Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Alliant Water Pump AP63562 14431 4.30 Alliant Water Pump AP63562
$ 137.69
OEM Part #: 97216136, 19113733, 251-674, 252-723, 252-383 Note: Includes mounting gaskets
Bostech WP01100 Water Pump 30459 8.00 Bostech WP01100 Water Pump
$ 79.95
The Bostech WP01100 Water Pump for your 2001-2005 GM 6.6L Duramax is built from top quality materials and is produced under strict quality control guidelines. This pump is built to meet or exceed OE standards and is a bolt-on replacement. Features: High Quality Construction Replaces OE Part#: 97216136 13 Month Unlimited Mileage Warranty Bostech Old Part#: WP100
CSF 10551 A/C Condenser 34836 8.80 CSF 10551 A/C Condenser
$ 54.29
The CSF 10551 A/C Condenser is a direct replacement for the failed or damaged condenser in your 2001-2014 GM 6.6L Duramax. CSF Condensers are manufactured to match the OE specifications and OE materials used in your factory unit. CSF Factories are ISO and TSO certified to ensure high quality components. The 10551 matches the OE measurements to fit in your factory mounting points and re-installs with OE plumbing. Features:Direct-Fit ReplacementUses Factory Mounting PointsManufactured In ISO/TSO Cerified FactoriesSpecifications:Construction: Parallel FlowCore Length (in): 29 Core Thickness (In): 5/7Core Width (in): 17 Hazardous Material: NoInlet Tube: Block FittingOutlet Tube: Block FittingApplications: 2001-2014 GM 6.6L Duramax 2500HD/3500HD (Without Ambulance Package)Cross Reference #: APDI 7014953, DPI 4953, GM 25967385, SPI 7-4953
Dorman 603-125 Coolant Reservoir 29255 5.00 Dorman 603-125 Coolant Reservoir
$ 78.95
Replace the old cracked Coolant Reservoir on your 2001-2007 GM 6.6L Duramax with the Dorman 603-125 Coolant Reservoir. Dormans Engine Coolant Recovery Tank is designed for enduring use. It resists the expansion and cracking that extreme temperature fluctuations can cause. Plus, the durable plastic construction prevents coolant fluid loss. Features: Direct Replacement Includes Reservoir Cap Quality Tested For Trouble-Free Performance Cross Reference Numbers: AC Delco Part#: RC98 GM OE Part#: 15085725, 15808714 Non-Direct Cross GM Part#: 15075118
Dorman 800-409 Heater Hose Connector 29175 1.00 Dorman 800-409 Heater Hose Connector
$ 7.34
The Dorman 800-409 Heater Hose Connector allows you replace the damaged factory connection on your 2001-2013 GM 6.6L Duramax. Dormans HVAC Heater Hose Connector resists brittleness, cracking, and leaking. The hose is designed to weather extreme temperatures from the engines coolant. This easy to install fitting features a durable plastic construction and does not require replacement of the entire hose assembly. Features: Material: Plastic Fitting Angle: Straight Fitting Attachment End 1: 0.75" Quick Disconnect Fitting Attachment End 2: 5/8" Hose Barb GM OE Numbers: 15032062, 15151875 Note: Will not work on models with ambulance package.
Dorman 82597 Coolant Reservoir Cap 29212 1.00 Dorman 82597 Coolant Reservoir Cap
$ 8.81
The Dorman 82597 Coolant Reservoir Cap is a direct replacement for your 2001-2007 GM 6.6L Duramax. Dorman Engine Coolant Recovery Tank Caps are constructed of high-quality plastic. They protect the cooling system by providing a tight seal against the elements. Features: Direct Replacement Replacement Cap - No Need To Replace Entire Tank Cross Reference Numbers: ACDelco Part#: RC98 GM OE Part#: 15075118
Dorman 902-901 Coolant Bypass Pipe 29349 1.00 Dorman 902-901 Coolant Bypass Pipe
1 5 1
$ 26.95
The Dorman 902-901 Coolant Bypass Pipe for your 2001-2005 GM 6.6L Duramax is re-engineered to address the common failure points in the OE product. The Dorman Thermostat Bypass Pipe has improved durability and has been coated to resist corrosion. Maintain the steady flow of coolant and lessen the chances of overheating. Features: Direct Replacement High Quality Construction Replaces OE GM Part#: 97371074
Flex-a-lite 284 Direct-Fit Dual Electric Cooling Fans 1810 21.00 Flex-a-lite 284 Direct-Fit Dual Electric Cooling Fans
3.5 5 6
$ 509.99
The Flex-a-lite 284 Direct-Fit Dual Electric Cooling Fans for your 2001-2005 GM 6.6L Duramax provides you with a high performance bolt-on cooling upgrade for your Duramax powered pickup. By replacing your stock clutch fan assembly with this dual electric fan system, you can increase your fuel economy by up to 6% and recover up to 27 HP! These cooling fans feature two 15-inch S-Blade electric fans and a Flex-a-lite Variable Speed Controller that varies the fan speed from 60-100 percent, depending on radiator temperature. These powerful fans move up to 6,000 cfm of airflow! Also see the related products below for the Flex-a-lite 31143 Illuminated 3-Way Switch (sold separately) that gives you the option to override the fan controller by turn the fans off, or on at 100%. Features: Direct-Fit, Bolt-On Design Up To 6,000 CFM Of Airflow Quicker Engine Warm-Up Variable Speed Controller with A/C Relay Meets Recommended Factory GCVW Ratings 1-Year Warranty Product Specifications: Height: 17" Width: 31-7/8" Depth: 4-1/2" Air Flow: 6,000 CFM Fan Diameter: Dual 15" Number Of Blades: 8 Amperage Draw: 36 Fuse Rating (amp): 50 Amp Circuit Breaker Additional InformationInstall Sheet
GM 97241129 Front Thermostat 28384 2.00 GM 97241129 Front Thermostat
$ 49.56
The GM 97241129 Front Thermostat is a factory replacement for your 2001-2018 GM 6.6L Duramax. This Thermostat features the same OE activation temp and is a drop-in replacement for the Front Thermostat equipped from the factory. Features: Front Thermostat 185 Degree (OE Temp) AC Delco Part#: 131-163
GM 97241130 Rear Thermostat 28385 1.00 GM 97241130 Rear Thermostat
$ 43.33
The GM 97241130 Rear Thermostat is a factory replacement for your 2001-2018 GM 6.6L Duramax. This Thermostat features the same OE activation temp and is a drop-in replacement for the Rear Thermostat equipped from the factory. Features: Rear Thermostat 180 Degree (OE Temp) AC Delco Part#: 131-131
HSP Factory Replacement Coolant Tank 39939 12.00 HSP Factory Replacement Coolant Tank
$ 325
Replace the unsightly, yellowed, and brittle plastic factory coolant reservoir in your 2001-2007 GM 6.6L Duramax with this sleek custom aluminum HSP Factory Replacement Coolant Tank. HSP CNC cuts and bends each tank for an excellent fit in the stock location. A factory low coolant sensor, fittings, and hardware are included to connect to the original cooling system for a worry-free installation. The aluminum construction will outlast any plastic tank and is available in multiple powder coat color options to match anyone's style. Features:Direct Fit Factory ReplacementFactory Low Coolant SensorIncludes Installation HardwareBuilt To Last Aluminum Construction
HSP LB7/LLY Billet Thermostat Housing Kit 39950 11.00 HSP LB7/LLY Billet Thermostat Housing Kit
$ 335
The HSP LB7/LLY Billet Thermostat Housing Kit removes the obstructive factory coolant hose routing on your 2001-2005 GM 6.6L Duramax. A CNC billet aluminum upper thermostat housing makes extra room for larger aftermarket turbos in the valley as well as dual cp3 setups by eliminating the factory coolant hose that crosses over the driver side valve cover. HSP utilizes reinforced silicone boots and a hard tube for added strength versus the factory rubber hose. This kit does not have provisions to return coolant from the turbocharger. Features:Reinforced Silicone BootsIncludes Installation HardwareCNC Billet Aluminum Upper Thermostat HousingAllows Room For Dual CP3 Kits And Larger TurbosImproved Design Allows Easier Access To Driver Valve CoverNote: For use with aftermarket turbos in the valley. No cooling provisions.
HSP LB7/LLY Billet Thermostat Housing Kit With Coolant Return 39951 11.00 HSP LB7/LLY Billet Thermostat Housing Kit With Coolant Return
$ 365
Eliminate the obstructive factory coolant hose routing on your 2001-2005 GM 6.6L Duramax with the HSP LB7/LLY Billet Thermostat Housing Kit With Coolant Return. With a CNC billet aluminum construction, this upper housing thermostat kit makes extra room for larger drop-in turbos in the valley as well as dual cp3 setups by eliminating the factory coolant hose that crosses over the driver side valve cover. HSP utilizes reinforced silicone boots and a hard tube for added strength versus the factory rubber hose. This kit features provisions to return coolant from the turbocharger. Features:Reinforced Silicone BootsIncludes Installation HardwareAllows Room For Dual CP3 KitsCNC Billet Aluminum Upper Thermostat HousingImproved Design Allows Easier Access To Driver Valve CoverNote: For use with stock or drop-in replacement VGT turbos.
Merchant Automotive 10089 Billet Coolant Block-Off Plate 33127 1.00 Merchant Automotive 10089 Billet Coolant Block-Off Plate
$ 65
The Merchant Automotive 10089 Billet Coolant Block-Off Plate eliminates the common leaking issue in your 2001-2017 GM 6.6L Duramax. The factory coolant block-off plate has a cast design with a gasket. Over time, this plate commonly begins to leak. Merchant Automotive has designed this billet block-off plate with a built-in o-ring seal for a leak-free installation. Features: Billet Construction Replaces Factory Block-Off Plate Installs Using Factory Bolts and Hardware
Merchant Automotive 10540 Water Pump 34122 5.00 Merchant Automotive 10540 Water Pump
$ 189.05
Upgrade the water pump in your 2001-2005 GM 6.6L Duramax LB7 and LLY with the Merchant Automotive 10540 Water Pump. Merchant Automotive modifies the factory pump by TIG welding the impeller and drive gear to the shaft for increased durability. This avoids any issues associated with gear slippage and impeller walk. Each water pump includes gaskets and o-rings for installation.Features:Welded Impeller and Drive GearIncreased Reliability
Merchant Automotive 10541 Water Pump Kit With Cover 34123 10.00 Merchant Automotive 10541 Water Pump Kit With Cover
$ 273.55
Upgrade the water pump in your 2001-2005 GM 6.6L Duramax LB7 and LLY with the Merchant Automotive 10541 Water Pump Kit With Cover. Merchant Automotive modifies the factory pump by TIG welding the impeller and drive gear to the shaft for increased durability. This avoids any issues associated with gear slippage and impeller walk. Each water pump includes gaskets and o-rings for installation. FeaturesWelded Impeller and Drive GearIncreased Reliability
Mishimoto High Temperature Thermostats MMTS-CHV-01DH 12975 5.00 Mishimoto High Temperature Thermostats MMTS-CHV-01DH
$ 72.95
The Mishimoto Chevrolet Duramax high temperature thermostats activate at a higher temperature than the OEM thermostats, making them the perfect solution for Duramax owners who live in colder climates, or have trouble reaching operating temperatures. Activating at a higher temperature means the thermostats will allow the coolant to stay in the engine longer delaying the coolant flowing through the radiator, which allows the engine to warm up sooner. Features: Faster warm-up time Great for those in cold climates Includes: 1 - 185 F Thermostat 1 - 191 F Thermostat Limited Lifetime Warranty
Mishimoto Low Temperature Thermostats MMTS-CHV-01DL 12976 5.00 Mishimoto Low Temperature Thermostats MMTS-CHV-01DL
3 5 2
$ 74.95
The Mishimoto Chevrolet Duramax low temperature thermostats activate at a lower temperature than the OEM thermostats, making them the perfect solution for Duramax owners who live in warmer climates, or use their trucks under heavy load or strenuous driving conditions. Activating at a lower temperature means coolant will begin flowing through the system and allow for cooler temperatures. Features: Great for those in warmer climates Keeps truck cooler under heavy loads Includes: 1 - 174 F Thermostat 1 - 180 F Thermostat Limited Lifetime Warranty
Mishimoto MMRAD-DMAX-01 Aluminum Performance Radiator 17803 15.00 Mishimoto MMRAD-DMAX-01 Aluminum Performance Radiator
3 5 2
$ 773.95
Mishimoto has released a performance aluminum radiator for the 2001-2005 Chevrolet/GMC 6.6L Duramax. Mishimoto performance radiators are manufactured from high-quality aircraft-grade aluminum with a 100% aluminum core and polished end tanks. The Mishimoto 6.6L Duramax performance radiator offers increased cooling efficiency, and the all-aluminum TIG-welded construction provides a rugged design that can take the abuse of any environment or terrain. Pair your Mishimoto 6.6L Duramax aluminum radiator with our silicone coolant hose kit for the ultimate in cooling performance and reliability. As with all our products, this radiator is protected by the Mishimoto lifetime warranty. Features: Direct OEM Replacement No Cutting or Modification Required Technical Specifications: Overall Size: 45.6 x 20.8 x 5.4 Core Size: 34.06" x 19.61" Rows: 2 Inlet: 1.89 Outlet: 1.89 Core Thickness: 2.20" Tank Wall Thickness: .08 Drain Plug Thread Size: M12 x 1.5 Kit Includes: Mishimoto Radiator Magnetic Drain Plug Limited Lifetime Warranty LIFETIME WARRANTY Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer. A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product. The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
Mishimoto Silicone Hose Kit MMHOSE-CHV-01D 13006 6.00 Mishimoto Silicone Hose Kit MMHOSE-CHV-01D
$ 280.95
Mishimoto silicone radiator hoses designed for the 2001-2005 Chevrolet 6.6L Duramax 2500 are designed as a direct replacement for your OEM rubber hoses. Our silicone hoses are crafted using a combination of high-grade silicone and heat-resistant embedded fibers that provide extreme durability, markedly better heat reduction and increased pressure tolerance. Upgrade your cooling system in style with a choice of black, blue or red Mishimoto silicone hoses. Features: Interior Material: Heat-Resistant Embedded Fibers Exterior Material: Silicone Max Temperature: 330 F Inner Diameter Hose 1: 1.65", 2.05", 0.95", 0.55" Hose 2: 1.70" Outer Diameter Hose 1: 2.05", 2.45", 1.35", 0.95" Hose 2: 2.10" Includes: 2 Silicone Hoses LIFETIME WARRANTY Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer. A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product. The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.