The AFE 46-70010 Street Series Differential Cover brings performance engineering and protection to your rear differential. Constructed from die-cast A380 aluminum, this rear diff cover will fit the AA14-11.5 rear axle found in 2003-2013 Dodge Ram 2500, 2003-2018 Dodge Ram 3500, and 2001-2018 GM 2500HD/3500HD. This cover comes with all necessary hardware and includes an O-ring for a leak-free seal. This cover increases your lube capacity to 5 quarts! That adds an extra quart over the factory fill with your stock cover. The built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. Maintenance and inspection will now be a breeze with the pre-installed oil level sight glass as well as the magnetic drain and fill plug for easy fluid changes. This cover works great combined with a oil level sight glass 46-90001 or deep reach fill plug with a 6" long magnetic tipped dip stick 46-9000 (sold separately)
Magnetic Drain Plug
Built-In Calibration Plug
5-Quart Lube Capacity
Fitment Note: Fits Ram trucks with rear leaf springs only. AFE 46-70012 Pro Series Differential Cover605016.00
The AFE 46-70012 Pro Series Differential Cover brings performance engineering and protection to the rear of your Dodge Ram and GM Duramax Axle . The Pro Series differential cover is constructed out of durable die-cast A380 aluminum with reinforced ribs for maximum strength and styling. Including all necessary hardware with a built-in O-ring this cover makes maintenance a breeze. The Pro Series differential covers include an oil level sight glass as well as a magnetic dip-stick for maximum protection.
This cover increases your lube capacity to 5 quarts! That adds an extra quart over the factory fill with your stock cover. The built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. Maintenance and inspection will now be a breeze with the pre-installed oil level sight glass as well as the magnetic drain and fill plug for easy fluid changes.
Increased Oil Capacity
Magnetic Drain Plug
Magnetic Fill Plug
Oil Level Sight Glass
5-Quart Lube Capacity
2001-2018 GM 6.6L Duramax
2003-2012 Dodge 5.9L/6.7L Cummins
2013-2018 RAM 6.7L Cummins (Leaf spring only, not for coil spring suspension)ATS 4029156248 Protector Rear Differential Cover889714.00
The ATS 4029156248 Protector Rear Differential Cover for your 2001-2018 GM 2500HD/3500HD and 2003-2018 Dodge Ram 2500/3500 fits on the 14 Bolt - 11.5" American Axle rear axle on your truck. Built from durable aluminum, this rear differential cover allows for larger oil capacity for optimal gear lubrication and cooling. Features:Optimal Gear LubricationBlack Powdercoated FinishDrain Plug For Easy Fluid ServiceBuilt-In Heat Sink For Better Cooling2.5 Quart Increased Capacity Over StockNote: This product will only fit on 2013+ Dodge Cummins models with a rear leaf spring suspension. Due to clearance issues, this cover will not fit on rear coil sprung applications. BD-Power 1030710 2Low UnLoc323011.00
The BD-Power 1030710 2Low UnLoc provides your 2001-2014 GM 2500HD/3500HD with the option of low range in 2WD! The 2Low Unloc is designed to allow the operator to manually disable the front wheel drive mechanism by holding the hubs in the free (2WD) mode with the transfer case in 4WD low range. By allowing the front wheels to be disengaged, maximum torque is available to the rear wheels. This will also allow for sharp All The Way Over turns without the front axle u - joint hopping or binding.
With this kit installed, the front wheels will NOT be driven through the transfer case. This allows the operator to have full power and torque while in a high gear reduction applied to the rear axle only.
Enables Low Range 2WD
Applies Maximum Torque To Rear Axle Only
2001-2014 GM 2500HD/3500HD 4WD
2001-2013 GM 1500 4WD CST CV Style Driveshaft CSP-C28-13031170.00
The CST CV Style Driveshaft CSP-C28-1 for your 2001-2015 GM 2500HD/3500HD is designed specifically for use with CST 6"-8" and 8"-10" Lift Kits (set at 8").
For 6.6L Duramax With Allison Trans
Works With CST 6"-8" Lift and 8"-10" Lift (set at 8")
Recommended For Use In 4WD At Highway Speeds
CSS-C22-8 Bracket Required for 2011+ (see related items below).
CSS-C22-7 Bracket required for 2007.5-2010 models (see related items below)
2001-2010 25000HD/3500HD 4WD (With CST 6"-8" and 9"-11") Fits 6.6L or 8.1L engines.
2011-2015 2500HD/3500HD 4WD (With CST 6"-8" and 8"-10" Set at 8") Fits 6.6L or 8.1L engines. Dorman 697-501 Differential Yoke2929016.00
The Dorman 697-501 Differential Yoke is a direct replacement for your 2001-2007 GM Silverado/Sierra 3500HD. Dormans Driveshaft Pinion Yoke includes a high-quality seal constructed from a combination of rubber, metal and plastic. The seal prevents lubricant from leaking and protects your vehicle against costly repairs.
Engineered For Long-Lasting Durability
Direct Replacement For Proper Fit
Replaces GM OE Part#: 12471501
Application Note: Fits 11.5" ring gear with 30mm u-joint bearing cap. Fleece FPE-TUFSHAFTS TufShafts Axle Upgrade2368818.00
The Fleece FPE-TUFSHAFTS TufShafts Axle Upgrade is designed for your 2001-2010 GM 2500HD/3500HD with a 9.25 AAM front axle. They are designed to eliminate the stock passenger side split axle shaft that is prone to breaking under high torque situations, as well as the short drive side axle shaft that is prone to breaking under high torque situations as well. The TufShafts are made from high strength HyTuf material for maximum strength and reliability. Features: Durable, HyTuf Construction Eliminates Stock Pass. Side Split Shaft Note: The TufShaft does not incorporate an axle disconnect, so the front driveshaft will spin when the vehicle is in motion, but with the front differential unlocked the truck will turn and drive like normal. GM 12471499 Pinion Yoke For 1480 Series U-Joint2842815.30
The GM 12471499 Pinion Yoke is a direct replacement for old worn or damaged yoke. Fits on GM trucks with AAM 11.5" axle with 1480 series u-joints.
For AAM 11.5" Axle w/ 1480 U-Joints
Note: For proper application, you must to confirm you have the 1480 series u-joints. GM 12471501 Pinion Yoke For 1410 Series U-Joint2842715.10
The GM 12471501 Pinion Yoke is a direct replacement for old worn or damaged yoke. Fits on GM trucks with AAM 11.5" axle with 1410 series u-joints.
For AAM 11.5" Axle w/ 1410 U-Joints
Note: For proper application you must measure to confirm you have the 1410 series u-joints. The 1410 Series U-Joints are 4.188" wide with a 1.188" cap. USA Standard ZDS9308 Front Driveshaft Assembly4379618.00