Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
AFE 49-04002 ATLAS 4" Downpipe-Back Race Exhaust System 11119 73.00 AFE 49-04002 ATLAS 4" Downpipe-Back Race Exhaust System
$ 412.96
The AFE 49-04002 ATLAS 4" Downpipe-Back Race Exhaust System for your 2007.5-2010 GM 6.6L Duramax is engineered to perform in the most extreme environments. This system is constructed from precision, mandrel bent 4 aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The 2-piece tailpipe and bayonet style hangers provide a hassle-free installation. To provide a leak-free seal, OE style band clamps are used that offer a 360º sealing area vs. cheap U-bolt clamps used in other systems. A 12" free-flowing straight-through designed muffler is used to produce a deep, powerful sound. Systems are available in 4 down pipe back with or without muffler. ATLAS exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style band clamps are used for a complete 360º sealing surface. Standard U-bolt clamps used by other systems only seal at the bottom and top of the tube allowing leak paths. Aggressive Sound: A free-flowing 12" wide muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: ATLAS exhaust systems are constructed of precision, mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: Downpipe-Back Race Exhaust 4" Mandrel Bent Aluminized Steel For Off-Road / Race Use Only System Options With Muffler 49-04002 Without Muffler 49-04002NM Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. Not for use on Cab and Chassis models.
AFE 49-04033NM ATLAS 5" Downpipe-Back No Muffler Race Exhaust System 15931 81.00 AFE 49-04033NM ATLAS 5" Downpipe-Back No Muffler Race Exhaust System
5 5 1
$ 595.5
The AFE 49-04033NM ATLAS 5" Downpipe-Back No Muffler Race Exhaust System for your 2007.5-2010 GM 6.6L Duramax is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 5" aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. This system is available in 5" down-pipe back without muffler. ATLAS exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A muffler eliminator pipe is used for a true race-inspired sound and maximum flow. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: ATLAS exhaust systems are constructed of 5" mandrel bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: Down-Pipe Back Race Exhaust 5" Aluminized Steel Construction No Muffler - "Straight Pipe Design" Bolt-On Replacement - From Factory Downpipe-Back Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-04040 ATLAS 5" DPF-Back Exhaust System 19340 33.00 AFE 49-04040 ATLAS 5" DPF-Back Exhaust System
$ 393.3
The AFE ATLAS system is constructed from 5" mandrel-bent aluminized steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: This ATLAS exhaust system is constructed of 5" mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility. Features: 5" Aluminized Steel Construction DPF-Back Exhaust System Available With No Tip, Polished Or Black Exhaust Tip Exhaust Tip Options No Tip 49-04040 Polished Tip 49-04040-P Black Tip 49-04040-B
AFE 49-04059 ATLAS 4" Downpipe-Back Exhaust System 28371 76.00 AFE 49-04059 ATLAS 4" Downpipe-Back Exhaust System
$ 466.83
The AFE 49-04059 ATLAS 4" Downpipe-Back Exhaust System for your 2001-2010 GM 6.6L Duramax features a 4" mandrel-bent aluminized steel construction for maximum flow, increased horsepower, torque and lower EGT's. This system uses high quality band clamps, OE-style bayonet hangers and includes an adjustable hanger clamp for a tight secure fitment. This unit is available with a free-flowing aluminized muffler and uses all factory mounting locations this provides for a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. Exhaust tip not included. Installation is a Snap: This Atlas System Includes an extension pipe and an adjustable hanger for a perfect fit. This kit uses factory mounting locations providing stability and hassle-free installation. Aluminized Muffler A free-flowing aluminized muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. Flow and Performance: This ATLAS exhaust system is constructed of 4" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. OE Fitment: OE-style hangers with bayonet tip are used to maintain a stable pipe location during high vibration and high heat conditions. Features: Turbo-Back Race Exhaust 4" Mandrel-Bent Aluminized Construction Aluminized Free-Flowing Performance Muffler Adjustable Hanger To Cover All Models From 2001-2010 Uses Factory Mounting Points For A Hassle-Free Installation Fitment Note: Fits Crew Cab/Short Bed, Crew Cab Long Bed, Extended Cab/Short Bed, and Extended Cab/Long Bed Warning: On 2007.5-2010 models, this free-flowing race exhaust requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-04059NM ATLAS 4" Downpipe-Back No Muffler Exhaust System 28370 65.00 AFE 49-04059NM ATLAS 4" Downpipe-Back No Muffler Exhaust System
5 5 1
$ 412.96
The AFE 49-04059NM ATLAS 4" Downpipe-Back No Muffler Exhaust System for your 2001-2010 GM 6.6L Duramax features a 4" mandrel bent construction and a mufflerless "straight-pipe" design for maximum flow, increased horsepower, increased torque and lower EGTs. This system uses high quality band clamps, OE-style bayonet hangers and includes an adjustable hanger clamp for a tight secure fitment. This unit uses all factory mounting locations this provides for a quick, hassle-free installation. This kit includes a muffler delete pipe for a more aggressive sound. ATLAS exhaust systems are the perfect combination of performance, fit and value. Exhaust tip not included. Installation is a Snap: This Atlas System Includes an extension pipe and an adjustable hanger for a perfect fit. This kit uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. Flow and Performance: This ATLAS exhaust system is constructed of 4" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. OE Fitment: OE-style hangers with bayonet tip are used to maintain a stable pipe location during high vibration and high heat conditions. Features: Turbo-Back Race Exhaust 4" Mandrel-Bent Aluminized Construction "Straight-Pipe" No-Muffler Exhaust System Adjustable Hanger To Cover All Models From 2001-2010 Uses Factory Mounting Points For Hassle-Free Installation Fitment Note: Crew Cab/Short Bed, Crew Cab Long Bed, Extended Cab/Short Bed, and Extended Cab/Long Bed Warning: On 2007.5-2010 models, this free-flowing race exhaust requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-04060 ATLAS 5" Downpipe-Back Race Exhaust System 33194 79.00 AFE 49-04060 ATLAS 5" Downpipe-Back Race Exhaust System
$ 681.29
The AFE 49-04060 ATLAS 5" Downpipe-Back Race Exhaust System for your 2001-2010 GM 6.6L Duramax features a 5" mandrel-bent aluminized steel tubing for maximum flow increased horsepower, increased torque and lower EGTs. This system uses high quality band clamps, OE-style bayonet hangers and includes an adjustable hanger clamp for a tight secure fitment. This unit uses all factory mounting locations this provides for a quick, hassle-free installation. AFE ATLAS exhaust systems are the perfect combination of performance, fit and value. Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal High quality band clamps are included for a complete 360 degree sealing surface. OE Fit OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance This ATLAS exhaust system is constructed of 5" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. High Flow Aluminized Muffler This aluminized steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed of aluminized steel and uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize exhaust flow. You will see increased performance and improved throttle response over the factory exhaust. Also featuring a stamped aFe POWER logo for an aggressive style. Muffler Specifications: 5" Center Inlet /Outlet, 7" Round x 24" L Body Diameter. Features: 5" Aluminized Steel Construction Free-Flowing Performance Muffler Adjustable Hanger To Cover 2001-2010 Models Uses Factory Mounting Locations For Hassle-Free Installation Fitment Note: Fits Crew Cab/Short Bed, Crew Cab Long Bed, Extended Cab/Short Bed, and Extended Cab/Long Bed. Not for use on Cab and Chassis. Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-04060NM ATLAS 5" Downpipe-Back No Muffler Race Exhaust System 28394 71.00 AFE 49-04060NM ATLAS 5" Downpipe-Back No Muffler Race Exhaust System
$ 595.5
The AFE 49-04060NM ATLAS 5" Downpipe-Back No Muffler Exhaust System for your 2001-2010 GM 6.6L Duramax features a 5" mandrel-bent aluminized steel tubing for maximum flow increased horsepower, increased torque and lower EGTs. This system uses high quality band clamps, OE-style bayonet hangers and includes an adjustable hanger clamp for a tight secure fitment. This unit uses all factory mounting locations this provides for a quick, hassle-free installation. This no-muffler exhaust system includes a muffler delete pipe for a more aggressive sound. ATLAS exhaust systems are the perfect combination of performance, fit and value. Limited 2-year warranty. Installation is a Snap: This ATLAS System Includes an extension pipe and an adjustable hanger for a perfect fit. This kit uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. Flow and Performance: This ATLAS exhaust system is constructed of 5"" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. OE Fitment: OE-style hangers with bayonet tip are used to maintain a stable pipe location during high vibration and high heat conditions. Features: 5" Aluminized Steel Construction "Straight Pipe" No Muffler Exhaust System Adjustable Hanger To Cover 2001-2010 Models Uses Factory Mounting Locations For Hassle-Free Installation Fitment Note: Fits Crew Cab/Short Bed, Crew Cab Long Bed, Extended Cab/Short Bed, and Extended Cab/Long Bed. Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-14017NM Large Bore HD 4" Down-Pipe Back No Muffler Exhaust 18059 64.00 AFE 49-14017NM Large Bore HD 4" Down-Pipe Back No Muffler Exhaust
$ 509.72
The LARGE Bore HD exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4" stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The system is available in a 4" down-pipe back without muffler. LARGE Bore HD exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: All systems use factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A muffler eliminator pipe is used for a true race-inspired sound and maximum flow. OE Fitment: OE-style hangers with bayonet tip are used to maintain a stable pipe location during high vibration and high heat conditions. Flow and Performance: LARGE Bore HD exhaust systems are constructed of 4" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 4" T409 Stainless Steel No Muffler, No Tip Down-Pipe Back OE-Style Flange No Bungs Limited 2-Year Warranty Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-44017 Mach Force XP 4" Down-Pipe Back Race Exhaust System 5588 65.00 AFE 49-44017 Mach Force XP 4" Down-Pipe Back Race Exhaust System
$ 659.34
The AFE 49-44017 Mach Force XP 4" Down-Pipe Back Race Exhaust System for your 2007.5-2010 GM 6.6L Duramax is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4" stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The system is available in a 4" down-pipe back with muffler and is finished off with a powder-coated black or polished tip. Mach FORCE XP exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: All systems use factory mounting locations providing stability and a hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A free-flowing 24" x 8" long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE Fitment: OE-style hangers with bayonet tip are used to maintain a stable pipe location during high vibration and high heat conditions. Flow and Performance: Mach FORCE XP exhaust systems are constructed of 4"" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Exhaust Tip: Finishing off the exhaust is a polished or powder-coated black 304 stainless steel exhaust tip. This tip features a drain port on the bottom to keep rust and corrosion away. A unique stainless steel laser-cut aFe Power logo plate is riveted on for an aggressive style. Features: Down-Pipe Back 4" T409 Stainless Steel Construction Stainless Steel Band Clamps Bayonet OE-Style Welded On Hangers Free Flowing Muffler Black Or Polished Exhaust Tip Exhaust Tip Finish Polished 49-44017-P Black 49-44017-B Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. Does not fit Cab and Chassis models.
AFE 49-44033 Mach Force XP 5" Downpipe-Back Race Exhaust System 9414 88.00 AFE 49-44033 Mach Force XP 5" Downpipe-Back Race Exhaust System
$ 895.75
The AFE 49-44033 Mach Force XP 5" Downpipe-Back Race Exhaust System for your 2007.5-2010 GM 6.6L Duramax is designed to increase horsepower, torque and overall performance while your truck is running down the track. This free flowing side exit exhaust system outflows the factory exhaust to give your truck the edge in competition. Constructed of durable 5" mandrel bent 409 stainless steel, this system uses bayonet style hangers and band clamps for a hassle free installation. This system comes complete with a free flowing muffler, all tubing, bayonet hangers, band clamps. For a finishing touch, you can choose between a black powdercoated or 304 stainless steel rolled, slash cut tip. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility. Features: 5" Downpipe-Back Exhaust T409 Stainless Steel Construction Race Exhaust - For Off-Road Competition Use Exhaust Tip Finish Polished 49-44033-P Black 49-44033-B Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. Not designed for use on Cab and Chassis models.
AFE 49-44033NM MACH Force XP 5" Downpipe-Back No Muffler Race Exhaust 19072 75.00 AFE 49-44033NM MACH Force XP 5" Downpipe-Back No Muffler Race Exhaust
$ 734.16
The AFE 49-44033NM MACH Force XP 5" Downpipe-Back No Muffler Race Exhaust for your 2007.5-2010 GM 6.6L Duramax is engineered to perform in the most extreme environments. Constructed from 5" mandrel bent 409 stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. This system is available in 5" turbo-back without muffler. All MACH Force exhaust systems come with all the necessary hardware for a clean and simple installation. Installation is a Snap: MACH Force XP exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A muffler delete-pipe is used for a true race-inspired sound and maximum flow. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: MACH Force XP exhaust systems are constructed of 5" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 5" Stainless Steel Construction No Muffler - "Straight Pipe System" Tip Not Included Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-44040 MACH Force XP 5" DPF-Back Exhaust System 19344 33.00 AFE 49-44040 MACH Force XP 5" DPF-Back Exhaust System
$ 444.6
The AFE MACH Force XP DPF-Back exhaust system is constructed from 5" mandrel-bent 409 stainless steel tubing and uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. MACH Force XP exhaust systems are the perfect combination of performance, fit and value. Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE-style flange and band clamps are used for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: This Mach FORCE XP exhaust system is constructed of 5"" mandrel-bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility. Not for use on Cab and Chassis models. Features: 5" Stainless Steel Construction DPF-Back Exhaust System Available With No Tip, Polished Or Black Exhaust Tip Exhaust Tip Options No Tip 49-44040 Polished Tip 49-44040-P Black Tip 49-44040-B
AFE 49-44059 Large Bore HD 4" Downpipe-Back Exhaust System 28372 82.00 AFE 49-44059 Large Bore HD 4" Downpipe-Back Exhaust System
$ 659.34
The AFE 49-44059 Large Bore HD 4" Downpipe-Back Exhaust System for your 2001-2010 GM 6.6L Duramax is engineered to perform in the most extreme environments. This system is constructed from 4" mandrel bent stainless steel tubing for maximum flow increased horsepower, increased torque and lower EGTs. This system uses high quality band clamps, OE-style bayonet hangers and includes an adjustable hanger clamp for a tight secure fitment. This system is includes a free-flowing 24" long muffler and includes your choice of a 6" diameter polished stainless steel or black coated clamp-on exhaust tip. Installation is a Snap: This Large Bore HD System Includes an extension pipe and an adjustable hanger for a perfect fit. This kit uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A free-flowing 24" long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: This Large Bore HD exhaust system is constructed of 4" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: Adjustable Hanger To Fit 2001-2010 Models 4" Mandrel-Bent Stainless Steel Construction Your Choice Of 6" Polished Or Black Exhaust Tip Free-Flowing 24" Muffler For Deep, Powerful Sound Uses Factory Mounting Locations For Hassle-Free Installation Fitment Note: Fits Crew Cab/Short Bed, Crew Cab Long Bed, Extended Cab/Short Bed, and Extended Cab/Long Bed Warning: On 2007.5-2010 models, this free-flowing race exhaust requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-44060 Large Bore HD 5" Downpipe-Back Exhaust System 28395 87.00 AFE 49-44060 Large Bore HD 5" Downpipe-Back Exhaust System
$ 895.75
The AFE 49-44060 Large Bore HD 5" Downpipe-Back Exhaust System for your 2001-2010 GM 6.6L Duramax is engineered to perform in the most extreme environments. This system is constructed from 5" mandrel bent stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. This system uses high quality band clamps, OE-style bayonet hangers and includes an adjustable hanger clamp for a tight secure fitment. This system is available with a free-flowing 24" long muffler and includes a 6" diameter polished stainless steel clamp-on tip with a laser-cut stainless steel aFe power plate for an aggressive style. Installation is a Snap: This Large Bore HD System Includes an extension pipe and an adjustable hanger for a perfect fit. This kit uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A free-flowing 24" long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: This Large Bore HD exhaust system is constructed of 5" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Exhaust Tip: Finishing off the exhaust is your choice of a 6" diameter polished stainless steel or black powdercoated clamp-on tip with a laser-cut stainless steel aFe power plate for an aggressive style. Features: 5" Stainless Steel Construction Adjustable Hangers To Fit 2001-2010 Models Free-Flowing 24" Muffler For Powerful Sound Uses Factory Mounting Locations For Hassle-Free Installation Fitment Note: Fits on Crew Cab/Short Bed, Crew Cab Long Bed, Extended Cab/Short Bed, and Extended Cab/Long Bed Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE MACH Force XP 409 Stainless Steel DPF-Back Exhaust System 49-44004 2083 46.00 AFE MACH Force XP 409 Stainless Steel DPF-Back Exhaust System 49-44004
$ 362.9
Features Include: Mandrel bent pipe, not compression bent, for 20% higher flow. Straight through wide open, high-flow mufflers, no baffles or chambers, less chance of resonation. (excluding DPF back systems) Tuned to specific vehicle applications for ultimate power when used in conjunction with AFE air intake filters. OEM style bayonet hangers with strong high-quality band clamps for better seal. 2-Year Warranty Systems Specs. 409 Stainless Steel DPF-back (Retains DPF w/re-gen cooling design) One-piece over axle 304 Tip IncludedNote: Not for use on Cab and Chassis models.
Banks Power Duramax LMM Single Monster Exhaust System 2137 60.00 Banks Power Duramax LMM Single Monster Exhaust System
2 5 1
$ 323.52
Monster Exhaust for Duramax LMM Meets OR BEATS STOCK COOLING and CUTS BACK-PRESSURE The Diesel Particulate Filter ( DPF) on Duramax LMMs reduces soot emissions through a process called regeneration. This can cause exhaust gas temps to exceed 1000 degrees at the DPF outlet! Unlike other aftermarket exhaust, Monster Exhaust with its Cool Cuff design cools temps as much or more than stock and dramatically cuts back-pressure, too! Don't get burned! - Only Banks Monster Exhaust cools as effectively as stock - Its slashes backpressure and nearly doubles flow, too - Competitors run much hotter than stock - And they have ugly tips! Monster exhaust is a stainless DPF- back system Constant-diameter 4" intermediate pipe and tailpipe Awesome-looking 6x5" polished-stainless rolled-edge tip Easy install Monster Exhaust is the safest choice! 5-Year Warranty
Magnaflow 17064 5" Black Series Filter-Back Exhaust System 33375 50.00 Magnaflow 17064 5" Black Series Filter-Back Exhaust System
$ 542.33
Upgrade your 2007.5-2019 GM 6.6L Duramax with the Magnaflow 17064 5" Black Series Filter-Back Exhaust System is Magnaflow's premier performance DPF series with a twist...featuring the same stainless construction but with the added protection and style of High Temp Satin Black Ceramic applied from tail pipe to tip. 1 Year warranty on coating. Features: Made In The USA! Filter-Back Exhaust System 4" Mandrel-Bent Stainless Steel Construction 300 Series Stainless Steel Black Coated Intercooled Tip 1-Year Warranty On Black Finish, Lifetime Construction Note: All Crew and Extended Cabs applies to GM 2500HD/3500HD Pickups. This kit is not intended for use on Cab and Chassis applications.
Magnaflow 17870 5" Pro Series Filter-Back Exhaust System 33634 25.00 Magnaflow 17870 5" Pro Series Filter-Back Exhaust System
$ 470.14
The Magnaflow 17870 5" Pro Series Filter-Back Exhaust System for your 2007.5-2019 GM 6.6L Duramax has a lifetime backed stainless steel construction, a muffler-less design and mirror polished welded intercooled tips. The best value system with a no hassle emissions legal design. Features: 5" Mandrel-Bent Tubing Lifetime Construction Warranty Polished Welded Intercooled Tip Single Passenger Side Rear Exit Note: All Crew and Extended Cab fitment applies to GM 2500HD/3500HD Pickups. This system is not designed for use on Cab and Chassis models.
Magnaflow 17976 4" Pro Series Filter-Back Exhaust System 33372 50.00 Magnaflow 17976 4" Pro Series Filter-Back Exhaust System
$ 464.7
The Magnaflow 17976 4" Pro Series Filter-Back Exhaust System for your 2007.5-2019 GM 6.6L Duramax has a lifetime backed stainless steel construction, a muffler-less design and mirror polished welded intercooled tips. This system provides the best value with a no hassle emissions legal design. Features: Made In The USA! Filter-Back Exhaust System 4" Mandrel-Bent Stainless Steel Construction 300 Series Stainless Steel Polished Intercooled Tip Lifetime Construction Warranty Note: All Crew and Extended Cabs applies to GM 2500HD/3500HD Pickups. This kit is not intended for use on Cab and Chassis applications.
Magnaflow 18943 4" Aluminized Pro Series Filter-Back Exhaust System 33373 50.00 Magnaflow 18943 4" Aluminized Pro Series Filter-Back Exhaust System
$ 290.89
Upgrade your 2007.5-2019 GM 6.6L Duramax with the Magnaflow 18943 4" Aluminized Pro Series Filter-Back Exhaust System. Magnaflow's Aluminized Pro Series features a 1-year warranty with a mufflerless design and a mirror finished, polished, welded intercooled tips. This is the best value system with a no hassle emissions legal design. Features: Made In The USA! Filter-Back Exhaust System 4" Mandrel-Bent Aluminized Steel Construction Mirror Polished Welded Intercooled Tips 1-Year Limited Warranty Note: All Crew and Extended Cabs applies to GM 2500HD/3500HD Pickups. This kit is not intended for use on Cab and Chassis applications.
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.