{{ product.name }}
See New Part # {{ product.superseded_product_sku }}
{{ determineProductPrice( product ) }}
{{ determineProductSalePrice( product ) }}
0
No Products
No Results
Showing Parts for —
{{ active_vehicle.name }}
Did you mean {{ response.didYouMean.query }}?
Steering & Front-End
The Bilstein 5100 Series Steering Damper 33-196619 for your 2011-2020 GM 2500HD/3500HD 4WD are designed specifically to help you maintain complete command of your truck at all times. A 5100 Series Steering Damper equipped vehicle offers a much more controlled feeling, allowing you to get the true feeling of your vehicle and what it is capable of. Utilizing our proven design, the steering damper is able to dampen minute movements in the steering and reduce steering vibrations that naturally occur especially in older vehicles. These dampers are the least expensive and most effective upgrade to extend the service life of any vehicle out on the road today.
33-196619 Features:
Bolt-On Replacement
Quantity Per Vehicle: 1
Reduced Steering Vibrations
Series: 5100 Series (Steering Damper)
Restore like new suspension performance with the Cognito Alloy Series Ball Joint 110-90142 in your 2001-2019 GM 2500HD/3500HD pickup. This specially designed ball joint is intended for use in your Cognito Upper Control Arms. Sold Individually
Features:
Works with Cognito Upper Control Arms
Sold Individually
Note: Cognito recommends replacing the ball joint mounting hardware when replacing the ball joints.
The Cognito 110-90248 Pitman and Idler Arm Support Kit for your 2011-2019 GM 2500HD/3500HD is for use on OEM Centerlink in OEM position, or OEM replacement centerlink in OEM position. Not for use with lift kits that use a dropped centerlink.
Features:
Removes Play In Steering
Fits OEM Center Link In OEM Position
The Cognito 110-90252 Heavy Duty Sway Bar End Links are an upgraded replacement for your stock height 2001-2019 GM 2500HD/3500HD pickup. Cognito's Heavy Duty End Links utilize a lower clevis system to reduce the angles on the link during suspension cycling. This helps reduce the stress that causes the factory links to break. Cognito End Links are slightly longer than factory to allow clearance with Cognito large diameter tie-rod upgrades. Features:7" Length Heavy-Duty ReplacementFor Stock and Leveled HeightLess Angle To Minimize Stress Premium Polyurethane Bushings Made In The USA Application Notes:For the following trucks stock or leveled height:2001-2019 1500HD/2500/2500HD/3500/3500HD 2WD/4WD2001-2013 GM SUVs 2500 2WD/4WD SUV 2003-2009 GM Hummer H2s and H2 SUTs Notes:Measurements are taken from mounting surface to mounting surface.Cognito Sway Bar End Links are for use with Cognito Suspension Systems.For use on other manufacturers lift kits, please measure to confirm fitment.
5
5
1
Upgrade the factory sway bar end links in your 2001-2019 GM 2500HD/3500HD with the Cognito 110-90253 Heavy Duty Sway Bar End Links. Cognito End Links are slightly longer than the factory versions to allow additional clearance with Cognito large diameter tie-rod upgrades. Because Cognito utilizes a lower clevis system, the Heavy Duty Sway Bar End Links see less stress on them during suspension cycling. As a result, they are much more durable than the factory links. Features:11" LengthFor Lifted TrucksHeavy-Duty Replacement Reduced Angle Minimizes Stress Premium Polyurethane Bushings Made In The USA!Application Notes:For the following trucks lifted 4" with a Congito Lift Kits:2001-2019 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD 2001-2013 GM 2500 SUVs 2WD/4WDNotes:Measurements are taken from mounting surface to mounting surface.Cognito Sway Bar End Links are for use with Cognito Suspension Systems.For use on other manufacturers lift kits, please measure to confirm fitment.
Upgrade the Sway Bar End Links on your lifted 2001-2019 GM 2500HD/3500HD with the Cognito 110-90254 Heavy Duty Sway Bar End Links. Cognito's lower clevis system helps reduce the angles on the link during suspension cycling. As a result, the stress on the End Link is drastically reduced providing a longer life. Cognito End Links have a slightly extended length allowing them to work with Cognito large diameter tie-rod upgrades. Features:12.75" Length For Lifted TrucksHeavy-Duty ReplacementLess Angle To Minimize Stress Premium Polyurethane Bushings Made In The USA Application Notes:For the following trucks lifted 6" with a Congito Lift Kits:2001-2019 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD2003-2009 GM Hummer H2s and H2 SUTs2001-2013 GM 2500 SUVs 2WD/4WD Notes:Measurements are taken from mounting surface to mounting surface.Cognito Sway Bar End Links are for use with Cognito Suspension Systems.For use on other manufacturers lift kits, please measure to confirm fitment.
Upgrade the Sway Bar End Links on your lifted 2001-2019 GM 2500HD/3500HD with the Cognito 110-90255 Heavy Duty Sway Bar End Links. To help reduce the stress that causes the factory links to break, Cognito's Heavy Duty End Links utilize a lower clevis system to reduce the angles on the link during suspension cycling. Cognito End Links are slightly longer than the factory versions to allow additional clearance with Cognito large diameter tie-rod upgrades.Features:14" LengthFor Lifted TrucksHeavy-Duty Replacement Reduced Angle Minimizes Stress Premium Polyurethane Bushings Made In The USA!Application Notes: For the following trucks lifted 7" with a Congito Lift Kits: 2001-2019 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD2000-2006 GM 1500 SUV 2WD/4WD1999-2006 GM 1500 Truck 4WD For the following trucks lifted 10" with a Congito Lift Kits:2007-2018 GM 1500 2WD/4WD Trucks and SUVNotes:Measurements are taken from mounting surface to mounting surface. Cognito Sway Bar End Links are for use with Cognito Suspension Systems. For use on other manufacturers lift kits, please measure to confirm fitment.
Replace the broken factory End Links in your 2001-2019 GM 1500/2500HD/3500HD with the Cognito 110-90256 Heavy Duty Sway Bar End Links. Cognito End Links are slightly longer than factory to allow clearance with Cognito large diameter tie-rod upgrades. Cognito's lower clevis system helps reduce the angles on the link during suspension cycling. As a result, the stress on the End Link is drastically reduced providing a longer life.Features:17" Length For Lifted TrucksHeavy-Duty ReplacementLess Angle To Minimize Stress Premium Polyurethane Bushings Made In The USA Application Notes:For the follow trucks lifted 10" with a Cognito Lift Kit:2001-2019 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD2003-2009 GM Hummer H2s and H2 SUTs2001-2013 GM 2500 SUVs 2WD/4WD2000-2006 GM 1500 SUVs 2WD/4WD1999-2006 GM 1500 Truck 2WD/4WDNotes:Measurements are taken from mounting surface to mounting surface.Cognito Sway Bar End Links are for use with Cognito Suspension Systems.For use on other manufacturers lift kits, please measure to confirm fitment.
Add strength to the steering in your 2011-2018 GM 2500HD/3500HD with the Cognito 110-90284 Alloy Series Tie Rod Kit. Designed as a heavy-duty upgrade for the stock components, the upgraded design incorporates an oversized ball and socket for increased durability. Features:Made In The USA! Increased StrengthMore Articulation Over Factory JointNotes: Because of the larger inner joint, longer sway bar end links may be necessary for stock or lifted vehicles to avoid contact with the sway bar while turning.
The Cognito 110-90298 Ball-Joint Style Upper Control Arms for your 2011-2019 GM 2500HD/3500HD 2WD/4WD are a direct replacement for the factory control arms. These are a great upgrade for those that are currently experiencing a bad ride from torsion bar keys or if you're trying to get more lift out of your lift kit.Features:Ball-Joint StyleDurable ConstructionNotes:This upper control arm is NOT designed to be a droop travel limiter.You must use Cognito specified shocks and lift kit to limit droop travel or else damage to this arm and other components of the suspension and drivetrain may occur.
The CST 4" Fabricated Lift Spindles CSS-C1-10 add height to the front of your 2011-2019 GM 2500HD/3500HD 2WD. These Lift Spindles retain the factory ride quality, factory handling, and provide maximum ground clearance with minimal track width changes. Features: Factory Ride and Handling CNC Machined Ball Joint Tapers High Quality Gloss Black Powdercoat Precision Laser Cut 1/4" Or Thicker Steel Kit Specifications and Notes:Stock Length OE shocks will work in front.Truck will sit high in front if only Spindles are used.Wheels must not have more than 4.75" backspacing Designed to fit 33" tires w/ 8"-9" wide wheels (4.75" max backspacing)
Put the CST CSS-C24-18 Dirt-Series Extreme Duty Tie Rods in your 2011-2019 GM 2500HD/3500HD and strengthen your steering system. These Dirt-Series Extreme Duty Tie Rods are 1" thicker than the stock tie rods. Manufactured with a T6061 aluminum center section and forged road ends for the ultimate in durability. The inner and outer joints have extra travel to prevent binding on lifted application. Works on stock height, or lifted applications that use the OE tie rods. Built with an oversized 3/4" threaded adjuster and pre-greased inner and outer ends to reduce maintenance costs, these are an excellent add-on to your CST Suspension Lift Kit. Designed in the USA, manufactured in Taiwan to ISO 9001/QS9000 and ISO/TS16949 standards. Sold as a pair. Features:For Stock and Lifted Applications (that use OE tie rods)Over-Sized 3/4" Thread Adjuster Greasable Outer Tie-Rod Ends Pre-Greased Inner Tie-Rod Ends
The CST Extended Travel Uni-Ball Upper Control Arms CSS-C2-10 extends travel on your 2011-2019 GM 2500HD/3500HD. Designed with replaceable urethane bushings and a 1" uni-ball for increased movement. Stainless steel taper pins.
Features:
Proudly Made In The USA
Works With CST and Stock Spindles
Closed Uni-Ball Cup Design For Protection Of Joint
Also Works With All CST 2500HD/3500HD Lift Options
Improve the steering feel and performance in your 2011-2015 GM 2500HD with the CST Steering Stabilizer CSR-2944. This performance steering stabilizer is designed for use with CST 0"-3" and 3"-6" Suspension Lifts.
Features:
For Use With O.E. Center Link
Works With CST 0"-3" and 3"-6" Suspension Lifts
Improve the steering feel and performance in your 2011-2016 GM 2500HD with the CST Steering Stabilizer CSR-2946. This performance steering stabilizer is designed for use with CST 6"-8", 8"-10 Sub-Frame Lift Kits.
Features:
Performance Steering Stabilizer
Fits CST 6"-8" and 8"-10" Lift Kits
The Fleece Performance LML Tie Rod Sleeves are a must have in the front end of your 2011-2015 GM 2500HD/3500HD Pickup that utilizes four-wheel drive. These support sleeves keep the weak factory tie rods from bending under the added stress of lifted torsion bars, increased horsepower and torque, and aggressive tires.
Features:
Strengthens Factory Tie Rods
Easy Installation
Note: Tie Rod shown is for display purposes only. Tie Rods are not included.
The Longhorn Fab Shop 200958 Steel Bolt-Together Tie Rod Sleeves are the easiest solution to reinforcing the tie rods on your 2001-2019 GM 6.6L Duramax. Want to install tie rod sleeves but dont have the time to take your tie rods apart, install the sleeves, and then take off work to have the truck aligned? Longhorn Fab Shop has your solution!
Everyone knows that tie rod sleeves on GM trucks are not strong enough to withstand the massive amounts of power the Duramax can produce. Even stock trucks can bend the tie rods when in four wheel drive. These bolt together tie rods are the answer you have been waiting for. They install in less than 10 minutes and do not require you to have the truck aligned!
Features:
Raw Steel Finish
Simple Installation
Bolt-Together Design
No Alignment Needed!
The Longhorn Fab Shop 200958-SS Stainless Bolt-Together Tie Rod Sleeves are the easiest solution to reinforcing the tie rods on your 2001-2019 GM 6.6L Duramax. Want to install tie rod sleeves but dont have the time to take your tie rods apart, install the sleeves, and then take off work to have the truck aligned? Longhorn Fab Shop has your solution!
Everyone knows that tie rod sleeves on GM trucks are not strong enough to withstand the massive amounts of power the Duramax can produce. Even stock trucks can bend the tie rods when in four wheel drive. These bolt together tie rods are the answer you have been waiting for. They install in less than 10 minutes and do not require you to have the truck aligned!
Features:
Stainless Steel
Simple Installation
Bolt-Together Design
No Alignment Needed!
The Merchant Automotive 10304 Stainless Steel Tie Rod Sleeves for your 2011-2016 GM 6.6L Duramax increase strength and rigidity in the tie rods in the front of your truck. Under extreme use tie rods can bend or even break, leaving you stuck. These easy to install sleeves thread onto the inner tie rod making it nearly impossible to break or bend. Made from high quality Stainless steel for long lasting good looks, but more importantly, easy to service. These tie rod sleeves must be loosened to make toe adjustments when performing an alignment and lesser quality sleeves made from cheap steel can rust and be very difficult to move.
Features:
Stainless Steel Construction
Reinforces Factory Tie Rods
The MOOG 515144 Wheel Bearing and Hub Assembly is a direct replacement for your 2011-2015 GM 3500HD 4WD Pickup. MOOG Hub Assemblies are performance proven and quality tested. Their application-specific design enhancements provide a longer life, smoother operation and optimum ABS performance.
Features:
Ensures Proper ABS Function and Quiet Operation
Quad-Lip Seal Provides Maximum Contamination Protection
Precision-Matched Components Deliver Smooth and Quiet Operation
Integral Raceway Provides Proper Clearances Between the Ball and Bearing Riding Surfaces
Improved Connection and Conductivity Of The ABS Signal Due To High Strength Polymer and Copper Wiring
Precision Engineering Ensures Easy Installation
Applications:
2011-2015 Chevrolet Silverado 3500HD - Front, DRW, 4WD
2011-2015 GMC Sierra 3500HD - Front, DRW, 4WD