Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Alliant AP0067 Glow Plug Wire Harness Extension 25302 1.00 Alliant AP0067 Glow Plug Wire Harness Extension
$ 34.16
The Alliant AP0067 Glow Plug Wire Harness Extension for your 1994-2002 GM 6.5L Diesel is designed to provide protection for the glow plug wires used on cylinders 4 and 6 to provide protection due to its close proximity to the exhaust manifold. Features: Provides Protection To Glow Plug Wires For Use On Cylinders 4 and 6 Replaces OEM Part#: 15320904
ARP Diesel Head Stud Kit 130-4062 14801 11.00 ARP Diesel Head Stud Kit 130-4062
$ 161.99
To overcome head gasket failures that can occur in diesel engines employed in truck and RV applications, industry leader ARP has introduced extra heavy-duty head studs for the popular Ford, Dodge and GM powerplants. These ARP studs are rated at 220,000 psi tensile strength, and provide the clamping force required to keep cylinder heads from lifting due to higher combustion pressures. The studs are manufactured in ARP's Santa Paula, CA plant from proprietary ARP 2000 material, with threads rolled after heat-treat to provide optimum fatigue strength. They are centerless ground to assure perfect concentricity. The ends of the studs are broached to facilitate easy installation. This feature also enables the cylinder head to be removed in tight quarters. Also included in each kit are heat-treated, chrome-moly steel 12-point nuts and parallel-ground washers. They are black oxide finished for extra durability. Features: ARP 2000 Material 220,000 PSI Tensile Strength Chrome-moly Steel, 12-Point Nuts Parallel-Ground Washers
BD-Power 1036530 40" PMD Extension Cable (For Black PMD) 15688 1.00 BD-Power 1036530 40" PMD Extension Cable (For Black PMD)
$ 42.7
The BD-Power 1036530 40" PMD Extension Cable allows you to easily relocate the PMD in your 1994-2000 GM 6.5L Diesel. The PMD is an electronic control module that is mounted to the side of the 6.5L Injection Pump. As with most electronics, they begin to fail when the heat in the surround environment becomes too much. The area which the pump/driver is located is very susceptible to this harsh environment. Use this extension cable to relocate your PMD away from the heat! Features:40" LengthFor Black Stanadyne and D-Tech PMD
BD-Power 1036531 72" PMD Extension Cable (For Black PMD) 15689 1.00 BD-Power 1036531 72" PMD Extension Cable (For Black PMD)
$ 47.45
The BD-Power 1036531 72" PMD Extension Cable allows you to relocate the PMD in your 1994-2000 GM 6.5L Diesel. The PMD is an electronic module mounted to the side of the injection Pump on your engine. Like most electronics, it cannot handle the heat in this harsh environment. This 72" harness allows you to relocate the PMD out of the heat for a longer lasting component. Features:72" LengthFor Black Stanadyne and D-Tech PMD
Bostech WH01854 40" PMD Relocation Harness 28438 1.00 Bostech WH01854 40" PMD Relocation Harness
$ 39.95
The Bostech WH01854 40" PMD Relocation Harness for your 1994-2000 GM 6.5L Diesel allows you to relocate your PMD to avoid the heat in your engine bay. Features: 40" Long 6 Pin Connector PMD Relocation Harness 13 Month Unlimited Mileage Warranty Bostech Old Part#: ISK854
Clevite MS-2091P Main Bearing Set (Standard) 100140 1.52 Clevite MS-2091P Main Bearing Set (Standard)
$ 53.57
Get quality bearings for your 1982-1998 GM 6.2L/6.5L Diesel when you purchase and install the Clevite MS-2091P Main Bearing Set (Standard). Cleavite P-Series Bearings are high crush for maximum retention and have a a reduced overlay thickness to prevent overlay fatigue. Features:High PerformanceMaximum RetentionReduced Overlay Thickness
Cometic C5884 MLS Head Gasket (Left) 30552 5.00 Cometic C5884 MLS Head Gasket (Left)
$ 91.92
The Cometic C5884 MLS Head Gasket for your 1991-1995 GM 6.5L Diesel is comprised of multiple embossed layers of both viton coated and uncoated stainless steel. The embossed outer layers of the gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. This design requires less clamp load creating less bore distortion and conforms load distribution across the sealing area. The center or shim layer is an uncoated stainless steel layer which can be varied to accommodate multiple thickness requirements. No sealants or re-torque are required. MLS Gasket Features: Provide maximum sealing performance for today's high output engines and require no sealants Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials. No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion Features and Specs: 4.100 Bore MLS Construction Left Side Head Gasket Several Thicknesses Available
Cometic C5885 MLS Head Gasket (Right) 30564 2.00 Cometic C5885 MLS Head Gasket (Right)
$ 91.92
The Cometic C5885 MLS Head Gasket (Right) for your 1991-1995 GM 6.5L Diesel is comprised of multiple embossed layers of both viton coated and uncoated stainless steel. The embossed outer layers of the gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. This design requires less clamp load creating less bore distortion and conforms load distribution across the sealing area. The center or shim layer is an uncoated stainless steel layer which can be varied to accommodate multiple thickness requirements. No sealants or re-torque are required. MLS Gasket Features: Provide maximum sealing performance for today's high output engines and require no sealants Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials. No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion Features and Specs: 4.100 Bore MLS Construction Right Side Head Gasket Several Thicknesses Available
Dorman 300-702 Vacuum Pump Pulley 29412 1.00 Dorman 300-702 Vacuum Pump Pulley
$ 68.95
The Dorman 300-702 Vacuum Pump Pulley is an integral part of the drive system for the belt driven vacuum pump in your 1988-2000 GM 6.2L/6.5L Diesel. Dormans Vacuum Pump Pulley restores the vacuum pump to original operation, thereby optimizing the performance of the vacuum system. It is recommended for replacement whenever you service the vacuum pump. Features: Direct Fit High Quality Construction Replaces GM Part#: 15589757 Application Notes: 1988-1995 Models - RPO Code C60 (Front Manual Temperature Controls)
Dorman 594-037 Harmonic Balancer 29207 6.00 Dorman 594-037 Harmonic Balancer
$ 94.95
The Dorman 594-037 Harmonic Balancer is a direct replacement for your 1988-2002 GM 6.2L/6.5L Diesel. Durable and sleek, Dorman Harmonic Balancers feature a stress-resistant rubber bond that withstands the damaging effects of heat, salt, ozone and general wear and tear. The ductile steel construction allows for improved tensile and impact strength, safeguarding the engine and maintaining fuel efficiency year after year. Dorman Harmonic Balancers undergo detailed dimensional checks of the full assembly and critical components to ensure the strength and integrity of the part. Features: Direct Replacement Replaces GM Part#: 106751, 12557345
Dorman 625-147 Engine Oil Cooler Line 29394 1.00 Dorman 625-147 Engine Oil Cooler Line
$ 57.95
The Dorman 625-147 Engine Oil Cooler Line for your 1997-2000 GM 6.5L Diesel is designed to resist corrosion and leakage. Dormans Engine Oil Cooler Hose Assembly is engineered for long-lasting performance. Ensure the smooth transfer of oil from the engine to the cooler, and protect your engine in the process. Features: Direct Fit Quality Tested To Ensure Function Replaces GM Part#: 15104800, 15158542 Application Note: Connecting nut is 27mm across flats Inlet, driver side.
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:

  • Effective 3/16 we have shifted Customer Service hours to 8:30 – 7:00pm EST. To ensure compliance with New Jersey’s recent curfew.
  • Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
  • Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
  • All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.