Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Alliant Water Pump AP63563 14432 3.40 Alliant Water Pump AP63563
$ 167.89
OEM Part #: 98031233, 251-738, 12637105 Note: Includes mounting gaskets
Bostech WP01101 Water Pump 30460 8.00 Bostech WP01101 Water Pump
$ 89.95
The Bostech WP01101 Water Pump for your 2006-2010 GM 6.6L Duramax LBZ/LMM is built from top quality materials and is produced under strict quality control guidelines. This pump is built to meet or exceed OE standards and is a bolt-on replacement. Features: High Quality Construction Replaces OE Part#: 98031233 13 Month Unlimited Mileage Warranty Bostech Old Part#: WP101
CSF 10551 A/C Condenser 34836 8.80 CSF 10551 A/C Condenser
$ 54.29
The CSF 10551 A/C Condenser is a direct replacement for the failed or damaged condenser in your 2001-2014 GM 6.6L Duramax. CSF Condensers are manufactured to match the OE specifications and OE materials used in your factory unit. CSF Factories are ISO and TSO certified to ensure high quality components. The 10551 matches the OE measurements to fit in your factory mounting points and re-installs with OE plumbing. Features:Direct-Fit ReplacementUses Factory Mounting PointsManufactured In ISO/TSO Cerified FactoriesSpecifications:Construction: Parallel FlowCore Length (in): 29 Core Thickness (In): 5/7Core Width (in): 17 Hazardous Material: NoInlet Tube: Block FittingOutlet Tube: Block FittingApplications: 2001-2014 GM 6.6L Duramax 2500HD/3500HD (Without Ambulance Package)Cross Reference #: APDI 7014953, DPI 4953, GM 25967385, SPI 7-4953
Dorman 603-125 Coolant Reservoir 29255 5.00 Dorman 603-125 Coolant Reservoir
$ 78.95
Replace the old cracked Coolant Reservoir on your 2001-2007 GM 6.6L Duramax with the Dorman 603-125 Coolant Reservoir. Dormans Engine Coolant Recovery Tank is designed for enduring use. It resists the expansion and cracking that extreme temperature fluctuations can cause. Plus, the durable plastic construction prevents coolant fluid loss. Features: Direct Replacement Includes Reservoir Cap Quality Tested For Trouble-Free Performance Cross Reference Numbers: AC Delco Part#: RC98 GM OE Part#: 15085725, 15808714 Non-Direct Cross GM Part#: 15075118
Dorman 800-409 Heater Hose Connector 29175 1.00 Dorman 800-409 Heater Hose Connector
$ 7.34
The Dorman 800-409 Heater Hose Connector allows you replace the damaged factory connection on your 2001-2013 GM 6.6L Duramax. Dormans HVAC Heater Hose Connector resists brittleness, cracking, and leaking. The hose is designed to weather extreme temperatures from the engines coolant. This easy to install fitting features a durable plastic construction and does not require replacement of the entire hose assembly. Features: Material: Plastic Fitting Angle: Straight Fitting Attachment End 1: 0.75" Quick Disconnect Fitting Attachment End 2: 5/8" Hose Barb GM OE Numbers: 15032062, 15151875 Note: Will not work on models with ambulance package.
Dorman 82597 Coolant Reservoir Cap 29212 1.00 Dorman 82597 Coolant Reservoir Cap
$ 8.81
The Dorman 82597 Coolant Reservoir Cap is a direct replacement for your 2001-2007 GM 6.6L Duramax. Dorman Engine Coolant Recovery Tank Caps are constructed of high-quality plastic. They protect the cooling system by providing a tight seal against the elements. Features: Direct Replacement Replacement Cap - No Need To Replace Entire Tank Cross Reference Numbers: ACDelco Part#: RC98 GM OE Part#: 15075118
GM 12637105 Water Pump 28420 6.40 GM 12637105 Water Pump
$ 259.18
The GM 12637105 Water Pump is a direct replacement for the OE component on your 2006-2016 GM 6.6L Duramax. Features: OE Replacement ACDelco Part# 251-748
GM 25841843 Lower Radiator Hose 34859 5.40 GM 25841843 Lower Radiator Hose
$ 271.24
The GM 25841843 Lower Radiator Hose is a direct replacement for the aging lower coolant hose on your 2006-2010 GM 6.6L Duramax. Over time the factory hoses can become brittle and cause leaks due to age and countless heat cycles. Choose OE GM / ACDelco products to ensure a perfect fit and finish. Features:Genuine OE ReplacementLower Radiator Hose For LBZ/LMM EnginesACDelco Part# 26570X
GM 97241129 Front Thermostat 28384 2.00 GM 97241129 Front Thermostat
$ 49.56
The GM 97241129 Front Thermostat is a factory replacement for your 2001-2018 GM 6.6L Duramax. This Thermostat features the same OE activation temp and is a drop-in replacement for the Front Thermostat equipped from the factory. Features: Front Thermostat 185 Degree (OE Temp) AC Delco Part#: 131-163
GM 97241130 Rear Thermostat 28385 1.00 GM 97241130 Rear Thermostat
$ 43.33
The GM 97241130 Rear Thermostat is a factory replacement for your 2001-2018 GM 6.6L Duramax. This Thermostat features the same OE activation temp and is a drop-in replacement for the Rear Thermostat equipped from the factory. Features: Rear Thermostat 180 Degree (OE Temp) AC Delco Part#: 131-131
HSP Factory Replacement Coolant Tank 39939 12.00 HSP Factory Replacement Coolant Tank
$ 325
Replace the unsightly, yellowed, and brittle plastic factory coolant reservoir in your 2001-2007 GM 6.6L Duramax with this sleek custom aluminum HSP Factory Replacement Coolant Tank. HSP CNC cuts and bends each tank for an excellent fit in the stock location. A factory low coolant sensor, fittings, and hardware are included to connect to the original cooling system for a worry-free installation. The aluminum construction will outlast any plastic tank and is available in multiple powder coat color options to match anyone's style. Features:Direct Fit Factory ReplacementFactory Low Coolant SensorIncludes Installation HardwareBuilt To Last Aluminum Construction
HSP LBZ/LMM Billet Thermostat Housing Kit 39952 11.00 HSP LBZ/LMM Billet Thermostat Housing Kit
$ 359
The HSP LBZ/LMM Billet Thermostat Housing Kit removes the obstructive factory coolant hose routing on your 2006-2010 GM 6.6L Duramax. A CNC billet aluminum upper thermostat housing makes extra room for larger aftermarket turbos in the valley as well as dual cp3 setups by eliminating the factory coolant hose that crosses over the driver side valve cover. HSP utilizes reinforced silicone boots and a hard tube for added strength versus the factory rubber hose. This kit does not have provisions to return coolant from the turbocharger. Features:Reinforced Silicone BootsIncludes Installation HardwareCNC Billet Aluminum Upper Thermostat HousingAllows Room For Dual CP3 Kits And Larger TurbosImproved Design Allows Easier Access To Driver Valve CoverNote: For use with aftermarket turbos in the valley. No cooling provisions.
HSP LBZ/LMM Billet Thermostat Housing Kit With Coolant Return 39953 11.00 HSP LBZ/LMM Billet Thermostat Housing Kit With Coolant Return
$ 389
Eliminate the headache when working on the driver side valve cover area of your 2006-2010 GM 6.6L Duramax with the HSP LBZ/LMM Billet Thermostat Housing Kit With Coolant Return. The factory coolant lines are routed in a way that makes it difficult adding performance accessories to your truck. HSP came up with a solution that removes the factory coolant hose that crosses over the drive side valve cover, making room for aftermarket turbo systems and fuel components. Multiple powder coat options available to add some style to your truck's engine bay.Features: Reinforced Silicone BootsAllows Room For Dual CP3 KitsEasier Access To Driver Side Of EngineCNC Billet Aluminum Upper Thermostat HousingNote: This kit features a coolant return that is for use with factory turbocharger in the valley.
Merchant Automotive 10089 Billet Coolant Block-Off Plate 33127 1.00 Merchant Automotive 10089 Billet Coolant Block-Off Plate
$ 65
The Merchant Automotive 10089 Billet Coolant Block-Off Plate eliminates the common leaking issue in your 2001-2017 GM 6.6L Duramax. The factory coolant block-off plate has a cast design with a gasket. Over time, this plate commonly begins to leak. Merchant Automotive has designed this billet block-off plate with a built-in o-ring seal for a leak-free installation. Features: Billet Construction Replaces Factory Block-Off Plate Installs Using Factory Bolts and Hardware
Merchant Automotive 10543 Water Pump Kit With Cover 34124 10.00 Merchant Automotive 10543 Water Pump Kit With Cover
$ 275.45
Replace the water pump in your 2006-2016 GM 6.6L Duramax with the Merchant Automotive 10543 Water Pump Kit With Cover. This kit includes the flywheel lock, gaskets, and o-rings needed for installation. Features:Complete Kit Replacement Water Pump Note: Some existing factory hardware will be re-used during installation.
Mishimoto High Temperature Thermostats MMTS-CHV-01DH 12975 5.00 Mishimoto High Temperature Thermostats MMTS-CHV-01DH
$ 72.95
The Mishimoto Chevrolet Duramax high temperature thermostats activate at a higher temperature than the OEM thermostats, making them the perfect solution for Duramax owners who live in colder climates, or have trouble reaching operating temperatures. Activating at a higher temperature means the thermostats will allow the coolant to stay in the engine longer delaying the coolant flowing through the radiator, which allows the engine to warm up sooner. Features: Faster warm-up time Great for those in cold climates Includes: 1 - 185 F Thermostat 1 - 191 F Thermostat Limited Lifetime Warranty
Mishimoto Low Temperature Thermostats MMTS-CHV-01DL 12976 5.00 Mishimoto Low Temperature Thermostats MMTS-CHV-01DL
3 5 2
$ 74.95
The Mishimoto Chevrolet Duramax low temperature thermostats activate at a lower temperature than the OEM thermostats, making them the perfect solution for Duramax owners who live in warmer climates, or use their trucks under heavy load or strenuous driving conditions. Activating at a lower temperature means coolant will begin flowing through the system and allow for cooler temperatures. Features: Great for those in warmer climates Keeps truck cooler under heavy loads Includes: 1 - 174 F Thermostat 1 - 180 F Thermostat Limited Lifetime Warranty
Mishimoto MMRAD-DMAX-06 Aluminum Performance Radiator 17802 15.00 Mishimoto MMRAD-DMAX-06 Aluminum Performance Radiator
2 5 1
$ 780.95
Mishimoto has released a direct-fit performance aluminum radiator for the 2006-2010 Chevrolet/GMC 6.6L Duramax. Mishimoto performance radiators are manufactured from high-quality aircraft-grade aluminum with a 100% brazed aluminum core and polished end tanks. The Mishimoto 6.6L Duramax performance radiator offers increased cooling efficiency, and the all-aluminum TIG-welded construction provides a rugged design that can take the abuse of any environment or terrain. Pair your Mishimoto 6.6L Duramax aluminum radiator with our silicone coolant hose kit for the ultimate in cooling performance and reliability. The Mishimoto 6.6L Duramax aluminum radiator retains factory fitment and requires no modification to your truck. Whether you use your Duramax for tearing up the drag strip or working at the job site, you can trust the Mishimoto performance radiator to keep your truck cool. As with all our products, this radiator is protected by the Mishimoto lifetime warranty. Features: Direct-Fit Replacement Specifications: Overall Size: 45.1 x 24.8 x 5.9 Core Size: 33.86" x 23.54 Rows: 2 Inlet: 1.81 Outlet: Factory-Style Quick Disconnect Core Thickness: 2.21 Tank Wall Thickness: .08 Drain Plug Thread Size: M12 x 1.5 LIFETIME WARRANTY Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer. A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product. The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid. MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products. Accident Protection Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
Mishimoto Silicone Hose Kit MMHOSE-CHV-06D 13010 5.00 Mishimoto Silicone Hose Kit MMHOSE-CHV-06D
5 5 1
$ 327.95
A leaking coolant hose can lead to serious engine damage if not quickly identified. Upgrade your cooling system with the Mishimoto 6.6L Duramax silicone coolant hose kit for the perfect combination of performance and durability. Mishimoto coolant hoses are manufactured with high-grade silicone and four layers of heat-resistant embedded fibers to provide increased pressure and temperature tolerance. The Mishimoto coolant hose kit is ideal for use on both stock and modified trucks for any environment or terrain. This hose kit also has billet CNCed quick disconnect ends for a direct OEM fitment with absolutely no cutting required. The Mishimoto 6.6L Duramax silicone coolant hose kit includes our signature lifetime warranty and is offered in black, blue, and red.Includes: (2) Silicone Hoses, (1) CNC Aluminum Coupler, (2) 2.25 T-bolt Clamps, (2) 2.75 T-bolt Clamps.Features: Retains OEM Snap RingDurable Silicone ConstructionCNC Machined From T-6061 AluminumMates Lower Radiator Hose To OEM and Mishimoto RadiatorTechnical Specifications: Interior Material:Heat Resistant Embedded FibersExterior Material: SiliconeMax Temperature: 330 FDimensions: Inside Diameter: Hose 1: 2.44 (at ends), 1.97, 1.00, .67Hose 2: 1.77Outside Diameter:Hose 1: 2.80 (at ends), 2.44 , 1.38 , 1.1Hose 2: 2.17Hose Thickness:Hose 1: 6mmHose 2: 5mmCNC CouplerIncludes: (2) Silicone Hoses, (1) CNC Aluminum Coupler, (2) 2.25 T-bolt Clamps, (2) 2.75 T-bolt Clamps.
PPE 116454025 Coolant Overflow Tank 17988 10.00 PPE 116454025 Coolant Overflow Tank
$ 296.99
The PPE 116454025 Coolant Overflow Tank will hold up to one gallon of coolant. Hand cut aluminum material provides more efficient cooling properties. This tank replaces the location of your secondary battery and plastic water overflow tank. Use in conjunction with Battery Remount Tray.Features:3/8" NPT to 1/2" Brass Hose Barb3/4" NPT to 1" Brass Hose BarbBillet fill neck with overflowApplications: 2001-2007 GM Duramax 6.6L Diesel 2500HD/3500HD 2001-2006 GM 1500/2500/3500 Gas