The Bostech WP01101 Water Pump for your 2006-2010 GM 6.6L Duramax LBZ/LMM is built from top quality materials and is produced under strict quality control guidelines. This pump is built to meet or exceed OE standards and is a bolt-on replacement.
High Quality Construction
Replaces OE Part#: 98031233
13 Month Unlimited Mileage Warranty
Bostech Old Part#: WP101CSF 10551 A/C Condenser348368.80
The CSF 10551 A/C Condenser is a direct replacement for the failed or damaged condenser in your 2001-2014 GM 6.6L Duramax. CSF Condensers are manufactured to match the OE specifications and OE materials used in your factory unit. CSF Factories are ISO and TSO certified to ensure high quality components. The 10551 matches the OE measurements to fit in your factory mounting points and re-installs with OE plumbing. Features:Direct-Fit ReplacementUses Factory Mounting PointsManufactured In ISO/TSO Cerified FactoriesSpecifications:Construction: Parallel FlowCore Length (in): 29 Core Thickness (In): 5/7Core Width (in): 17 Hazardous Material: NoInlet Tube: Block FittingOutlet Tube: Block FittingApplications: 2001-2014 GM 6.6L Duramax 2500HD/3500HD (Without Ambulance Package)Cross Reference #: APDI 7014953, DPI 4953, GM 25967385, SPI 7-4953Dorman 800-409 Heater Hose Connector291751.00
The Dorman 800-409 Heater Hose Connector allows you replace the damaged factory connection on your 2001-2014 GM 6.6L Duramax. Dormans HVAC Heater Hose Connector resists brittleness, cracking, and leaking. The hose is designed to weather extreme temperatures from the engines coolant. This easy to install fitting features a durable plastic construction and does not require replacement of the entire hose assembly.
Fitting Angle: Straight
Fitting Attachment End 1: 0.75" Quick Disconnect
Fitting Attachment End 2: 5/8" Hose Barb
GM OE Numbers: 15032062, 15151875
Note: Will not work on models with ambulance package.
GM 12637105 Water Pump284206.40
The GM 12637105 Water Pump is a direct replacement for the OE component on your 2006-2016 GM 6.6L Duramax.
Genuine GM PartDirect-Fit Replacement
ACDelco Part# 251-748
GM 25841843 Lower Radiator Hose348595.40
The GM 25841843 Lower Radiator Hose is a direct replacement for the aging lower coolant hose on your 2006-2010 GM 6.6L Duramax. Over time the factory hoses can become brittle and cause leaks due to age and countless heat cycles. Choose OE GM / ACDelco products to ensure a perfect fit and finish. Features:Genuine OE ReplacementLower Radiator Hose For LBZ/LMM EnginesACDelco Part# 26570XGM 97241129 Front Thermostat283842.00
The GM 97241129 Front Thermostat is a factory replacement for your 2001-2018 GM 6.6L Duramax. This Thermostat features the same OE activation temp and is a drop-in replacement for the Front Thermostat equipped from the factory.
185 Degree (OE Temp)
AC Delco Part#: 131-163
GM 97241130 Rear Thermostat283851.00
The GM 97241130 Rear Thermostat is a factory replacement for your 2001-2018 GM 6.6L Duramax. This Thermostat features the same OE activation temp and is a drop-in replacement for the Rear Thermostat equipped from the factory.
180 Degree (OE Temp)
AC Delco Part#: 131-131
HSP LBZ/LMM Billet Thermostat Housing Kit3995211.00
The HSP LBZ/LMM Billet Thermostat Housing Kit removes the obstructive factory coolant hose routing on your 2006-2010 GM 6.6L Duramax. A CNC billet aluminum upper thermostat housing makes extra room for larger aftermarket turbos in the valley as well as dual cp3 setups by eliminating the factory coolant hose that crosses over the driver side valve cover. HSP utilizes reinforced silicone boots and a hard tube for added strength versus the factory rubber hose. This kit does not have provisions to return coolant from the turbocharger. Features:Reinforced Silicone BootsIncludes Installation HardwareCNC Billet Aluminum Upper Thermostat HousingAllows Room For Dual CP3 Kits And Larger TurbosImproved Design Allows Easier Access To Driver Valve CoverNote: For use with aftermarket turbos in the valley. No cooling provisions. HSP LBZ/LMM Billet Thermostat Housing Kit With Coolant Return3995311.00
Eliminate the headache when working on the driver side valve cover area of your 2006-2010 GM 6.6L Duramax with the HSP LBZ/LMM Billet Thermostat Housing Kit With Coolant Return. The factory coolant lines are routed in a way that makes it difficult adding performance accessories to your truck. HSP came up with a solution that removes the factory coolant hose that crosses over the drive side valve cover, making room for aftermarket turbo systems and fuel components. Multiple powder coat options available to add some style to your truck's engine bay.Features: Reinforced Silicone BootsAllows Room For Dual CP3 KitsEasier Access To Driver Side Of EngineCNC Billet Aluminum Upper Thermostat HousingNote: This kit features a coolant return that is for use with factory turbocharger in the valley. HSP LMM Factory Replacement Coolant Tank3999712.00
Upgrade the factory coolant reservoir in your 2007.5-2010 GM 6.6L Duramax LMM with the HSP LMM Factory Replacement Coolant Tank. Featuring a sleek aluminum construction, HSP's coolant reservoir is CNC cut and bent for a perfect fit. The factory tank is not only ugly, it can become brittle over time. Finish up the underhood look on your truck with the HSP Factory Replacement Coolant Tank. Features: CNC Bent Aluminum Construction Factory Replacement TankMAHLE GS33752 Water Pump Gasket Kit1001260.11
Ensure your water pump is sealed properly when you add the MAHLE GS33752 Water Pump Gasket Kit to your 2001-2010 GM 6.6L Duramax. Designed as an OEM replacement, the Water Pump Gasket Kit maintains a tight seal and meets factory specifications. Features:OE Quality Maintains a Factory PerformanceMerchant Automotive 10089 Billet Coolant Block-Off Plate331271.00
The Merchant Automotive 10089 Billet Coolant Block-Off Plate eliminates the common leaking issue in your 2001-2017 GM 6.6L Duramax. The factory coolant block-off plate has a cast design with a gasket. Over time, this plate commonly begins to leak. Merchant Automotive has designed this billet block-off plate with a built-in o-ring seal for a leak-free installation.
Replaces Factory Block-Off Plate
Installs Using Factory Bolts and Hardware
Merchant Automotive 10093 Coolant Tank Parts Kit804611.00
The Merchant Automotive 10093 Coolant Tank Parts Kit is a for the diesel enthusiast who wants to build a custom coolant tank for their 2001-2010 GM 6.6L Duramax truck. This coolant tank kit includes everything you need to fabricate your own coolant tank, such as a radiator cap, radiator cap receiver, low fluid level sensor and all aluminum ports and bungs. This kit comes with all the ports on your stock coolant tank so that you do not have to remove coolant hoses to make your custom-made coolant tank a direct fit hook up. Features:Radiator Cap Low Coolant Sensor All Aluminum ComponentsMerchant Automotive 10543 Water Pump Kit With Cover3412410.00
Replace the water pump in your 2006-2016 GM 6.6L Duramax with the Merchant Automotive 10543 Water Pump Kit With Cover. This kit includes the flywheel lock, gaskets, and o-rings needed for installation. Features:Complete Kit Replacement Water Pump Note: Some existing factory hardware will be re-used during installation. Mishimoto High Temperature Thermostats MMTS-CHV-01DH129755.00
The Mishimoto Chevrolet Duramax high temperature thermostats activate at
a higher temperature than the OEM thermostats, making them the perfect
solution for Duramax owners who live in colder climates, or have trouble
reaching operating temperatures. Activating at a higher temperature
means the thermostats will allow the coolant to stay in the engine
longer delaying the coolant flowing through the radiator, which allows
the engine to warm up sooner.
Faster warm-up time
Great for those in cold climates
1 - 185° F Thermostat
1 - 191° F Thermostat
Limited Lifetime Warranty
Mishimoto Low Temperature Thermostats MMTS-CHV-01DL129765.00
The Mishimoto Chevrolet Duramax low temperature thermostats activate at a
lower temperature than the OEM thermostats, making them the perfect
solution for Duramax owners who live in warmer climates, or use their
trucks under heavy load or strenuous driving conditions. Activating at a
lower temperature means coolant will begin flowing through the system
and allow for cooler temperatures.
Great for those in warmer climates
Keeps truck cooler under heavy loads
1 - 174° F Thermostat
1 - 180° F Thermostat
Limited Lifetime Warranty
Mishimoto MMRAD-DMAX-06 Aluminum Performance Radiator1780215.00
Mishimoto has released a direct-fit performance aluminum radiator for the 2006-2010 Chevrolet/GMC 6.6L Duramax. Mishimoto performance radiators are manufactured from high-quality aircraft-grade aluminum with a 100% brazed aluminum core and polished end tanks. The Mishimoto 6.6L Duramax performance radiator offers increased cooling efficiency, and the all-aluminum TIG-welded construction provides a rugged design that can take the abuse of any environment or terrain.
Pair your Mishimoto 6.6L Duramax aluminum radiator with our silicone coolant hose kit for the ultimate in cooling performance and reliability. The Mishimoto 6.6L Duramax aluminum radiator retains factory fitment and requires no modification to your truck. Whether you use your Duramax for tearing up the drag strip or working at the job site, you can trust the Mishimoto performance radiator to keep your truck cool. As with all our products, this radiator is protected by the Mishimoto lifetime warranty.
Overall Size: 45.1 x 24.8 x 5.9
Core Size: 33.86" x 23.54
Outlet: Factory-Style Quick Disconnect
Core Thickness: 2.21
Tank Wall Thickness: .08
Drain Plug Thread Size: M12 x 1.5
Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer.
A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product.
The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid.
MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products.
Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
Mishimoto Silicone Hose Kit MMHOSE-CHV-06D130105.00
A leaking coolant hose can lead to serious engine damage if not quickly identified. Upgrade your cooling system with the Mishimoto 6.6L Duramax silicone coolant hose kit for the perfect combination of performance and durability. Mishimoto coolant hoses are manufactured with high-grade silicone and four layers of heat-resistant embedded fibers to provide increased pressure and temperature tolerance. The Mishimoto coolant hose kit is ideal for use on both stock and modified trucks for any environment or terrain. This hose kit also has billet CNCed quick disconnect ends for a direct OEM fitment with absolutely no cutting required. The Mishimoto 6.6L Duramax silicone coolant hose kit includes our signature lifetime warranty and is offered in black, blue, and red.Includes: (2) Silicone Hoses, (1) CNC Aluminum Coupler, (2) 2.25 T-bolt Clamps, (2) 2.75 T-bolt Clamps.Features: Retains OEM Snap RingDurable Silicone ConstructionCNC Machined From T-6061 AluminumMates Lower Radiator Hose To OEM and Mishimoto RadiatorTechnical Specifications: Interior Material:Heat Resistant Embedded FibersExterior Material: SiliconeMax Temperature: 330 FDimensions: Inside Diameter: Hose 1: 2.44 (at ends), 1.97, 1.00, .67Hose 2: 1.77Outside Diameter:Hose 1: 2.80 (at ends), 2.44 , 1.38 , 1.1Hose 2: 2.17Hose Thickness:Hose 1: 6mmHose 2: 5mmCNC CouplerIncludes: (2) Silicone Hoses, (1) CNC Aluminum Coupler, (2) 2.25 T-bolt Clamps, (2) 2.75 T-bolt Clamps. PPE 116111810 Modified Coolant Tube344824.50
The PPE 116111810 LMM Modified Coolant Tube has been specially designed for your 2007.5-2010 GM 6.6L Duramax LMM with the PPE Up-Pipes and Manifolds. PPE's expert fabricators cut, reposition and weld the coolant tube for the proper clearance. The coolant that flows through this tube provides heat to the heater core for the in-cab HVAC system. Features: Modified Coolant Tube For Use With PPE Up-PIpes and Manifolds