Clamp Kit
$ 229.89
The AFE 46-20140A Coupling and Clamp Kit for your 2011-2016 Ford 6.7L Powerstroke is a replacement coupling kit for the AFE Intercooler Pipes in your truck. Reinforced Silicone: These coupler hose features 5-PLY reinforced high temperature material which meet or exceed SAEJ20 Standard. Coupler Hoses: Allow for expansion, movement, and extreme vibration between two hard pipes while reducing the possibility of connections coming apart or having your hard pipes or other equipment break. This kit contains heavy-duty 5-PLY couplings and high quality stainless steel spring loaded T-bolt clamps for strength. Features: 5-PLY reinforced high temp silicone couplers set Coupler hose allows for expansion, movement and vibration between two hard pipes. aFe replacement coupling kit Includes high quality stainless steel spring loaded T-bolt clamps Note: This coupling kit fits aFe intercooler tubes only (46-20148-B and 46-20149-B)
AFE 46-20144-B BladeRunner Intercooler Pipe Kit 27539 11.00 AFE 46-20144-B BladeRunner Intercooler Pipe Kit
5 5 1
$ 549.09
The AFE 46-20144-B BladeRunner Intercooler Pipe Kit for your 2011-2016 Ford 6.7L Powerstroke makes it easy to upgrade the intercooler pipes in your truck. This kit includes both the hot and cold side intercooler pipes and outflows your factory components by up to 32%! Flow and Performance: The intercooler tubes are constructed of 3" mandrel bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth bends and larger diameter tubing allow for low turbulence, increasing horsepower, torque and lowering EGTs. Installation is a snap: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes heavy-duty 5-PLY couplings and high quality stainless steel spring loaded T-bolt clamps for strength. The tubes also come equipped with two billet aluminum factory style quick connect adapters that works with the OEM intercooler. aFe Badging: Unique laser-cut aFe Power logo plates are welded-on for an aggressive style Features: Outflows stock intercooler tubes by up to 32% Increases horsepower and torque: 8Hp and 21Tq Replacement tubes for both hot and cold side of the intercooler Constructed out of 3" mandrel-bent aluminum tubing Powder-coated wrinkle-black for heat resistance and long-life Includes high quality stainless steel spring loaded T-bolt clamps Couplings constructed out of heavy-duty high-temp 5-PLY polyester for heat-resistance and durability Incorporates two billet aluminum, factory style quick connects for a secure installation Bolt-on Kit fits with the OEM intercooler
AFE 46-20148-B BladeRunner Hot Side Intercooler Pipe 27538 6.00 AFE 46-20148-B BladeRunner Hot Side Intercooler Pipe
$ 274.54
The AFE 46-20148-B BladeRunner Hot Side Intercooler Pipe for your 2011-2016 Ford 6.7L Powerstroke is a direct replacement for your factory hot side intercooler pipe. Built from 3" mandrel-bent tubing, this intercooler pipe outflows your factory pipe by 20%! Flow and Performance: The intercooler tube is constructed of 3" mandrel bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Installation is a snap: The intercooler tube utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes heavy-duty 5-PLY couplings and high quality stainless steel spring loaded T-bolt clamps for strength. This intercooler tube fits with the OEM intercooler. aFe Badging: A unique laser-cut aFe Power logo plate is welded-on for an aggressive style. Features: Outflows stock intercooler tube by 20% Increases horsepower and torque Constructed out of 3" mandrel-bent aluminum tubing Powder-coated wrinkle-black for heat resistance and long-life Bolt-on Kit fits with the with the OEM intercooler Includes high quality stainless steel spring loaded T-bolt clamps Couplings constructed out of heavy-duty high-temp 5-PLY polyester for heat-resistance and durability Hot-side tube replacement Incorporates a billet aluminum factory style quick connect for a secure installation
AFE 46-20149-B BladeRunner Cold Side Intercooler Pipe 27537 7.00 AFE 46-20149-B BladeRunner Cold Side Intercooler Pipe
$ 323.94
The AFE 46-20149-B BladeRunner Cold Side Intercooler Pipe for your 2011-2016 Ford 6.7L Powerstroke is a direct replacement for your factory cold side intercooler pipe. Built from 3" mandrel-bent tubing, this intercooler pipe outflows your factory pipe by 40%! Flow and Performance: The intercooler tube is constructed of 3" mandrel bent aluminum tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Installation is a snap: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes heavy-duty 5-PLY couplings and high quality stainless steel spring loaded T-bolt clamps for strength. The tubes also come equipped with a billet aluminum factory style quick connect adapter that works with OEM intercooler. aFe Badging: A unique laser-cut aFe Power logo plate is welded-on for an aggressive style. Features: Outflows stock intercooler tube by 40% Increases horsepower and torque Constructed out of 3" mandrel-bent aluminum tubing Powder-coated wrinkle-black for heat resistance and long-life Includes high quality stainless steel spring loaded T-bolt clamps Couplings constructed out of heavy-duty high-temp 5-PLY polyester for heat-resistance and durability Cold-side tube replacement Incorporates a billet aluminum factory style quick connect for a secure installation Bolt-on Kit fits with the OEM intercooler
ATS 2020273368 Charge Tube Upgrade 32092 15.00 ATS 2020273368 Charge Tube Upgrade
$ 332.5
Don't let your 2011-2016 Ford 6.7L Powerstroke leave you stranded! Upgrade your Intercooler Pipe before it bursts with the ATS 2020273368 Charge Tube Upgrade. Built from durable aluminum tubing, this bolt-on upgrade replaces the plastic factory cold side intercooler tube eliminating the weak link before it becomes an issue. This kit includes a sensor port, aluminum quick connect coupler, and strong reinforced boots and clamps for an easy installation. Features: Upgrades Factory Pipe Aluminum Construction Includes Factory Style Quick-Connect Adapter
H&S Motorsports 122001 Intercooler Pipe Upgrade 19995 3.00 H&S Motorsports 122001 Intercooler Pipe Upgrade
$ 285
The HandS Motorsports 122001 Intercooler Pipe Upgrade replaces the plastic factory cold side intercooler pipe on your 2011-2015 6.7L Powerstroke. Known to fail on completely stock trucks, the weak plastic unit is easily replaced with this durable, bead-rolled stainless steel pipe with t-bolt clamps. Since the OEM pipe snaps onto the factory air intake valve rather than using a traditional clamp, we include a beautiful CNC-machined aluminum piece that replaces the factory air intake valve to allow the use of a regular t-bolt clamp. Also included with the kit are all the brackets, clamps, and hardware required to complete the installation quickly and painlessly. Features: Bead-Rolled Stainless Steel Pipe Includes Required Components For Installation Note: This product MUST be used in conjunction with a tuning device that allows for removal of the throttle body and electronics, otherwise you WILL have a check engine light.
H&S Motorsports 122004 Intercooler Pipe Upgrade (OEM Replacement) 25796 5.00 H&S Motorsports 122004 Intercooler Pipe Upgrade (OEM Replacement)
5 5 1
$ 285
The HandS Motorsports 122004 Intercooler Pipe Upgrade for your 2011-2016 Ford 6.7L Powerstroke allows you to replace the factory plastic cold side intercooler pipe on your truck with a stainless steel, bead rolled pipe. The factory installed plastic intercooler pipe is known to literally burst at the worst possible times leaving you stranded on the side of the road. This easy upgrade improves reliability and underhood looks while eliminating the common failure part. While that may seem simple, there are other crucial components included in the kit to allow a quick, easy installation. Since the OEM pipe snaps onto the factory air intake valve rather than using a traditional clamp, HandS Motorsports includes a beautiful CNC-machined aluminum adapter piece that snaps into the OEM location. Also included with the kit are all the brackets, clamps, and hardware required to complete the installation quickly and painlessly. Because this is a factory replacement, there is no aftermarket tuning required. Features: Increased Reliability Bolt-In Replacement High Quality Stainless Steel Pipe Aftermarket Tuning Not Required Kit Includes: 1 HSM Throttle Body Adapter Assembly, 1 Stainless Steel Tube, 1 90-Deg. Silicone Boot, 1-Pack Installation Hardware.
H&S Motorsports 122010 Silicone Intercooler Pipe Upgrade 34186 4.00 H&S Motorsports 122010 Silicone Intercooler Pipe Upgrade
$ 255
The HandS Motorsports 122010 Silicone Intercooler Pipe for your 2011-2016 Ford 6.7L Powerstroke allows you to replace the factory plastic intercooler pipe on your truck with a 5-ply stainless steel reinforced silicone hose. The factory installed plastic cold side intercooler pipe is known to literally burst at the worst possible times leaving you stranded on the side of the road. This easy upgrade improves reliability and underhood looks while eliminating the common failure part. Rather than a stainless steel pipe, the reinforced silicone hose is easier to install, and less expensive than the other options on the market. In addition, the custom molded hose matches the exact contour and shape of the factory piping. This eliminates the need to relocate the factory power steering reservoir.While that may seem simple, there are other crucial components included in the kit to allow a quick, easy installation. HandS Motorsports includes a beautiful CNC-machined hose adapter to replace the factory air intake valve to allow the use of a regular t-bolt clamp. This Intercooler Pipe Upgrade removes the throttle body that was originally located in your OEM intake piping. Most aftermarket tuning will be capable of calibrating this valve out of the system. However, you must check with your tuning provider to confirm.Features:Increased Reliability Bolt-In Replacement Durable Silicone DesignBolt-In Cold Side Replacement Aftermarket Tuning Not RequiredNote: Aftermarket tuning required. If you cannot confirm that your tuning provider is able to support removal of the factory throttle body, the OEM replacement version of this item is recommended. (see related products).
H&S Motorsports 122011 Silicone Intercooler Pipe (OEM Replacement) 34185 4.00 H&S Motorsports 122011 Silicone Intercooler Pipe (OEM Replacement)
5 5 1
$ 255
The HandS Motorsports 122011 Silicone Intercooler Pipe for your 2011-2016 Ford 6.7L Powerstroke allows you to replace the factory plastic intercooler pipe on your truck with a 5-ply stainless steel reinforced silicone hose. The factory installed plastic cold side intercooler pipe is known to literally burst at the worst possible times leaving you stranded on the side of the road. This easy upgrade improves reliability and underhood looks while eliminating the common failure part. Rather than a stainless steel pipe, the reinforced silicone hose is easier to install, and less expensive than the other options on the market. In addition, the custom molded hose matches the exact contour and shape of the factory piping. This eliminates the need to relocate the factory power steering reservoir.While that may seem simple, there are other crucial components included in the kit to allow a quick, easy installation. Since the OEM pipe snaps onto the factory air intake valve rather than using a traditional clamp, HandS Motorsports includes a beautiful CNC-machined aluminum adapter piece that snaps into the OEM location. Also included with the kit are all the brackets, clamps, and hardware required to complete the installation quickly and painlessly. Because this is a factory replacement, there is no aftermarket tuning required. Features:Increased Reliability Durable Silicone DesignBolt-In Cold Side Replacement Aftermarket Tuning Not Required
Mishimoto MMICP-F2D-11CBK Cold Side Intercooler Pipe & Boot Kit 24817 13.00 Mishimoto MMICP-F2D-11CBK Cold Side Intercooler Pipe & Boot Kit
4 5 1
$ 318.95
The Mishimoto MMICP-F2D-11CBK Cold Side Intercooler Pipe and Boot Kit for your 2011-2016 Ford 6.7L Powerstroke solves the common issues with the factory supplied plastic pipe and intercooler boot, that are known to explode or burst due to the heat and boost levels of your 6.7L Powerstroke. The upgraded design from Mishimoto increases reliability, durability and performance. Constructed of mandrel-bent aluminum with a polished finish. A 100% CNC-machined 6061 aluminum coupling allows you to retain your trucks factory emissions components and allows for a quick install. Constructed of mandrel-bent aluminum with a polished finish. A 100% CNC-machined 6061 aluminum coupling allows you to retain your trucks factory emissions components and allows for a quick install. The Mishimoto cold-side pipe eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs. This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto Constant-Tension T-bolt Clamps for accurate and consistent holding power. This cold-side pipe and boot kit is the perfect addition to your 6.7L Powerstroke truck. It is made in the USA and includes the Mishimoto Lifetime Warranty. Features: Fits Cold Side DuraCore Silicone Boots Mandrel-Bent Aluminum Construction Specifications: Pipe Diameter: 3" (Lower Section) Pipe Diameter: 3.5" (Upper Section) Boot 1: 3" Boot 3: 3" To 3.5" Kit Includes: (1) Aluminum Intercooler Pipe w/ CNC Quick-Disconnect Flange (1) Aluminum Intercooler Pipe w/ CNC IAT Sensor Housing (2) Silicone Boots with DuraCore Technology (4) Constant-Tension T-Bolt Clamps (2) Aluminum Mishimoto "M" Logo Badges Note: The factory O-ring must be removed from the factory pipe and installed in the Mishimoto CNC-machined factory-style coupling in order to create a proper seal. LIFETIME WARRANTY Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer. A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product. The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
Mishimoto MMICP-F2D-11HBK Hot-Side Intercooler Pipe & Boot Kit 25703 13.00 Mishimoto MMICP-F2D-11HBK Hot-Side Intercooler Pipe & Boot Kit
$ 299.95
The Mishimoto MMICP-F2D-11HBK Hot-Side Intercooler Pipe and Boot Kit for your 2011-2016 Ford 6.7L Powerstroke increases reliability, durability and performance. The Mishimoto Hot-Side Pipe is constructed of mandrel bent aluminum with a polished finish. The engineers at Mishimoto designed a CNC-machined quick-disconnect flange to allow for an easy install in under one hour. The Mishimoto Hot-Side Pipe eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs. This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability Mishimoto Constant-Tension T-bolt Clamps are included for accurate and consistent holding power. This hot-side pipe and boot kit is the perfect addition to the Mishimoto 6.7L Powerstroke Aluminum Primary Radiator. This intercooler pipe kit is made in the USA and includes the Mishimoto Lifetime Warranty Features: Fits Hot Side DuraCore Silicone Boots Mandrel-Bent Aluminum Construction Specifications: Pipe Diameter: 2.75" (Turbo Section) Pipe Diameter: 3" (Intercooler Section) (1) 2.75 Constant-Tension T-Bolt Clamp (3) 3.25 Constant-Tension T-Bolt Clamps Silicone DuraCore Boot 1: 2.75 to 3.00 Silicone DuraCore Boot 2: 3.00 Kit Includes: (1) Aluminum Intercooler Pipe w/ CNC Quick-Disconnect Flange (1) Aluminum Intercooler Pipe (2) Silicone Boots with DuraCore Technology (4) Constant-Tension T-Bolt Clamps (2) Aluminum Mishimoto "M" Logo Badges Mishimoto Lifetime WarrantyInstallation Specs: 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M). LIFETIME WARRANTY Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer. A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product. The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
Mishimoto MMICP-F2D-11KBK Intercooler Pipe & Boot Kit 25704 20.00 Mishimoto MMICP-F2D-11KBK Intercooler Pipe & Boot Kit
$ 545.95
The Mishimoto MMICP-F2D-11KBK Intercooler Pipe and Boot Kit for your 2011-2016 Ford 6.7L Powerstroke increases reliability, durability and performance. This Intercooler Pipe and Boot Kit upgrades both the factory hot and cold pipes at the same time! The pipes are constructed of mandrel-bent aluminum with a polished finish and eliminate restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs. The engineers at Mishimoto designed CNC-machined quick-disconnect flanges and IAT sensor housing to allow for an easy install in less than two hours.This intercooler pipe and boot kit is direct fit, retaining all factory emissions components and does not require the use of a tuner. This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.To add even more reliability this kit includes Mishimoto Constant-Tension T-Bolt Clamps for accurate and consistent holding power. This pipe and boot kit is the perfect addition to the Mishimoto 6.7L Powerstroke Performance Primary Radiator. It is made in the USA and includes the Mishimoto Lifetime Warranty.Features: DuraCore Silicone Boots Includes Both Hot and Cold Side Mandrel-Bent Aluminum ConstructionSpecifications: 2.75 (Hot-Side Turbo Section)3.0 (Hot-Side Intercooler Section)3.0 (Cold-Side Intercooler Section)3.5 (Cold-Side Butterfly Valve Section)(1) 2.75 Constant-Tension T-Bolt Clamp(5) 3.25 Constant-Tension T-Bolt Clamps(1) 3.5 Constant-Tension T-Bolt Clamp(1) 4.0 Constant-Tension T-Bolt ClampBoot 1: 2.75 to 3.00Boot 2: 3.00Boot 3: 3.00"Boot 4: 3.00" to 3.50"Kit Includes: (2) Aluminum Intercooler Pipe w/ CNC Quick-Disconnect Flange(1) Aluminum Intercooler Pipe w/ CNC IAT Sensor Housing(1) Aluminum Intercooler Pipe(4) Silicone Boots with DuraCore Technology(8) Constant-Tension T-Bolt Clamps(2) Aluminum Mishimoto "M" Logo BadgesMishimoto Lifetime WarrantyInstallation Notes:The factory O-ring must be removed from the factory pipe and installed in the Mishimoto CNC-machined factory-style coupling in order to create a proper seal.27 in-lbs (3N*M) recommended for all Mishimoto T-Bolt and Constant-Tension T-Bolt Clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
Mishimoto MMINT-F2D-11 Air-To-Water Intercooler 34811 16.00 Mishimoto MMINT-F2D-11 Air-To-Water Intercooler
$ 1080
Increase flow in your 2011-2016 Ford 6.7L Powerstroke with the Mishimoto MMINT-F2D-11 Air-To-Water Intercooler. Internal leaks are common with the factory unit and drastically reduce the reliability of your truck. Mishimoto's Air-To-Water Intercooler is built with cast aluminum end tanks to eliminate the potential leak points of the cut and welded style end tanks. The cast aluminum end tanks are then welded to a robust bar-and-plate core instead of the stacked plate design of the factory unit. The Air-To-Water Intercooler is made for more than durability. Made to flow more than 22% more than stock, this flow increase translates 40 lb-ft of torque over stock. Each intercooler comes ready to install and is backed by Mishimoto's Lifetime Warranty. Includes Intercooler, mounting hardware, and Mishimoto's Lifetime Warranty. Tuning not required, works on stock and modified trucks.Features:22% Air Flow Increase+40 Lb-ft Torque IncreaseCast End Tanks For Durability Bar-And-Plate Core For Efficiency Mishimoto Lifetime Warranty Patent PendingSpecifications:EO# D-759-4Core Thickness: 4.48"Core Height: 6.69"Core Length: 10.59"Construction: Bar-and-Plate
Mishimoto MMINT-F2D-11K Air-To-Water Intercooler Kit 34815 38.00 Mishimoto MMINT-F2D-11K Air-To-Water Intercooler Kit
$ 1593
Flow 22% more air than the factory intercooler in your 2011-2016 Ford 6.7L Super Duty with the Mishimoto MMINT-F2D-11K Air-To-Water Intercooler Kit. Mishimoto constructs their intercooler with a bar-and-plate core then precision TIG welds the cast aluminum end tanks on for a much more reliable and robust design versus the factory stamped and stacked plate design. Besides being a superior design, the cast end tanks reduce potential failure points while the included aluminum intercooler pipes and couplers further add to the durability of this complete kit. The Mishimoto Air-To-Water Intercooler Kit not only increases airflow and durability, it also adds more power! That 22% more airflow made during bench testing directly translates to a dyno proven 40 lb-ft of torque more! Backed by Mishimoto's Lifetime Warranty, each intercooler comes ready to install and includes the intercooler, mounting hardware, intercooler pipes, silicone couplers, clamps and Mishimoto's Lifetime Warranty. Tuning not required, works on stock and modified trucks.Features:22% Air Flow Increase+40 Lb-ft Torque IncreaseConstant Tension ClampsBar-And-Plate Core For EfficiencyHot and Cold Side Intercooler PipesTIG Welded Cast End Tanks For Durability Mishimoto Lifetime Warranty Patent PendingSpecifications:EO# D-759-4Core Thickness: 4.48"Core Height: 6.69"Core Length: 10.59"Construction: Bar-and-Plate
XDP 6.7L Intercooler Pipe Upgrade (OEM Replacement) XD305 34712 3.00 XDP 6.7L Intercooler Pipe Upgrade (OEM Replacement) XD305
$ 275.95
Replace a common failure point in your 2011-2016 Ford 6.7L Powerstroke to increase long term reliability with the XDP 6.7L Intercooler Pipe Upgrade (OEM Replacement) XD305. The XD305 replaces your factory plastic intercooler pipe with a mandrel-bent, bead rolled 3" steel pipe for extreme durability. From the factory, your truck is equipped with a plastic intercooler pipe that can't handle stock power levels! Add in performance tuning and an aftermarket exhaust and your intercooler pipe will be the next thing to go. Unfortunately, it won't just come apart when you go to start your truck one day. It will fail while you're going down the track, or pulling a load up a steep grade. Either way, it will leave you in 2nd place, or stranded on the side of the road. Built only with top quality components, the XDP 6.7L Intercooler Pipe Upgrade is made for an easy installation. The mandrel-bent 3" tubing provides you with a durable replacement and the reinforced silicone couplers are built to last. The XD305 includes a specially machined adapter that snaps into the OEM location and does not require any modifications or aftermarket tuning for installation.Features:Cold Side UpgradeIncreased Reliability 3" Mandrel-Bent Tubing No Aftermarket Tuning Required! Black Anodized CNC Machined Billet Adapter Reinforced Silicone Couplers and T-Bolt ClampsWarranty Info: Products manufactured by XDP carry a 1-Year warranty against defects in materials and craftsmanship. The Warranty is Limited to one (1) year from the date of sale and limited solely to the parts contained within the product's kit. Click Here for full warranty policy.