Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Fluids & Filters

New Product Filters!
AFE Pro Guard D2 Fuel Filter 44-FF001 12290 1.00 AFE Pro Guard D2 Fuel Filter 44-FF001
$ 32.29
Pro-Guard D2 Fuel Filters deliver increased flow and efficiency that are demanded in a Diesel environment. These filters use an exclusive NF21 synthetic media for maximum filtration and minimal flow restriction. aFe Pro-Guard D2 fuel filters have up to a 99% filter efficiency for maximum protection.
Champion 4013 Pro-Grade Synthetic Blend Snow Plow Hydraulic Oil 35607 2.00 Champion 4013 Pro-Grade Synthetic Blend Snow Plow Hydraulic Oil
$ 9.2
Ensure the performance of your snow plow system, even in the most extreme temperatures, with the Champion 4013 Pro-Grade Synthetic Blend Snow Plow Hydraulic Oil. This long-life hydraulic oil is formulated using wax-free base oils with extremely low pour points and features top-tier anti-wear performance, excellent demulsibility and air release, as well as high thermal and oxidation stability. Due to its very high viscosity index, Champion's Snow Plow Oil delivers exceptional viscosity and cold-flow, protecting against freeze-up in temperatures down to -65F! Perfect for use in residential and even the most demanding commercial applications. Features:Synthetic BlendConditions SealsWax-Free Base OilsExcellent Cold-Flow Properties-65F Temperature PerformancePrevents and Protects Against Freeze-Up
Champion 4054H DOT 4 Brake Fluid 34242 3.00 Champion 4054H DOT 4 Brake Fluid
$ 8.35
Maintain proper performance of your braking system with the Champion 4054H DOT 4 Brake Fluid. This premium DOT 4 Brake Fluid is a high-boiling, glycol-based brake fluid for disk, drum, and ABS braking systems. Champion DOT 4 Brake Fluid exceeds the specifications of Federal Motor Vehicle Safety Standard (FMVSS) number 116, and SAE J1704.Features:1 Quart BottleHigh Boiling Point Protects and Conditions Elastomer SealsExcellent Lubricity and Cold-Flow Properties Provides Corrosion and Oxidation Resistance Product Specifications:Dry Boiling Point °F (°C) - 494 (256)Wet Boiling Point °F (°C) - 322 (161)Viscosity @ 100°C, mm2/s - 2.2Viscosity @ -40°C, mm2/s - 1,325pH - 8.4Elastomer Compatibility - PassCorrosion Protection - PassOxidation Resistance - Pass
Champion 4054K DOT 4 Brake Fluid 34241 1.00 Champion 4054K DOT 4 Brake Fluid
$ 3.6
Maintain proper performance of your braking system with the Champion 4054K DOT 4 Brake Fluid. This premium DOT 4 Brake Fluid is a high-boiling, glycol-based brake fluid for disk, drum, and ABS braking systems. Champion DOT 4 Brake Fluid exceeds the specifications of Federal Motor Vehicle Safety Standard (FMVSS) number 116, and SAE J1704.Features:12-Ounce BottleHigh Boiling Point Protects and Conditions Elastomer SealsExcellent Lubricity and Cold-Flow Properties Provides Corrosion and Oxidation Resistance Product Specifications:Dry Boiling Point °F (°C) - 494 (256)Wet Boiling Point °F (°C) - 322 (161)Viscosity @ 100°C, mm2/s - 2.2Viscosity @ -40°C, mm2/s - 1,325pH - 8.4Elastomer Compatibility - PassCorrosion Protection - PassOxidation Resistance - Pass
Champion 4182H Power Steering Fluid 34244 1.00 Champion 4182H Power Steering Fluid
$ 5.54
Maintain performance in your power steering system with Champion 4182H Power Steering Fluid. Champion Power Steering Fluid has been specially formulated with hydrotreated base oils and has a balanced additive chemistry for effective performance and protection in older power steering systems, or those specifying GM Dexron IID, GM Dexron III or Ford Mercon fluids. Champion friction modifier technology minimizes squeal or squawk in power steering systems, and the inhibitor technology and anti-wear additives protect your pump, and other parts from corrosion, oxidation, and scuffing. The highly effective seal conditioners prevent hardening and shrinking of seals keeping them soft and pliable. Features:Protects Against CorrosionEliminates Squeal and Squawk Extends Pump Life and Reduces WearLow Foam Reduces Cavitation Wear Low Temperature Performance Ensures Startup LubricationRecommended for use in vehicle power steering systems requiring the following specifications: GM 9985010 SaginawDaimler/Chrysler MS5931F, MS1872Ford M2C138-CJ, ESW-M2C128Dexron IID, IIIMerconChrysler ATF+3Accura/Honda (Prior to 2007)
Champion 4580K 80% Ether Professional Grade Starting Fluid 35583 1.00 Champion 4580K 80% Ether Professional Grade Starting Fluid
$ 5.85
Use Champion 4580K 80% Ether Professional Grade Starting Fluid to get your gas or diesel engine started in temperatures down to -70F. This professional grade starting fluid is not only the strongest in the industry but contains upper cylinder lubricant to provide an added layer of protection. Getting faster starts reduces wear on batteries and starters. Champion 4580K Professional Grade Starting Fluid is ideal for use with cars, trucks, tractors, generators, buses, marine engines, outboards and power mowers. Features:80% EtherProfessional GradeWorks Down to -70FContains Upper Cylinder Lubricant
EZ Oil Drain Valve EZ-107 30278 1.00 EZ Oil Drain Valve EZ-107
$ 23.95
The EZ Oil Drain Valve EZ-107 eliminates the hassle and mess of draining the oil in your 1996-2000 GM 6.5L Diesel. The EZ Oil Drain Valve replaces the standard oil drain plug, making oil changes easier, saving valuable time and expenses. With just the push of a lever, you can easily change your engine oil without the mess! The EZ Oil Drain Valve is Constructed from corrosion-resistant forged brass, stainless steel, and a nickel-plated coating. Built to withstand extreme temperatures and harsh environmental factors such as salt, water, oil, chemicals... etc the EZ Oil Drain Valve is proven solid and will outlast your engine. With a complete length of only about 7/8" long, this valve only extends out a 1/2 more than the standard plug head from the oil pan. Will my EZ Oil Drain Valve open up on the road? No. The valve's effective locking system requires a double action mechanism to open it, this prevents any accidental openings. Unlike spring loaded gate valves, the heavy duty ball valve construction will withstand any engine vibration. In extreme conditions such as off-road, logging and agricultural applications (corn fields, brush areas..etc), you can add a "hose clip" around the body of the valve right above the lever (not included). This will provide additional safety and security. A typical hose clip can be purchased at any hardware store and will keep the level in the closed and locked position at all times. To keep things even cleaner during routine maintenance, the EZ Oil Drain Valve can be used with the optional Hose Ends (sold separately, see related items below). The Hose Ends easily screw into the valve body allowing you to attach a hose to the valve for convenience and cleanliness. Features: M12-1.75 No Mess Oil Changes No Need To Be Removed - Eliminates Stripped Pans Double Action Mechanism - No Accidental Openings Forged Brass, Stainless Steel and Nickel Plated - Will Outlast Your Engine
Fumoto Engine Oil Drain Valve F-101 12887 1.00 Fumoto Engine Oil Drain Valve F-101
$ 23.95
Introducing the best way to change oil, the Engine Oil Drain Valve. Install this valve and you can drain your engine oil without tools and without mess. Just lift the lever of this solid brass ball valve and give it a quarter turn to open it. Return the lever to its original position and it locks closed, double sealed to prevent leakage. The Engine Oil Drain Valve is made of corrosion resistant forged brass and stainless steel. The ball valve design provides a straight flow for efficient drainage and a perfect seal when closed. Frozen drain plug and stripped threads are eliminated forever. Drawing samples for oil analysis is as easy as one-two-three. Sizes to fit all cars, light trucks vans heavy-duty trucks and buses. Also fits RVs, marine engines and industrial equipment. The Engine Oil Drain Valve has been tested and granted "Genuine Parts" status by 6 major motor vehicle manufacturers in Japan, including Toyota, Nissan, Mazda, Mitsubishi, Subaru and Isuzu. These approvals were not granted easily and gaining them was a testimony to the quality and durability of Engine Oil Drain Valve. In the United States, the Engine Oil Drain Valve is being installed at the factory level on some of the vehicles/equipment made by Ford, Kohler, Freightliner, Caterpillar, JLG, GEHL, Ingersoll-Rand, Sullair, Toyota, Case, Magnetek, Timberjack, Lincoln Electric, Vermeer, Baldor, Terex, Deutz, Phaser Marine Generator and etc. Installation: Remove original drain plug and drain oil into acceptable receptacle. Insert Engine Oil Drain Valve with gasket* and tighten. Do not over tighten. Make sure valve is closed and refill crankcase. N-Series Valve: Unlike the standard Engine Oil Drain Valve which was designed for automobile and truck applications, the N-SERIES valve is equipped with a Nipple to enable the operator to attach a hose and drain the engine oil out of tight spots and away where access to the plug itself and resulting mess are often problems. Like the standard Engine Oil Drain Valve, this spring assisted ball valve replace standard oil drain plug making oil changes easier and saving valuable time. Also ideal for oil sampling analysis as a small amount of oil can be drawn without shutting off the engine. The N-SERIES Engine Oil Drain Valve takes the mess out of routine maintenance on industrial engines. "N-SERIES" valves are not recommended for cars with low ground clearance. Please make sure there is enough distance from the ground. Warning: For users under extreme conditions: If you are using the Engine Oil Drain Valve on off-road vehicles such as farm tractors and logging equipment under extreme environment (i.e. corn fields, brush areas), it is recommended that a hose clip as shown below be used for extra safety and security. The hose clip, which can be purchased at any hardware stores, will firmly keep the lever in the locked position at all times. Limited Warranty Fumoto Engineering of America offers a LIFE TIME WARRANTY on its product, against faulty workmanship and/or material to the original purchaser (with proof of purchase). For any defective product, Fumoto Engineering of America will replace the product at no charge. Fumoto Engineering of America will also indemnify any consequential damages to the engine/vehicle which are directly caused by the defective product. This warranty does not cover any damages due to misuse, abuse, negligence or accident. This warranty is valid only in the United States and Canada. Thread Size: 1/2"-20 UNF
Fumoto Engine Oil Drain Valve F-107 12890 1.00 Fumoto Engine Oil Drain Valve F-107
$ 23.95
Introducing the best way to change oil, the Engine Oil Drain Valve. Install this valve and you can drain your engine oil without tools and without mess. Just lift the lever of this solid brass ball valve and give it a quarter turn to open it. Return the lever to its original position and it locks closed, double sealed to prevent leakage. The Engine Oil Drain Valve is made of corrosion resistant forged brass and stainless steel. The ball valve design provides a straight flow for efficient drainage and a perfect seal when closed. Frozen drain plug and stripped threads are eliminated forever. Drawing samples for oil analysis is as easy as one-two-three. Sizes to fit all cars, light trucks vans heavy-duty trucks and buses. Also fits RVs, marine engines and industrial equipment. The Engine Oil Drain Valve has been tested and granted "Genuine Parts" status by 6 major motor vehicle manufacturers in Japan, including Toyota, Nissan, Mazda, Mitsubishi, Subaru and Isuzu. These approvals were not granted easily and gaining them was a testimony to the quality and durability of Engine Oil Drain Valve. In the United States, the Engine Oil Drain Valve is being installed at the factory level on some of the vehicles/equipment made by Ford, Kohler, Freightliner, Caterpillar, JLG, GEHL, Ingersoll-Rand, Sullair, Toyota, Case, Magnetek, Timberjack, Lincoln Electric, Vermeer, Baldor, Terex, Deutz, Phaser Marine Generator and etc. Installation: Remove original drain plug and drain oil into acceptable receptacle. Insert Engine Oil Drain Valve with gasket* and tighten. Do not over tighten. Make sure valve is closed and refill crankcase. N-Series Valve: Unlike the standard Engine Oil Drain Valve which was designed for automobile and truck applications, the N-SERIES valve is equipped with a Nipple to enable the operator to attach a hose and drain the engine oil out of tight spots and away where access to the plug itself and resulting mess are often problems. Like the standard Engine Oil Drain Valve, this spring assisted ball valve replace standard oil drain plug making oil changes easier and saving valuable time. Also ideal for oil sampling analysis as a small amount of oil can be drawn without shutting off the engine. The N-SERIES Engine Oil Drain Valve takes the mess out of routine maintenance on industrial engines. "N-SERIES" valves are not recommended for cars with low ground clearance. Please make sure there is enough distance from the ground. Warning: For users under extreme conditions: If you are using the Engine Oil Drain Valve on off-road vehicles such as farm tractors and logging equipment under extreme environment (i.e. corn fields, brush areas), it is recommended that a hose clip as shown below be used for extra safety and security. The hose clip, which can be purchased at any hardware stores, will firmly keep the lever in the locked position at all times. Limited Warranty Fumoto Engineering of America offers a LIFE TIME WARRANTY on its product, against faulty workmanship and/or material to the original purchaser (with proof of purchase). For any defective product, Fumoto Engineering of America will replace the product at no charge. Fumoto Engineering of America will also indemnify any consequential damages to the engine/vehicle which are directly caused by the defective product. This warranty does not cover any damages due to misuse, abuse, negligence or accident. This warranty is valid only in the United States and Canada. Thread Size: 12mm-1.75
Lucas Oil 10799 Contact Cleaner 35580 1.00 Lucas Oil 10799 Contact Cleaner
$ 7.5
The Lucas Oil 10799 Contact Cleaner contains a unique blend of solvents, cleaning agents and propellants designed to remove oil, dirt, and moisture from contact points. The non-chlorinated formula dries quickly and won't leave behind any residue. Use contact cleaner to maintain and clean electrical parts that have exposure to high levels of oil, dirt, and debris for long lasting reliable performance. Features:Leaves No ResidueNon-Chlorinated FormulaRemoves Oil, Dirt, and MoistureCleans and Maintains Electrical PartsCompatible with Metals and Polymers
Lucas Oil 10823 Power Steering Fluid 35577 0.75 Lucas Oil 10823 Power Steering Fluid
$ 2.99
The Lucas Oil 10823 Power Steering Fluid is formulated with special base oils and additives to improve your vehicle's power steering performance. A blend of supplemental oxidation inhibitors help extend fluid life while a mild seal swell agent conditions o-rings and seals to help prevent small leaks. The added lubricity helps to reduce wear and stop pump squealing for a smooth operating power steering system. Features:Increased LubricityStops Pump SquealExtended Fluid LifePrevents Small Leaks
Lucas Oil 10825 DOT 3 Synthetic Brake Fluid 35578 1.20 Lucas Oil 10825 DOT 3 Synthetic Brake Fluid
$ 2.99
The Lucas Oil 10825 DOT 3 Synthetic Brake Fluid is a non-petroleum-based fluid designed to be used in all disc and drum brake systems as well as hydraulic clutches that require DOT 3 brake fluid. With a minimum wet boiling point of 284 degrees F, this full synthetic brake fluid meets the demand of today's high powered vehicles and will also safely blend with other brands of DOT 3 brake fluids. Meets FMVSS 116 specification and SAE J1703. Features:DOT 3Full SyntheticBlends With Other Brands284 Degree Wet Boiling Point
Lucas Oil 10827 DOT 4 Synthetic Brake Fluid 35582 1.25 Lucas Oil 10827 DOT 4 Synthetic Brake Fluid
$ 3.99
The Lucas Oil 10827 DOT 4 Synthetic Brake Fluid features a high quality blend of polyethylene glycol ethers and additives that maintains seals while protecting against rust and corrosion in your brake system. Use in brake or clutch systems where DOT 4 fluid is specified. Lucas DOT 4 Brake Fluid blends safely with other brands of DOT 4 brake fluid and meets or exceeds the industry minimum dry boiling point of 446 degrees F. Features:DOT 4Fully SyntheticMaintains Healthy SealsProtects Against Corrosion446 Degree F Dry Boiling Point
Lucas Oil 10906 Non-Chlorinated Brake Parts Cleaner 35579 1.08 Lucas Oil 10906 Non-Chlorinated Brake Parts Cleaner
$ 3.99
Effectively remove brake fluid, grease, dust, and other contaminants with the Lucas Oil 10906 Non-Chlorinated Brake Parts Cleaner. A powerful spray pattern quickly removes contaminants from brake linings, pads, cylinders, springs, drums, and any other brake components to provide excellent performance without leaving any residue. The non-chlorinated formula makes it VOC compliant in all 50 states and the label is compliant with GHS regulations. Features:50-State LegalLeaves No ResidueRemoves ContaminantsNon-Chlorinated FormulaFor Use on ABS, Disc, and Drum Brakes
Lucas Oil 11043 Penetrating Oil 35581 1.00 Lucas Oil 11043 Penetrating Oil
$ 6.99
Free up rusted-on nuts and bolts or keep hinges from squealing with the Lucas Oil 11043 Penetrating Oil. This superior penetrant is fortified with powerful corrosion and rust inhibitors that leaves behind a microscopic film to protect parts exposed to the elements. Use Lucas Penetrating Oil all around the home, garage, shop, and office or anywhere else you want to stop annoying squeaks. The 360 degree applicator allows you to use the can in any position, even upside down!Features:Low OdorSilicone FreePenetrates RustUse Can in any PositionProvides Lasting LubricationFortified with Anti-Seize Agents
Royal Purple 01326 Max EZ Power Steering Fluid 24978 2.00 Royal Purple 01326 Max EZ Power Steering Fluid
$ 4.86
The Royal Purple 01326 Max EZ Power Steering Fluid is an advanced power steering fluid designed to maximize the life and performance of all power steering units. Max EZ is formulated with a blend of select synthetic base oils plus Royal Purples proprietary Synerlec additive technology, which is proven to make equipment run cooler, smoother, longer, quieter and more efficiently. Max EZ is compatible and can be mixed with conventional power steering fluids and has excellent seal compatibility. Performance Advantages: Greater wear protection Clean, efficient equipment Extended pump life Much longer fluid life Non-foaming Outstanding rust / corrosion protection High temperature service capability
VP Racing Fuels Deluxe Hose 3044 8696 1.00 VP Racing Fuels Deluxe Hose 3044
$ 9.95
The VP Racing Fuels Deluxe Hose 3044 is the perfect add-on to your VP Racing Fuel Container. Avoid the pesky funnel or risks of spilling fuel with this easy to use hose. Requires cap with threaded hose adapter. Features: Fill Up With Ease For VP Racing Fuel Containers
VP Racing Fuels Motorsport Container - Round 8691 5.00 VP Racing Fuels Motorsport Container - Round
5 5 1
$ 30.95
Made in the USA Available in round and square designUses highest quality virgin high-density polyethylene Use 30% more material then other containers for increased durability Ergonomically contoured handle and bottom grip for easy pouring Lanyard included to prevent the loss of vent cap Labels applied in-mold will not crack or peel 15-point quality check Competitively priced <!-- [if gte mso 9]><![endif] --> <!-- [if gte mso 9]>Normal0falsefalsefalseEN-USX-NONEX-NONE<![endif] --> <!-- [if gte mso 9]><![endif] --> <!-- [if gte mso 10]> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} <![endif] --> <!-- [if gte mso 9]><![endif] --> <!-- [if gte mso 9]>Normal0falsefalsefalseEN-USX-NONEX-NONE<![endif] --> <!-- [if gte mso 9]><![endif] --> <!-- [if gte mso 10]> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} <![endif] --> VP Motorsport Containers carry a 3-year limited warranty against cracks, leaks or splitting. Hoses not included. NOTE: The VP Motorsport Container is intended only for use as a rapid refueling device for racing vehicles used in professional off road and closed course competition racing events. It is NOT a portable fuel container as described by ASTM, EPA, ARB or other state or federal agencies. Intended for racing fuel only; not to be used for street legal fuels.
VP Racing Fuels Motorsport Container - Square 8693 5.00 VP Racing Fuels Motorsport Container - Square
$ 30.95
Made in the USA Available in round and square designUses highest quality virgin high-density polyethylene Use 30% more material then other containers for increased durability Ergonomically contoured handle and bottom grip for easy pouring Lanyard included to prevent the loss of vent cap Labels applied in-mold will not crack or peel 15-point quality check Competitively priced VP Motorsport Containers carry a 3-year limited warranty against cracks, leaks or splitting. Hoses not included. NOTE: The VP Motorsport Container is intended only for use as a rapid refueling device for racing vehicles used in professional off road and closed course competition racing events. It is NOT a portable fuel container as described by ASTM, EPA, ARB or other state or federal agencies. Intended for racing fuel only; not to be used for street legal fuels.
XDP - Xtreme Diesel Performance Funnel 34754 1.00 XDP - Xtreme Diesel Performance Funnel
$ 1.5
Whether you're topping off the engine oil in your diesel, or filling your radiator, the XDP - Xtreme Diesel Performance Funnel is the right tool for the job. A useful tool, at a bargain of a price. Buy a few and put one in your truck toolbox, trailer, and shop!Features:For Easy PouringMolded Plastic Construction