Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AFE 46-20045 BladeRunner Intercooler Pipe Kit 27535 13.00 AFE 46-20045 BladeRunner Intercooler Pipe Kit
$ 389.5
The AFE 46-20045 BladeRunner Intercooler Pipe Kit for your 2001-2004 GM 6.6L Duramax LB7 is a direct swap for the both the hot and cold intercooler pipes currently on your truck. Built from 3" mandrel bent steel, these intercooler pipes provide maximum durability and flow while enhancing looks as well as performance. Flow and Performance: These intercooler tubes are constructed of 3" mandrel bent tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth bends allow for low turbulence while increasing horsepower and torque with lower EGTs. Installation is a snap: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes a heavy-duty 5-PLY coupling for strength. aFe Badging: Unique laser-cut aFe Power logo plates are welded-on for an aggressive style. Features: Outflows stock intercooler tubes by up to 14% Replacement tubes for both hot and cold side of the intercooler Constructed out of 3" mandrel-bent tubing Powder-coated wrinkle-black for heat resistance and long-life Includes high-temp coupling and high quality stainless steel spring loaded T-bolt clamp Coupling is constructed out of heavy-duty high-temp 5-PLY polyester for heat-resistance and durability
AFE 46-20046 BladeRunner Hot Side Intercooler Pipe 27534 8.00 AFE 46-20046 BladeRunner Hot Side Intercooler Pipe
$ 229.9
The AFE 46-20046 BladeRunner Hot Side Intercooler Pipe for your 2001-2004 GM 6.6L Duramax LB7 is built from 3" mandrel-bent tubing and outflows your stock intercooler pipe by up to 14%! Designed for an easy installation, this Intercooler Pipe replaces your factory pipe for increased flow and performance. Flow and Performance: This intercooler tube is constructed of 3" mandrel bent tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The smooth bends allow for low turbulence while increasing horsepower and torque with lower EGTs. Installation is a snap: Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes a heavy-duty 5-PLY coupling for strength. aFe Badging: A unique laser-cut aFe Power logo plate is welded-on for an aggressive style. Features: Outflows stock intercooler tube by up to 14% Replacement tube for hot side of the intercooler Constructed out of 3" mandrel-bent tubing Powder-coated wrinkle-black for heat resistance and long-life Includes high-temp coupling and high quality stainless steel spring loaded T-bolt clamp Coupling constructed out of heavy-duty high-temp 5-PLY polyester for heat-resistance and durability
AFE 46-20047 BladeRunner Cold Side Intercooler Pipe 15946 7.00 AFE 46-20047 BladeRunner Cold Side Intercooler Pipe
$ 190
The AFE 46-20047 BladeRunner Intercooler Tube for your 2001-2004 GM 6.6L Duramax LB7 is a direct swap for the stock passenger side intercooler tube currently on your truck. Built with 3" mandrel bent stainless steel, this tube provides maximum durability and flow while enhancing looks as well as performance. Perfect Fit: Tube lines up directly to factory couplings for a convenient, tight and secure installation with minimal parts. Flow and Performance: The intercooler tube is constructed of 3" mandrel bent powder-coated stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Installation is a snap: Utilizing the factory mounting locations provides stability and a hassle-free installation. aFe Badging: Unique stainless steel laser-cut aFe Power logo plate is welded-on for an aggressive style. Features: 3" Mandrel Bent Construction Fits On Passenger Side All Hardware Included Hassle-Free Installation
HSP Hot Side Intercooler Pipe 28210 15.00 HSP Hot Side Intercooler Pipe
3.286 5 7
$ 195
Eliminate the weak factory lower intercooler boot design on your 2001-2010 GM 6.6L Duramax with the HSP Hot Side Intercooler Pipe. HSP's design allows for a straight connection to the intercooler which eliminates any issues with the silicone boot. The 3" mandrel bent tubing features smooth, sweeping bends which makes for a great fitment and even increases flow by up to 40% over the stock! Includes upgraded high strength silicone boots.Features:3" Mandrel Bent TubingEliminates Boot FailuresIncrease Flow And PerformanceCrisper Engine And Turbo ToneCustom Powder Coating Options Available
HSP LB7 Factory Style Cold Side Intercooler Pipe 28218 11.00 HSP LB7 Factory Style Cold Side Intercooler Pipe
$ 149
Replace the restrictive factory cold side intercooler pipe on your 2001-2004 GM 6.6L Duramax LB7 with the HSP LB7 Factory Style Cold Side Intercooler Pipe. HSP uses a 3" diameter mandrel bent pipe which showed major power gains over the factory small diameter pipe when dyno testing. Features:3" Mandrel Bent PipeIncludes T-Bolt ClampsIncreased Performance and Spool UpHigh Strength Silicone Boot
MBRP Aluminum Intercooler Pipe 3" Passenger Side IC1517 11550 10.00 MBRP Aluminum Intercooler Pipe 3" Passenger Side IC1517
$ 166.49
Show Quality Polished 6061 Aluminum Increased Performance Faster Turbo Spool and Lower EGTs Mandrel Bent 3 Tubing for Improved Flow Tapper with (2) 1/8 NPT Ports with Plugs Prevents Leaks and Blown Boots with Heavy Duty Couplings and Spring Loaded Constant-Tension Clamps
Mishimoto MMICP-DMAX-02BK Intercooler Pipe & Boot Kit 17799 5.00 Mishimoto MMICP-DMAX-02BK Intercooler Pipe & Boot Kit
$ 369.95
The Mishimoto 6.6L Duramax intercooler pipe and boot kit is an ideal upgrade in reliability and performance. The Mishimoto kit features polished aluminum cold-side and hot-side piping accompanied by silicone boots with DuraCore technology. Mishimoto 6.6L Duramax intercooler piping is engineered to eliminate restrictive bends present in the factory pipes. This results in improved airflow, more power, and lower EGTs that will support your Duramax at any power level. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. Upgrade to the Mishimoto 6.6L intercooler pipe and boot kit and give your Duramax the efficient, unimpeded airflow it needs to make more power. To further improve your charge-air system, pair this pipe kit with the Mishimoto 6.6L performance intercooler. This kit is made in the USA and includes the Mishimoto signature lifetime warranty. Features: 3.0" Polished Aluminum Intercooler Pipes Direct-Fit Replacement Constant Tension T-Bolt Clamps: (2) 2.75 Constant Tension T-Bolt Clamps (6) 3.25 Constant Tension T-Bolt Clamps Silicone Boots with DuraCore Boot 1: 2.30, 3.00 Boot 2: 2.30, 3.00 Boot 3: 3.00 Boot 4: 3.00 LIFETIME WARRANTY Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer. A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product. The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.