Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Airdog 901-01-0351-QC Suction Tube Kit 17831 2.00 Airdog 901-01-0351-QC Suction Tube Kit
$ 43
The PureFlow Airdog 901-01-0351-QC Suction Tube Kit, also known as a "draw-straw" is designed to install in your fuel tank for unrestricted fuel flow. Features: 1/2" Diameter For Increased Flow Fits In Many Applications For Airdog, Raptor Pump and Other Custom Fuel Systems 1/2" Quick Connect Fitting Note: Modification may be required if being used with a custom fuel system.
AirDog A4SPBC084 100GPH Air/Fuel Separation System 10006 27.00 AirDog A4SPBC084 100GPH Air/Fuel Separation System
$ 599
The PureFlow AirDog A4SPBC084 100GPH Air/Fuel Separation System for your 1992-2000 GM 6.5L provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system. Your high performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time! The Airdog works by pulling fuel from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation. Features: 100 GPH @ 8 PSI (Stock-500HP) Removes Air and Water From Fuel Increased Horsepower and Torque Optimized Engine Performance Improved Throttle Response Increased Fuel Economy Lifetime Limited Express Warranty
AirDog A4SPBC087 150GPH Air/Fuel Separation System 10007 27.00 AirDog A4SPBC087 150GPH Air/Fuel Separation System
$ 624
The PureFlow AirDog A4SPBC087 150GPH Air/Fuel Separation System for your 1992-2000 GM 6.5L provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system. Your high performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time! The Airdog works by pulling fuel from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation. Features: 150 GPH @ 8 PSI (Stock-800HP) Removes Air and Water From Fuel Increased Horsepower and Torque Optimized Engine Performance Improved Throttle Response Increased Fuel Economy Lifetime Limited Express Warranty
AirDog II-4G A6SABC108 DF-165-4G Air/Fuel Separation System 30654 27.00 AirDog II-4G A6SABC108 DF-165-4G Air/Fuel Separation System
$ 739
The PureFlow AirDog II-4G A6SABC108 DF-165-4G Air/Fuel Separation System for your 1992-2000 GM 6.5L Diesel is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance, resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDogŪ is proud to announce that the AirDog II-4GŪ is the quietest fuel system in the diesel market! Features: Preset @ 8 PSI Supports 500HP-800HP Flows 165 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration
AirDog II-4G A6SABC111 DF-200-4G Air/Fuel Separation System 30655 27.00 AirDog II-4G A6SABC111 DF-200-4G Air/Fuel Separation System
$ 769
The PureFlow AirDog II-4G A6SABC111 DF-200-4G Air/Fuel Separation System for your 1992-2000 GM 6.5L Diesel is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance, resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDogŪ is proud to announce that the AirDog II-4GŪ is the quietest fuel system in the diesel market! Features: Preset @ 8 PSI Supports 800HP+ Flows 165 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration
AirDog II-4G A6SPBC258 DF-100-4G Air/Fuel Separation System 30662 27.00 AirDog II-4G A6SPBC258 DF-100-4G Air/Fuel Separation System
$ 699
The PureFlow AirDog II-4G A6SPBC258 DF-100-4G Air/Fuel Separation System for your 1992-2000 GM 6.5L Diesel is the next generation in the fuel delivery system, resulting in a long lasting, efficient and quiet lift pump. The compact AirDog II-4G provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel, all while increasing power and performance. The design of the patented AirDog II-4G features many innovative improvements for increased pump performance, less noise and less maintenance. The AirDog II-4G utilizes an intermediate pump shaft that moves the electric motor away from the fuel. This eliminates any potential for wet motors due to a damaged or leaking seal. The motors self-aligning capability requires less maintenance and increases the systems endurance, resulting in a longer pump life. The low amperage motor also provides longer drivability and contributes to a significant reduction in noise. AirDogŪ is proud to announce that the AirDog II-4GŪ is the quietest fuel system in the diesel market! Features: Preset @ 8 PSI Supports Stock - 500HP Flows 100 Gallons Per Hour Improved Throttle Response Smoother Idle and Acceleration
AirDog R4SBC132 Raptor 4G 100GPH Pump 33646 17.00 AirDog R4SBC132 Raptor 4G 100GPH Pump
$ 439
Upgrade the fuel system in your 1992-2000 GM 6.5L Diesel with the PureFlow AirDog R4SBC132 Raptor 4G 100GPH Pump. The Raptor 4G improves fuel flow giving you the ability to support fuel system upgrades and other engine modifications. Using AirDog's 4G technology, this pump features a 4-bearing motor design with an intermediate shaft. This allows for self-alignment of the gerotor resulting in lower amp loads on the motor, while providing you with a quiet, long lasting, dependable fuel pump. Each kit includes plumbing, hardware, and required components for installation. Features: 100 GPH 4G Technology Gerotor Pump Design No Return Line Needed Lifetime Limited Express Warranty Built-In Adjustable Regulator (Preset @ 8 PSI)
AirDog R4SBC135 Raptor 4G 150GPH Pump 33649 17.00 AirDog R4SBC135 Raptor 4G 150GPH Pump
$ 455
Upgrade the fuel system in your 1992-2000 GM 6.5L Diesel with the PureFlow AirDog R4SBC135 Raptor 4G 150GPH Pump. The Raptor 4G improves fuel flow giving you the ability to support fuel system upgrades and other engine modifications. Using AirDog's 4G technology, this pump features a 4-bearing motor design with an intermediate shaft. This allows for self-alignment of the gerotor resulting in lower amp loads on the motor, while providing you with a quiet, long lasting, dependable fuel pump. Each kit includes plumbing, hardware, and required components for installation. Features: 150 GPH 4G Technology Gerotor Pump Design No Return Line Needed Lifetime Limited Express Warranty Built-In Adjustable Regulator (Preset @ 8 PSI)
Alliant AP63485 PMD & Harness Kit 28306 5.00 Alliant AP63485 PMD & Harness Kit
$ 221.76
The Alliant AP63485 PMD and Harness Kit is a direct replacement for your 1994-2002 GM 6.5L Diesel. Alliant Power provides OEM quality, without the OEM price. Keeping Original Equipment Manufacturer (OEM) product as the preferred service part so vehicles and equipment continue to perform like new and provide you with greater satisfaction. 13-month unlimited mileage warranty. Features: PMD and Harness Stock Replacement Replaces OE Part#: 35976
Alliant AP63486 PMD Kit 28307 1.00 Alliant AP63486 PMD Kit
$ 193.01
The Alliant AP63486 PMD is a direct replacement for your 1994-2002 GM 6.5L Diesel. Alliant Power provides OEM quality, without the OEM price. Keeping Original Equipment Manufacturer (OEM) product as the preferred service part so vehicles and equipment continue to perform like new and provide you with greater satisfaction. 13-month unlimited mileage warranty. Features: PMD Stock Replacement Replaces OE Part#: 40736
Alliant Fuel Transfer Pump AP63440 14410 3.00 Alliant Fuel Transfer Pump AP63440
$ 85.61
The Alliant Fuel Transfer Pump AP63440 is a direct replacement for your 1994-1999 GM 6.5L Diesel. Alliant Power provides OEM quality, without the OEM price. Keeping Original Equipment Manufacturer (OEM) product as the preferred service part so vehicles and equipment continue to perform like new and provide you with greater satisfaction. 13-month unlimited mileage warranty. Features: Stock Replacement / Stock Output OE Part#: 25117340, EP309
BD-Power 1036520 Pump Mounted Driver (PMD) Relocation Bracket 1984 2.00 BD-Power 1036520 Pump Mounted Driver (PMD) Relocation Bracket
3 5 1
$ 90
Relocate the Pump Mounted Driver (PMD) on your 1994-2000 GM 6.5L Diesel with the BD-Power 1036520 Pump Mounted Driver Relocation Bracket. The PMD on the side of your injection pump has been known to fail due to excessive heat build-up. The PMD Relocation Kit moves the PMD away from the heat and mounts it on an extruded aluminum base to keep your PMD away from the heat. This bracket mounts on your engine and does not include an extension harness. Features:Relocates PMD Extruded Aluminum Base Provides Better Heat Sinking Allows PMD Access For Easy Repairs Application Notes:This relocation bracket mounts the PMD on the engine. For other mounting out of the underhood or other underhood locations you will need an extension cable (see related items below).
BD-Power 1050347 Flow-Max Fuel Heater Kit 29173 1.00 BD-Power 1050347 Flow-Max Fuel Heater Kit
4 5 1
$ 155
The BD-Power 1050347 Fuel Heater is a must have for those in cold climates. Prevent cold weather gelling of your AirDog fuel system with the BD-Power PTC Heating Element. Designed for quick installation, this heating element gets sandwiched between the water separator and filter head. The self regulating 320 watt heater has over 3x the amount of heating power of other single systems. Each kit includes heating element and wiring harness with sealed electrical connectors for an easy install. Features: Designed For AirDog Fuel Systems Installs Between Filter and Filter Head Self-Regulating 320 Watt Heater Note: This product will fit all AirDog, AirDog 2, and AirDog II-4G Fuel Systems.
BD-Power 40" PMD Extension Cable 1036530 15688 1.00 BD-Power 40" PMD Extension Cable 1036530
$ 68
If your Pump Mounted Driver (PMD) in your Chevy/GMC 6.5L has called it quits like they so often do, then use a BD PMD Extension Cable to easily relocate your PMD! The PMD is an electronic control module that is mounted to the side of the 6.5L Injection Pump. As with most electronics, they begin to fail when the heat in the surround environment becomes too much. The area which the pump/driver is located is very susceptible to this harsh environment. When used in conjunction with the BD PMD Relocation Kit, these cables make relocation a snap. Note: This cable will not fit new style Stanadyne "Grey" PMD manufactured after April 2009. Will fit all D-Tech and Stanadyne "Black" PMD's.
BD-Power 72" PMD Extension Cable 1036531 15689 1.00 BD-Power 72" PMD Extension Cable 1036531
$ 90
If your Pump Mounted Driver (PMD) in your Chevy/GMC 6.5L has called it quits like they so often do, then use a BD PMD Extension Cable to easily relocate your PMD! The PMD is an electronic control module that is mounted to the side of the 6.5L Injection Pump. As with most electronics, they begin to fail when the heat in the surround environment becomes too much. The area which the pump/driver is located is very susceptible to this harsh environment. When used in conjunction with the BD PMD Relocation Kit, these cables make relocation a snap. Note: This cable will not fit new style Stanadyne "Grey" PMD manufactured after April 2009. Will fit all D-Tech and Stanadyne "Black" PMD's.
Bostech DE601 Silver Series Remanufactured Fuel Injector 13182 5.00 Bostech DE601 Silver Series Remanufactured Fuel Injector
$ 39.95
The Bostech DE601 Silver Series Remanufactured Fuel Injector for your 1992-2000 GM 6.5L Turbo Diesel are a direct replacement for your worn factory injectors. Mechanical Injectors open and close at predetermined pressures. Fuel is distributed in a near continuous spray that is injected into the cylinder. Although this technology has been around for a while, and doesn't seem to give near as many problems as the more efficient and modern common rail injector, they still wear over time and do fail. Each injector is remanufactured to Bostech's stringent quality control. Sold individually. Features: Remanufactured Sold Individually Stock Replacement 13 Month Unlimited Mileage Warranty Replaces OE Part# 10233973, 0 432 217 276
Bostech DE611 Silver Series Remanufactured Fuel Injector 27870 2.00 Bostech DE611 Silver Series Remanufactured Fuel Injector
$ 39.95
The Bostech DE611 Silver Series Remanufactured Fuel Injector for your 1992-1995 GM 6.2L/6.5L Diesel are a direct replacement for your worn factory injectors. Mechanical Injectors open and close at predetermined pressures. Fuel is distributed in a near continuous spray that is injected into the cylinder. Although this technology has been around for a while, and doesn't seem to give near as many problems as the more efficient and modern common rail injector, they still wear over time and do fail. Each injector is remanufactured to Bostech's stringent quality control. Sold individually. Features: Remanufactured Sold Individually Stock Replacement 13 Month Unlimited Mileage Warranty Replaces OE Part# 10233972, 0 432 217 275
Bostech DE621 Silver Series Remanufactured Fuel Injector 13176 2.00 Bostech DE621 Silver Series Remanufactured Fuel Injector
$ 39.95
The Bostech DE621 Silver Series Remanufactured Fuel Injector for your 1987-1991 GM 6.2L Diesel are a direct replacement for your worn factory injectors. Mechanical Injectors open and close at predetermined pressures. Fuel is distributed in a near continuous spray that is injected into the cylinder. Although this technology has been around for a while, and doesn't seem to give near as many problems as the more efficient and modern common rail injector, they still wear over time and do fail. Each injector is remanufactured to Bostech's stringent quality control. Sold individually. Features: Remanufactured Sold Individually Stock Replacement 13 Month Unlimited Mileage Warranty Replaces OE Part# 14063606
Bostech DE631 Silver Series Remanufactured Fuel Injector 27869 2.00 Bostech DE631 Silver Series Remanufactured Fuel Injector
$ 39.95
The Bostech DE631 Silver Series Remanufactured Fuel Injector for your 1983-1988 GM 6.2L Diesel are a direct replacement for your worn factory injectors. Mechanical Injectors open and close at predetermined pressures. Fuel is distributed in a near continuous spray that is injected into the cylinder. Although this technology has been around for a while, and doesn't seem to give near as many problems as the more efficient and modern common rail injector, they still wear over time and do fail. Each injector is remanufactured to Bostech's stringent quality control. Sold individually. Features: Remanufactured Sold Individually Stock Replacement 13 Month Unlimited Mileage Warranty Replaces OE Part# 14059057