{{ product.name }}
See New Part # {{ product.superseded_product_sku }}
{{ determineProductPrice( product ) }}
{{ determineProductSalePrice( product ) }}
0
No Products
No Results
Showing Parts for —
{{ active_vehicle.name }}
Did you mean {{ response.didYouMean.query }}?
Helper Springs & Load Control
The Air Lift 52202 AirCell Load Support will provide support for heavy loads on your 01-10 GM 2500HD/3500HD Pickup. AirCell is a low cost, maintenance free microcellular urethane spring designed to reduce squat and enhance ride comfort in vehicles with constant loads. No Inflation or deflation necessary. Install it and forget it. At half the cost of steel overload springs, the AirCell provides a better ride than steel or rubber load supports.
Features:
Reduces Squat
Enhances Ride Comfort
Quick, Easy Installation
Application: 01-10 Silverado / Sierra 2500HD/3500HD 2WD/4WD (Rear)
The Air Lift 57275 LoadLifter 5000 Air Spring Kit is specifically engineered for your 01-10 GM 2500HD/3500HD Pickup while towing and hauling your heaviest loads with full-time load support. These tough, durable air springs provide up to 5,000 pounds of leveling capacity and are fully adjustable to keep your vehicle riding stable, level and comfortable whether loaded or unloaded.
Air Lift adjustable air springs work with your existing suspension to give your vehicle more leveling support when you need it, so your vehicle is always level and stable. Proper weight distribution to all tires means more safety and a more comfortable ride as well. This results in:
Improved braking and steering: when all four tires are firmly on the ground, braking time and steering are both improved.
Less sway: Air springs increase spring rate and vastly improve vehicle stability.
Less bottoming out: Air springs provide adjustable load support to help prevent bottoming out on rough roads.
Headlight aim: Only level and stable vehicles provide safe and proper headlight aiming.
More even tire wear: when weight is evenly distributed to all four tires, tires wear more evenly.
Less porpoising: Even heavy pickups which dont squat when loaded can begin to porpoise vertically when towing heavy trailers. Adjustable air springs dramatically reduce this problem for a safer, more comfortable ride.
The kit includes 2 air springs, brackets, air lines, Schrader valve and all of the hardware you need for installation. LoadLifter 5000 air spring kits are engineered to be installed in under 2 hours and include a fully illustrated, user-friendly instruction manual.
Features:
Up To 5,000lbs Of Leveling Capacity
Air Adjustable From 5 To 100 PSI
Includes Roll Plates To Protect The Air Springs
Quick Connecting, Easy-To-Use Air Fittings
Built Like A Tire and Reinforced w/ 2-Ply Fabric For Maximum Strength
Applications: 01-10 GM Silverado/Sierra 2500HD/3500HD 2WD/4WD
Notes:
Fits Dual (DRW) and Single Rear Wheel (SRW)
Fits most side mounted fifth wheel hitch applications
Will not fit Cab and Chassis models
Will not fit Quadrasteer
The Air Lift 57338 LoadLifter 5000 Helper Spring Kit is specifically engineered for your 01-10 GM 3500HD Cab and Chassis while towing and hauling your heaviest loads with full-time load support. These tough, durable air springs provide up to 5,000 pounds of leveling capacity and are fully adjustable to keep your vehicle riding stable, level and comfortable whether loaded or unloaded.
Air Lift adjustable air springs work with your existing suspension to give your vehicle more leveling support when you need it, so your vehicle is always level and stable. Proper weight distribution to all tires means more safety and a more comfortable ride as well. This results in:
Improved braking and steering: when all four tires are firmly on the ground, braking time and steering are both improved.
Less sway: Air springs increase spring rate and vastly improve vehicle stability.
Less bottoming out: Air springs provide adjustable load support to help prevent bottoming out on rough roads.
Headlight aim: Only level and stable vehicles provide safe and proper headlight aiming.
More even tire wear: when weight is evenly distributed to all four tires, tires wear more evenly.
Less porpoising: Even heavy pickups which dont squat when loaded can begin to porpoise vertically when towing heavy trailers. Adjustable air springs dramatically reduce this problem for a safer, more comfortable ride.
Features:
Up To 5,000lbs Of Leveling Capacity
Air Adjustable From 5 To 100 PSI
Includes Roll Plates To Protect The Air Springs
Quick Connecting, Easy-To-Use Air Fittings
Built Like A Tire and Reinforced w/ 2-Ply Fabric For Maximum Strength
Applications: 01-10 GM Silverado/Sierra 3500HD Cab and Chassis
Note: Fits Cab and Chassis models only
The Air Lift 88275 LoadLifter 5000 Ultimate Helper Spring Kit for your 01-10 GM Silverado/Sierra 2500HD / 3500HD features all the benefits of the LoadLifter 5000 with the addition of an internal jounce bumper inside the spring for the ultimate in ride comfort.
The LoadLifter 5000 ULTIMATE works with your vehicles leaf springs to provide up to 5,000 lbs. of front load leveling capacity and keeps the vehicle riding stable, level and comfortable whether loaded or unloaded. The built-in closed-cell urethane foam jounce bumper inside the air spring provides a cushion of air that absorbs shock, eliminates harsh jarring on rough roads and protects vehicles carrying heavy loads. Never bottom out again with the ULTIMATE!
The Air Lift Air springs are built like a tire and are reinforced by durable,2-ply fabric for maximum strength. Exclusive upper and lower roll plates are included which protect the springs from sharp edges, such as brackets or the frame and help increase load capacity up to 10%. Includes 2 sir springs, mounting brackets, air lines, schrader valve, hardware and instructions.
Features:
Built-In Internal Jounce Bumper
Up To 5,000lbs Of Leveling Capacity
Air Adjustable From 0 To 100 PSI
Includes Roll Plates To Protect The Air Springs
Quick Connecting, Easy-To-Use Air Fittings
Built Like A Tire and Reinforced w/ 2-Ply Fabric For Maximum Strength
Application: 01-10 GM Silverado/Sierra 2500HD/3500HD 2WD/4WD
Note:
Fits Dual (DRW) and Single Rear Wheel (SRW)
Fits most side mounted fifth wheel hitch applications
Will not fit Cab and Chassis models
The Air Lift 88286 LoadLifter 5000 Ultimate Helper Spring Kit for your 01-10 GM Silverado/Sierra 3500HD Cab and Chassis features all the benefits of the LoadLifter 5000 with the addition of an internal jounce bumper inside the spring for the ultimate in ride comfort.
The LoadLifter 5000 ULTIMATE works with your vehicles leaf springs to provide up to 5,000 lbs. of front load leveling capacity and keeps the vehicle riding stable, level and comfortable whether loaded or unloaded. The built-in closed-cell urethane foam jounce bumper inside the air spring provides a cushion of air that absorbs shock, eliminates harsh jarring on rough roads and protects vehicles carrying heavy loads. Never bottom out again with the ULTIMATE!
The Air Lift Air springs are built like a tire and are reinforced by durable,2-ply fabric for maximum strength. Exclusive upper and lower roll plates are included which protect the springs from sharp edges, such as brackets or the frame and help increase load capacity up to 10%. Includes 2 sir springs, mounting brackets, air lines, schrader valve, hardware and instructions.
Features:
Built-In Internal Jounce Bumper
Up To 5,000lbs Of Leveling Capacity
Air Adjustable From 0 To 100 PSI
Includes Roll Plates To Protect The Air Springs
Quick Connecting, Easy-To-Use Air Fittings
Built Like A Tire and Reinforced w/ 2-Ply Fabric For Maximum Strength
Application: 01-10 GM Silverado/Sierra 3500HD
Note: Fits Cab and Chassis only
Add stability and comfort to your 2001-2010 GM Silverado/Sierra 2500HD/3500HD when you need it most with the Air Lift 89275 LoadLifter 5000 Ultimate Plus Helper Spring Kit. The LoadLifter 5000 Ultimate Plus Helper Spring Kit gives you all the benefits of the LoadLifter 5000 Ultimate, but with the addition of high quality, long lasting, stainless steel components.
Designed to work with your vehicle's suspension to provide up to 5,000 lbs of load leveling capacity, the LoadLifter 5000 Ultimate Plus Helper Spring Kit keeps your truck riding stable, level, and comfortable whether you're running empty, or you're hauling a load.
Each air bag features an internal closed-cell urethane foam jounce bumper that provides a cushion of air to absorb shock. This jounce bumper also helps eliminate the harsh ride on rough roads, and of course protects your truck when carrying heavy loads. LoadLifter 5000 ULTIMATE air springs are maintenance free! Because of the internal jounce bumper, you can safely run with zero air pressure.
The stainless steel components are what set the Ultimate Plus apart from other Air Lift kits. Designed for the elite hauler, these exclusive upgrades include stainless steel mounting hardware, roll plates and braided air line. Now you can finish off your installation with a durable, braided air line featuring military-grade AN fittings for a leak-free seal and no air line cutting required.
Features:
LoadLifter 5000 Ultimate Plus
Built-In Internal Jounce Bumper
Up To 5,000lbs Leveling Capacity
Includes Exclusive Stainless Components
Stainless Steel Roll Plates Increase Load Capacity Up To 10%
Built Like A Tire and Reinfoced With 2-Ply Fabric For Maximum Strength
Application Notes:
Fits Dual (DRW) and Single Rear Wheel (SRW)
Fits most side mounted fifth wheel hitch applications
Will not fit Cab and Chassis models
Does not fit Quadrasteer models.
The Cognito 210-90263 Front Sway Bar provides your 2001-2010 GM 8-LUG Truck (Lifted W/Aftermarket End Links) with the ultimate control. Expertly engineered to reduce body roll, the Cognito Sway Bar improves traction. The Front Sway Bar measures 1.5" in diameter and constructed from heat treated and hot formed 4140 chromoly steel for extra strength and durability. The Cognito Sway Bar is made in the USA and includes Polyurethane bushings.Features:Made In The USA!Distributes Weight EvenlyHigh Tech Polyurethane BushingsPowder Coated Hammertone FinishHeat Treated and Hot Formed 4140 Chromoly Steel For Extra Strength and Durability
We want our trucks to do everything. Hit the trails, tow the boat to the river, take us to work and transport the family on long road trips. Adding an air bag system to your full-size truck or SUV has always meant scratching at least one of those off your list.
With most air bag systems, the lower air bag mount is placed above the leaf spring significantly reducing wheel travel by design. Your air bag system should compliment your truck, not inhibit its ability. Daystars new Air Bag Cradle* (Patent Pending) mounts to your trucks lower suspension providing more room for the air bag to safely cycle with no loss of overall wheel travel.
Inferior lower air bag mounts restrict air bag movement using inadequate space, which can lead to unexpected damage to the air bag. Made from extremely tough Daystar Polyurethane, the Air Bag Cradle allows for full suspension travel, while still allowing the full benefits of your air bag system. The Air Bag Cradle fits most full-size pick up trucks, and SUVs running 6-inch diameter air bags and are made in the USA.
Features:
Allows For Full Suspension Travel With Air Bag Systems
Built From Extremely Tough Daystar Polyurethane
Limited Lifetime Warranty
Made In The USA!
The Firestone 2012 Airline Service Kit for your Ride-Rite and Sport-Rite Air Bags provides you with the components needed to replace the airlines on your Firestone Air Bags.
Features and Kit Contents
Fits Ride-Rite and Sport-Rite
Includes: 18ft red 1/4" airline, 2 inlet elbow fittings, 1 union tee, 2 inflation valves.
The Firestone 2249 Ride-Rite Air Bag Helper Springs for your 2001-2010 GM C2500HD/C3500HD will provide load support through the use of air pressure that can be adjusted for changing loads. Mounting between the frame and suspension of your truck, these Air Bag Helper Springs will enhance ride characteristics by reducing inter-leaf friction. The easy-to-adjust bags feature individual inflation valves that allow for separate side-to-side or front to rear adjustment, these will keep your truck level when carrying off-center loads.
These heavy-duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200-5,000 lbs per set. Each air spring is pressure tested before leaving the factory.
Features:
Level Front-To-Rear and Side-To-Side
Adjustable From 5-100 PSI
Provides Additional Loaded Stability
Maximize Vehicles Load Carrying Capacity
Includes:
Air Springs
Upper and Lower Brackets
Inflation Valves and Air Line
Instructions, Hardware and Fittings
Note: Only for use on Cab and Chassis models.
The Firestone 2250 Ride-Rite Air Bag Helper Springs for your 01-10 GM 2500HD/3500HD Pickup will provide load support through the use of air pressure
that can be adjusted for changing loads. Mounting between the frame and
suspension of your truck, these Air Bag Helper Springs will enhance
ride characteristics by reducing inter-leaf friction. The easy-to-adjust
bags feature individual inflation valves that allow for separate
side-to-side or front to rear adjustment, these will keep your truck
level when carrying off-center loads.
These heavy-duty convoluted air springs will handle all leveling needs with load carrying capacities between 3,200-5,000 lbs per set. Each air spring is pressure tested before leaving the factory.
Features:
Level Front-To-Rear and Side-To-Side
Adjustable From 5-100 PSI
Provides Additional Loaded Stability
Maximize Vehicles Load Carrying Capacity
Includes:
Air Springs
Upper and Lower Brackets
Inflation Valves and Air Line
Instructions, Hardware and Fittings
Tech Notes:
For trucks with and without in-bed hitch.
No-drill installation
Additional InformationInstall Sheet
The Firestone 2366 2" Air Spring Lift Spacer allows you to lift your truck while still retaining use of your Firestone Ride-Rite Air Bag Helper Springs. This spacer is for use on air bags that are axle and leaf spring mounted. Sold as package of 2.
Features:
Block Size: 2"
Distance Between Brackets - 7.5" - 8.5"
Allows For Air Bag Helper Springs On Lifted Trucks
The Firestone 2367 3" Air Spring Lift Spacer allows you to lift your truck while still retaining use of your Firestone Ride-Rite Air Bag Helper Springs. This spacer is for use on air bags that are leaf spring mounted. Sold as package of 2.
Features:
Block Size: 3"
Distance Between Brackets - 8.5" - 9.5"
Allows For Air Bag Helper Springs On Lifted Trucks
The Firestone 2368 3" Air Spring Lift Spacer allows you to lift your truck while still retaining use of your Firestone Ride-Rite Air Bag Helper Springs. This spacer is for use on air bags that are axle mounted. Sold as package of 2.
Features:
Block Size: 3"
Distance Between Brackets - 8.5" - 9.5"
Allows For Air Bag Helper Springs On Lifted Trucks
The Firestone 2370 4" Air Spring Lift Spacer allows you to lift your truck while still retaining use of your Firestone Ride-Rite Air Bag Helper Springs. This spacer is for use on air bags that are leaf-spring mounted. Sold as package of 2.
Features:
Block Size: 4"
Distance Between Brackets - 9.5" - 10.5"
Allows For Air Bag Helper Springs On Lifted Trucks
The Firestone 2371 4" Air Spring Lift Spacer allows you to lift your truck while still retaining use of your Firestone Ride-Rite Air Bag Helper Springs. This spacer is for use on air bags that are axle mounted. Sold as package of 2.
Features:
Block Size: 4"
Distance Between Brackets - 9.5" - 10.5"
Allows For Air Bag Helper Springs On Lifted Trucks
The Firestone 2373 5" Air Spring Lift Spacer allows you to lift your truck while still retaining use of your Firestone Ride-Rite Air Bag Helper Springs. This spacer is for use on air bags that are axle mounted. Sold as package of 2.
Features:
Block Size: 5"
Distance Between Brackets - 10.5" - 11.5"
Allows For Air Bag Helper Springs On Lifted Trucks
The Firestone 2374 6" Air Spring Lift Spacer allows you to lift your truck while still retaining use of your Firestone Ride-Rite Air Bag Helper Springs. This spacer is for use on air bags that are leaf spring mounted. Sold as package of 2.
Features:
Block Size: 6"
Distance Between Brackets - 11.5" - 12.5"
Allows For Air Bag Helper Springs On Lifted Trucks
The Firestone 2375 6" Air Spring Lift Spacer allows you to lift your truck while still retaining use of your Firestone Ride-Rite Air Bag Helper Springs. This spacer is for use on air bags that are axle mounted. Sold as package of 2.
Features:
Block Size: 6"
Distance Between Brackets - 11.5" - 12.5"
Allows For Air Bag Helper Springs On Lifted Trucks
The Firestone 2536 1.25" Air Spring Lift Spacer allows you to lift your truck while still retaining use of your Firestone Ride-Rite Air Bag Helper Springs. Lift spacers sold as package of 2.
Features:
Block Size: 1.25"
Distance Between Brackets - 6.5" - 7.5"
Allows For Air Bag Helper Springs On Lifted Trucks