Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Cognito 110-90227 Front Limiting Strap Kit For 2-3" Lift 80365 5.00 Cognito 110-90227 Front Limiting Strap Kit For 2-3" Lift
$ 133
The Cognito 110-90227 Front Limiting Strap Kit For 2-3" Lift will help save the ball joints from premature wear in your 2001-2013 GM Truck or SUV. The stock shock on your truck normally acts as the droop limiter but most dual shock hoop systems do not use the stock shock location. This limiting strap kit features adjustable straps and is designed to limit the droop travel and goes in the location of the front shock when it has been relocated. Without a limiting strap, the ball joint on the upper control arm acts as the droop limiter causing premature wear on the upper ball joint. This kit includes everything needed for installation and includes a limited lifetime warrantyFeatures:For 2-3” Lift KitsExtends Ball Joint LifeLimited Lifetime WarrantyApplication Notes:2001-2013 GM 2500 2WD/4WD SUVs2003-2009 GM Hummer H2 and H2 SUT2001-2010 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD
Cognito 110-90228 Limiting Strap Kit For 10-12" Lift 80369 5.00 Cognito 110-90228 Limiting Strap Kit For 10-12" Lift
$ 133
The Cognito 110-90228 Limiting Strap Kit For 10-12" Lift will minimize the potential of damaging the upper ball joints in your 2001-2013 GM Truck or SUV. The front shocks on your vehicle act as a droop limiter on your stock suspension but dual front shock hoops usually do not use the stock location and consequently do not limit the suspension. This limiting strap kit can reduce the damage to your upper ball joints by reducing the droop travel on your lifted truck and the adjustable straps allow you to adjust the droop to your lift. This kit includes straps, bolts, and hardware needed for installation and includes a limited lifetime warranty. Features:For 10-12” Lift KitsExtends Ball Joint LifeLimited Lifetime WarrantyApplication Notes:2001-2013 GM 2500 2WD/4WD SUVs2003-2009 GM Hummer H2 and H2 SUT2001-2010 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD
Cognito 110-90230 Front Limiting Strap Kit For 4-6" Lift 80366 5.00 Cognito 110-90230 Front Limiting Strap Kit For 4-6" Lift
$ 133
Reduce the potential damage to the ball joints in your 2001-2013 GM Truck or SUV with the Cognito 110-90230 Front Limiting Strap Kit For 4-6" Lifts. Almost all dual shock hoop set ups do not use the stock front shock location and so do not act as a limiter on suspension droop. This limiting strap kit goes in place of where the front shock would be and allows you to set the droop travel with the adjustable straps. The ball joint on the upper control can be damaged without a limiting strap as the upper ball joint acts as the droop limiter when there is nothing to limit the travel of the suspension. This kit includes a limited lifetime warranty, and everything needed for installation.Features:For 4-6” Lift KitsExtends Ball Joint LifeLimited Lifetime WarrantyApplication Notes: Non Torsion Bar Drop Cognito Kits ONLY 2001-2013 GM 2500 2WD / 4WD SUVs2001-2010 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD
Cognito 110-90231 Limiting Strap Kit For 6" Subframe Lift 80367 5.00 Cognito 110-90231 Limiting Strap Kit For 6" Subframe Lift
$ 133
Lessen the chance of damage front end components on your 2001-2013 GM Truck or SUV with the Cognito 110-90231 Limiting Strap Kit For 6" Subframe Lift. The stock front shock on your vehicle acts as a droop limiter but most dual shock hoops do not use the stock location and the ball joint on the upper control arm can be damaged without limiting the suspension travel. This limiting strap kit will limit the droop travel and includes adjustable straps that will allow to set the droop limit to your desired location. This kit includes all the hardware needed for installation and comes with a lifetime warranty. Features:For 6” Lift KitsExtends Ball Joint LifeLimited Lifetime WarrantyApplication Notes:2001-2013 GM 2500 2WD/4WD SUVs2001-2010 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD
Cognito 110-90232 Limiting Strap Kit For 7-9" Lift 80368 5.00 Cognito 110-90232 Limiting Strap Kit For 7-9" Lift
$ 133
The Cognito 110-90232 Limiting Strap Kit For 7-9" Lift will limit the suspension travel on your 2001-2013 GM Truck or SUV and reduce potential damage to your ball joints. The ball joint on the upper control arm can be damaged without limiting the suspension travel as the front shocks do in a stock truck. Dual front shock hoops generally do not use the stock shock location and therefore do not limit the suspension. This limiting strap set includes adjustable straps that will liming the amount of droop that is possible on the front suspension, thereby reduce the potential damage to the upper ball joints. This kit contains everything needed for installation and includes a limited lifetime warranty. Features:For 7-9” Lift KitsExtends Ball Joint LifeLimited Lifetime WarrantyApplication Notes:2001-2013 GM 2500 2WD/4WD SUVs2001-2010 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD
CST 6"-8" Stage 1 Lift Kit CSK-C3-6-1 30409 350.00 CST 6"-8" Stage 1 Lift Kit CSK-C3-6-1
$ 2290
The CST 6"-8" Stage 1 Lift Kit CSK-C3-6-1 is the perfect way to add some height to your 2001-2010 GM 2500HD 2WD/4WD Pickup. This kit is designed around the unique CST one-piece sub-frame design. CST also adds strut bar supports, and reinforced upper control arm drop mounts, and a steering drop down with heim jointed support links. The CST System will drop down the factory suspension a true six inches, ensuring that factory steering and 4-wheel drive cv angles will remain within factory specs. This kit does not increase the track width and with the use of CST Shocks over all ride quality will be improved. 2009 and up models are not equipped with the GM Stabilitrak System, installation of this kit will not affect it in any way. Suggested Wheel and Tire Sizes: - 35 Tires on 9-10 wide wheels w/ 4 to 5 inches of back-spacing. (minor trimming required on 10" wide wheels) - 37 Tires on 8-9 wide wheels w/ 4 to 5 inches of back-spacing and suspension set at 8 of lift w/ minor trimming. Anything larger, taller or wider is up to your installer! Features: Improved Ride and Handling Minimal CV Angle Changes Maintains O.E. Track Width No Cutting Or Welding Required For Installation Notes - Please Read For Additional Required Components: 5" maximum backspacing. Shock absorbers not included. CST Front drive-shaft required for 4wd use at highway speeds. Carrier bearing spacer required on trucks with 2 piece driveshaft. Additional rear lift required for level stance on some trucks when suspension is set at 8". 3500HD Owners: This kit was designed and tested for the 2500HD trucks. It can be used on 3500HD and 3500HD Dually if the purchaser / installer is able to provide custom u-bolts for their application. Due to the many different spring and axle configurations, u-bolts are not included or offered for the 3500HD models. Neither XDP or CST offer u-bolts for these applications. You must be able to source them locally. Custom carrier bearing spacer may be required as well. Truck Freight Item: Allow 1-2 Weeks for delivery. Truck freight charges apply.
CST 9" Lift Kit With Shocks CSK-C3-9-1 30372 350.00 CST 9" Lift Kit With Shocks CSK-C3-9-1
$ 3472.83
The CST 9" Lift Kit With Shocks CSK-C3-9-1 is the perfect way to add some height to your 2001-2010 GM 2500HD 2WD/4WD Pickup. The CST 9" Lift Kit is the basic / entry level version of the popular 9"-11" lift. This kit includes everything needed from CST for 9" of lift in the front, and 7" of lift in the rear for a level stance and plenty of clearance for 37" tires at an affordable price. This kit requires no cutting of the front differential or welding for installation. It maintains the factory track width and will drop down the factory suspension a true nine inches, ensuring that the factory steering and control arm geometry will remain within factory specifications. Like many other CST lifts, the CSS-C3-9-1 kit includes the unique one-piece sub-frame with strut bar supports, supported upper control arm drop mounts, steering drop down w/ heim jointed support links, a CST steering stabilizer and the differential drop. All covered in a high quality gloss black powdercoat finish. This version of the 9" kit also includes fabricated rear blocks, add-a-leafs, u-bolts and 4 CST street-series shocks (2 front / 2 rear). All CST Sub-Frame style lift kits include a new center-link with heim supports off the sub-frame to reduce wear and tear and add stability to the idler and pitman arms! If you desire more than 9" of lift in the rear, leaf springs willl be required (sold separately). Features: 9" Lift Kit Improved Ride and Handling Minimal CV Angle Changes Maintains O.E. Track Width Fits Up To 37" Tall Tire (See Notes Below) No Cutting Or Welding Required For Installation Notes - Please Read For Additional Required Components: This is a 9" lift, if you want a higher lift you will need to order a different kit. Clears 37" tires without trimming on 8"-10" wide wheels w/ 4"-4.75" of backspacing. Other wheel and tire sizes will be up to the installer to determine fitment, installation, and trimming if needed. Trucks with 2-piece rear driveshaft may required carrier shim. Driveshaft upgrade recommended for frequent highway use in 4WD. 3500HD Owners: This kit was designed and tested for the 2500HD trucks. It can be used on 3500HD and 3500HD Dually if the purchaser / installer is able to provide custom u-bolts for their application. Due to the many different spring and axle configurations, u-bolts are not included or offered for the 3500HD models. Neither XDP or CST offer u-bolts for these applications. You must be able to source them locally. Custom carrier bearing spacer may be required as well. Truck Freight Item: Allow 1-2 Weeks for delivery. Truck freight charges apply.
CST 9"-11" Front Suspension Lift Kit CSS-C3-9 30408 350.00 CST 9"-11" Front Suspension Lift Kit CSS-C3-9
$ 2579.8
The CST 9"-11" Suspension Lift Kit CSS-C3-9 provides clearance for larger tires, durability, and an improved ride in your 2001-2010 GM 2500HD Pickup. The CST Suspension Lift Kit requires no cutting of the differential or welding and will keep the factory track width. This CST System will drop down the factory suspension a true nine inches, ensuring that the factory steering and control arm geometry will remain within factory specifications. Like many of the other CST Lift Kits, the CSS-C3-9 kit includes the unique one-piece high-clearance sub-frame with strut bar supports, supported upper control arm mounts, steering drop down with heim jointed support linkage, 4WD differential drop down, or 2WD cross bar all in a high quality gloss black powdercoat finish. All CST Sub-Frame Style Lift Kits include a new center-link with heim supports off of the sub-frame to reduce wear and tear and add stability to idler and pitman arms. This lift kit is for the front only. Rear leaf springs or a block and add-a-leaf kit are required to lift the rear. Wheel and Tire Guidelines: 37" x 12.50" or 13.5" tires, no trimming on 8"-11" wide wheels. 38" x 13.5" or 14.5" tires with minor timming on 9"-10" wide wheels. 38" x 15.5" tires on 9"-10" wide wheels with trimming (set kit to 11") 40" x 13.5" tires on 9" wide wheels with trimming (set kit to 11") Aftermarket bumpers greatly increase tire clearance Max approved/tested backspacing 4.75" Anything larger, taller, or wider is up to the installer. Features: 9"-11" Front Lift Improved Ride and Handling Minimal CV Angle Changes Maintains O.E. Track Width No Cutting Or Welding Required For Installation Notes - Please Read For Additional Required Components: Other wheel and tire sizes will be up to the installer to determine fitment, installation, and trimming if needed. Trucks with 2-piece rear driveshaft require carrier shim. Driveshaft upgrade recommended for frequent highway use in 4WD. Shocks not included. 3500HD Owners: This kit was designed and tested for the 2500HD trucks. It can be used on 3500HD and 3500HD Dually if the purchaser / installer is able to provide custom u-bolts for their application. Due to the many different spring and axle configurations, u-bolts are not included or offered for the 3500HD models. Neither XDP or CST offer u-bolts for these applications. You must be able to source them locally. Custom carrier bearing spacer may be required as well. Truck Freight Item: Allow 1-2 Weeks for delivery. Truck freight charges apply.
CST 9"-11" Lift Kit CSK-C23-21 30380 350.00 CST 9"-11" Lift Kit CSK-C23-21
$ 4923.3
The CST 9"-11" Lift Kit CSK-C23-21 is the perfect way to add some height to your 2001-2010 GM 2500HD 2WD/4WD Pickup. The popular 9"-11" lift includes the needed components to lift the front and rear of your truck with plenty of clearance for 37" tires at an affordable price. This kit requires no cutting of the front differential or welding for installation. It maintains the factory track width and will drop down the factory suspension a true nine inches, ensuring that the factory steering and control arm geometry will remain within factory specifications. Like many other CST lifts, this kit includes the unique one-piece sub-frame with strut bar supports, supported upper control arm drop mounts, steering drop down w/ heim jointed support links, and the differential drop. All covered in a high quality gloss black powdercoat finish. This kit also includes rear leaf springs, CST uni-ball gen II dirt-series UCA kit and dual shock hoops. Wheel and Tire Guidelines: 37x12.5" or 13.5 no trimming on 8"-11" wide wheels. 38x13.5" or 14.5 tires with minor trimming on 9"-10" wide wheels. 38x15.5" on 9"-10" wide wheels requires trimming (set kit to 11") 40x13.5 on 9" wide wheels requires trimming (set kit to 11") Features: 9"-11" Lift Kit Improved Ride and Handling Minimal CV Angle Changes Maintains O.E. Track Width Fits Up To 37" Tall Tire (See Notes Below) No Cutting Or Welding Required For Installation Shocks Not Included Notes - Please Read For Additional Required Components: Other wheel and tire sizes will be up to the installer to determine fitment, installation, and trimming if needed. Aftermarket bumpers greatly increase tire clearance. Trucks with 2-piece rear driveshaft require carrier shim. Driveshaft upgrade recommended for frequent highway use in 4WD. 3500HD Owners: This kit was designed and tested for the 2500HD trucks. It can be used on 3500HD and 3500HD Dually if the purchaser / installer is able to provide custom u-bolts for their application. Due to the many different spring and axle configurations, u-bolts are not included or offered for the 3500HD models. Neither XDP or CST offer u-bolts for these applications. You must be able to source them locally. Custom carrier bearing spacer may be required as well. Truck Freight Item: Allow 1-2 Weeks for delivery. Truck freight charges apply.
Performance Accessories 3" Body Lift Kit 10123 14510 50.00 Performance Accessories 3" Body Lift Kit 10123
$ 529.99
No one does body lift kits better than Performance Accessories. We are proud to offer the most complete line of body lift kits in the world. When you purchase a lift kit for your truck you want to install it, with no problems. We work hard to make that reality. Not only do we design every body lift kit right here in Chino Valley AZ, USA, we also manufacture all the parts (spacers, steering extensions, bumper brackets, etc.) and assemble all of the kits right here as well. Put that together with our easy-to-follow instructions and you have a winning combination! When installing your body lift kit, remember to order your set of custom fit urethane Gap Guards to hide the gap between frame and body, and keep the engine compartment clean. Features: Body Lift Lift Height: 3" Reinforced Nylon Body Blocks Hardware and Detailed Instructions Included Limited Lifetime Warranty Tech Notes: 6,7,15,21,24,28,30,35 6: Front and rear bumper brackets are included with this kit. 7: Modification to the front frame horns will be required to raise the front bumper using the bumper brackets included. 15: Steering extension included. 21: Rear bumper brackets are to enhance appearance only, bumper can not be used for towing. 24: Gap guards available and sold separately for this application. 28: Manual transmission models require a shift lever extension or linkage bracket sold separately. 30: Will not fit vehicle equipped with gasoline engine 35: Requires cutting the front bumper fascia to allow clearance for front frame horns
Performance Accessories Premium 5" Lift System PLS114 14496 77.00 Performance Accessories Premium 5" Lift System PLS114
$ 599.39
Performance Accessories Premium Lift Systems offer an affordable lift solution for Truck. Combining Performance Accessories body lift kit, leveling kit and gap guards, Premium Lift Systems are the most economical way to raise your vehicle. Premium Lift Systems deliver the most lift for the money of any lift solution available today! Premium quality and appearance, without the premium price tag! Features: Body Lift, Leveling Kit and Gap Guards Levels Vehicle Stance Lift Height: 5" Reinforced Nylon Body Blocks Required Hardware and Detailed Instructions Included Limited Lifetime Warranty Tech Notes: 6,7,15,21,28,35 6: Front and rear bumper brackets are included with this kit 7: Modification to the front frame horns required to raise front bumper using provided brackets 15: Steering extension included. 21: Rear bumper brackets are to enhance appearance only, bumper can not be used for towing. 28: Manual transmission models require shift lever extension sold separately 35: Requires cutting of front bumper fascia to allow clearance for frame horns.
Tuff Country 2" Lift Kit 70247 0.00 Tuff Country 2" Lift Kit
$ 249.21
Weather your 2001-2010 GM Silverado/Sierra 2500HD/3500HD 4WD has Purple, Green, Orange, or White marked factory torsion bars, Tuff Country has a 2” lift kit available for your application. These lift kits feature new torsion keys, gives you option of running rear blocks or Add-A-Leafs, and give the choice of running new shocks or shock extensions. Features:Made In The USANew Torsion KeysAvailable With Shocks Or Shock ExtensionsLimited Lifetime WarrantyApplication Note: Recommended Tire Size 31x10.50.
Tuff Country 4" Lift Kit With 1-Piece Subframe 70250 0.00 Tuff Country 4" Lift Kit With 1-Piece Subframe
$ 2220.11
Elevate the height and style of your 2001-2010 GM Silverado/Sierra 2500HD/3500HD 4WD with the Tuff Country 4" Lift Kit With 1-Piece Subframe. These lift kits are specifically engineered for the IFS suspension and feature robust steering knuckles, a 1-piece sub-frame that does not require any specialty tools for installation and preserves factory ride quality. Features:Made In The USAMaintains Factory RideHeavy Duty Steering KnucklesLimited Lifetime WarrantyApplication Notes: Will Not Fit Dually ModelRequires new wheels with 4.5" backspacing or less. Recommended tire size 33x12.50; Amount of lift front and rear: 4" / 2".
Tuff Country 4" Lift Kit With 3-Piece Subframe 70251 0.00 Tuff Country 4" Lift Kit With 3-Piece Subframe
$ 2348.22
Take your 2001-2010 GM Silverado/Sierra 2500HD/3500HD 4WD to the next level with the Tuff Country 4" Lift Kit With 3-Piece Subframe. This lift kit does not require any specialty tools for installation and features a factory ride as it is specifically designed for the IFS suspension and heavy duty steering knuckles to added strength off road. Features:Made In The USAMaintains Factory RideHeavy Duty Steering KnucklesLimited Lifetime WarrantyApplication Notes: Will Not Fit Dually ModelRequires new wheels with 4.5" backspacing or less. Recommended tire size 33x12.50; Amount of lift front and rear: 4" / 2".
Tuff Country 6" Lift Kit With 1-Piece Subframe 70254 0.00 Tuff Country 6" Lift Kit With 1-Piece Subframe
$ 2651.09
Take your 2001-2010 GM Silverado/Sierra 2500HD/3500HD 4WD to new heights with the Tuff Country 6" Lift Kit With 1-Piece Subframe. These lift kits are specifically designed for the IFS suspension and feature heavy duty steering knuckles and maintains factory ride comfort with a 1-piece sub-frame that does not require any specialty tools for installation.Features:Made In The USAMaintains Factory RideHeavy Duty Steering KnucklesLimited Lifetime WarrantyApplication Note: Will Not Fit Dually ModelRequires new wheels with 4.5" backspacing or less. Recommended tire size 35x12.50; Amount of lift front and rear: 6" / 4".
Tuff Country 6" Lift Kit With 3-Piece Subframe 70255 0.00 Tuff Country 6" Lift Kit With 3-Piece Subframe
$ 2747.32
Give your 2001-2010 GM Silverado/Sierra 2500HD/3500HD 4WD a great new look and a serious altitude adjustment by installing a Tuff Country 6" Lift Kit With 3-Piece Subframe. This lift kit does not require any specialty tools for installation and features heavy duty steering knuckles, and maintains factory ride comfort as it is specifically designed for the IFS suspension.Features:Made In The USAMaintains Factory RideHeavy Duty Steering KnucklesLimited Lifetime WarrantyApplication Notes: Will Not Fit Dually ModelRequires new wheels with 4.5" backspacing or less. Recommended tire size 35x12.50; Amount of lift front and rear: 6" / 4".