Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Access B1020039 LoMax Hard Tri-Fold Tonneau Cover 33982 75.00 Access B1020039 LoMax Hard Tri-Fold Tonneau Cover
$ 953.7
Add styling and protect the cargo in the bed of your 2015-2018 GM Full Size Silverado/Sierra with the Access B1020039 LoMax Hard Tri-Fold Tonneau Cover. Designed for strength, security, style, and ease of use, the LOMAX Tri-Fold Cover is built from extremely durable aluminum panels that sit less than 1/2" above the truck bed for a clean, sleek look. Featuring a textured matte black finish, the LOMAX will perfectly complement your truck and OEM bed caps. Flexible rubber seals, vinyl coated hinges, and limited metal-on-metal contact all work together to reduce noise and vibration for a quiet ride. Sleek, Ultra Low Profile Design Sitting less than half an inch above the truck bed, the textured matte black finish of LOMAX Hard Tri-Fold Cover blends with your truck's OEM bed caps for a sharp, clean appearance. Easy To Operate To open, pull cord from either side to release latches; folding each panel automatically disengages additional locks. Then, secure LOMAX Hard Tri-Fold Cover with integrated storage clips. To close, release storage clips and use built-in handle to unfold panels. The tonneau automatically locks at ten points when closed, keeping your cargo protected and out of sight. Weathertight Seal The water-shedding design and waterproof, reinforced vinyl coated hinges route water away from the bed without gutters or drains. The hard folding tonneau overlaps the bed rails with a continuous seal along the entire length of the side rails, preventing elements from entering the truck bed. Strong, Yet Lightweight Extruded aluminum channels support the panels to hold up to 400 pounds of evenly distributed weight, while weighing approximately 50 pounds for a high strength-to-weight ratio. Integrated Storage Clips Sleek, retractable storage clips hold tonneau cover secure and vinyl capped rigid standoffs with rubber pads keep panels properly spaced in the folded position. No adjustments needed. Simple Installation Install rails with eight TIGHT BITE Clamps. Slide the hard tonneau cover forward to engage hooks, then lower into retainment brackets. Unfold each panel, truck bed cover locks automatically at ten points when closed. No drilling required. Easy To Remove and Install With LOMAX Cover open and storage clips secured, pull cord on front panel and slide it back to disengage hooks, then lift to remove. Reinstall by sliding tonneau cover forward to engage hooks, then lower into retainment brackets. This folding truck bed cover automatically locks in place. Features: Easy Operation Easy Installation Durable Aluminum Construction Low-Profile Hard Tri-Fold Cover Note: Image shown for display purposes is not of exact truck.
Access Literider Roll-Up Tonneau Cover (Increased Capacity) 5720 50.00 Access Literider Roll-Up Tonneau Cover (Increased Capacity)
$ 364.5
The Access® LiteRider® Roll-Up Cover is made with the same heavy duty materials as the original Access® Cover, but with a few component changes to make it even more affordable. The Access® LiteRider tonneau is a value priced alternative to our original Access® Roll-Up Cover. The tonneau pays for itself in the first year of ownership by boosting your fuel mileage by as much as 10%! Features: 6 Tight Bite clamps secure the cover to the truck EZ-Dial tension adjusters Quick Clip storage straps secure cover compactly behind the cab UV protected fabric material is stretch-resistant and flexible to -40°F 3-Year Limited Warranty Why Choose an Access® Brand Tonneau Cover?An Access® Brand Roll-Up Cover is made to last - that's why it is one of the highest-rated and most popular pickup bed covers sold today. Access® is THE ORIGINAL roll up tonneau cover, and its unique design has been emulated, but never duplicated. Since 1991, this product has earned a reputation for being flawless in terms of ease of installation, durability, sleek looks and price. You simply can't find a better roll-up tonneau cover! Once installed, it takes only moments to open the cover by simply releasing the latch. It's a cinch to close and lock the pickup bed cover by using the sturdy Velcro hook-and-loop sealing system. AutoLatch We have developed a patented system that automatically locks when closing the tonneau cover. Best of all, the smooth action of the pull cord gives you an easy release when opening. Slide Lock A testimony to our meticulous attention to detail, we offer additional locking protection. A simple sliding action that is pushed to lock and pulled to unlock. This lock works in conjunction with a locked tailgate to give you ultimate security. Tight Bite Clamps 6 sturdy aircraft grade aluminum clamps secure rails to the side of your truck. Specially cut "teeth" maintain a superior grip giving these clamps exceptional strength. EZ-Dial Our patented design automatically locks cover tension with the turn of a dial. This simple process does not require tools. Puts tension control in your hands giving you peace of mind and no headaches. Quick Clip Storage Powerful nylon straps with an ultra strong buckle secures your roll-up pickup bed cover compactly behind the cab. Making storage a cinch. Fabric Our covers feature a textured, double coated commercial grade reinforced vinyl. They remain flexible at -40, won't shrink in heat and resist fading against a hot relentless sun. Slantback Rear Design* Make sure it's the original roll-up cover with our exclusive Slantback Rear Design. *The Slantback Rear Design is a Registered U.S. Trademark of Agri-Cover, Inc.
Access Lorado Roll-Up Tonneau Cover (Low-Profile) 5838 50.00 Access Lorado Roll-Up Tonneau Cover (Low-Profile)
$ 490.45
The Access® Lorado® Tonneau Cover features a sleek, low-profile design. Just like our higher capacity covers, this custom fit, lower-profile cover will accommodate bed rails, under rail bed liners, tie downs, bed caps and tailgate protectors. The roll-up cover pays for itself in the first year of ownership by boosting your fuel mileage by as much as 10%! If you're looking for a high quality, durable low-profile pickup bed cover, the Access® Lorado® Roll-Up Cover is a great choice. Features: Low-profile angled rails provide a streamlined appearance 8 Tight Bite clamps secure cover to the truck bed (most short boxes receive 6 clamps) AutoLatch automatically locks when the cover is closed - simply pull to open XT-Dial tension adjusters feature a large, oversized grip Premium storage straps secure rolled up cover and prevent it from rubbing against the cab UV protected fabric material is stretch-resistant and flexible to -40°F Premium Cover Warranty Why Choose an Access® Brand Tonneau Cover?An Access® Brand Roll-Up Cover is made to last - that's why it is one of the highest-rated and most popular pickup bed covers sold today. Access® is THE ORIGINAL roll up tonneau cover, and its unique design has been emulated, but never duplicated. Since 1991, this product has earned a reputation for being flawless in terms of ease of installation, durability, sleek looks and price. You simply can't find a better roll-up tonneau cover! Once installed, it takes only moments to open the cover by simply releasing the latch. It's a cinch to close and lock the pickup bed cover by using the sturdy Velcro hook-and-loop sealing system. Low-Profile Angled Rails Our low angled side rails are engineered to guarantee you a lifetime of peels and seals. The high quality components make the Lorado bed cover rugged enough to handle any job. AutoLatch We have developed a patented system that automatically locks when closing the tonneau cover. Best of all, the smooth action of the pull cord gives you an easy release when opening. Slide Lock A testimony to our meticulous attention to detail, we offer additional locking protection. A simple sliding action that is pushed to lock and pulled to unlock. This lock works in conjunction with a locked tailgate to give you ultimate security. Tight Bite Clamps 8 sturdy aircraft grade aluminum clamps secure your rails to the side of your truck (most short boxes receive 6 clamps). Specially cut "teeth" maintain a superior grip giving these clamps exceptional strength. XT-Dial In our drive to make our designs better we took our patented EZ-Dial tension control system and gave it a large oversized grip. The easiest and most effective tension control system on the road just got better. Front Element Seal Forming a tight barrier between your truck and cover, the Lorado Roll-Up Cover offers Element Seal that gives you double protection when combined with our integrated fabric flap. A virtual dam is created at the front holding water at bay and keeping your cargo safe and dry. Premium Storage Sometimes subtle design improvements result in major consumer advantages. Building upon our popular Quick Clips, we have added a new cab guard design which not only secures the Lorado truck bed cover compactly, but also prevents it from rubbing against the cab. Slantback Rear Design* Make sure it's the original roll-up cover with our exclusive Slantback Rear Design. *The Slantback Rear Design is a Registered U.S. Trademark of Agri-Cover, Inc.
Access Original Roll-Up Tonneau Cover (Increased Capacity) 5744 50.00 Access Original Roll-Up Tonneau Cover (Increased Capacity)
$ 490.45
The first of its kind, the Access® Roll-Up Cover is the ORIGINAL and #1 selling roll-up tonneau in North America! This truck bed cover is compatible with bed rails, bed caps, tailgate protectors, as well as drop-in, under-the-rail and spray-on bed liners and installs quickly with a clamp-on design. The tonneau pays for itself in the first year of ownership by boosting your fuel mileage by as much as 10%! Get the added cargo protection you need and improve the appearance of your truck with the most trusted name in roll-up tonneau covers. Features: Engineered to operate in all four seasons AutoLatch automatically locks when the cover is closed - simply pull to open 8 Tight Bite clamps secure the cover to the truck (most short boxes receive 6 clamps) XT-Dial tension adjusters feature a large, oversized grip for adjusting cover tension Element Seal forms a tight weather seal along the front of the truck Premium storage straps secure rolled up cover and prevent it from rubbing against the cab UV protected fabric material is stretch-resistant and flexible to -40°F Premium Cover Warranty Why Choose an Access® Brand Tonneau Cover?An Access® Brand Roll-Up Cover is made to last - that's why it is one of the highest-rated and most popular pickup bed covers sold today. Access® is THE ORIGINAL roll up tonneau cover, and its unique design has been emulated, but never duplicated. Since 1991, this product has earned a reputation for being flawless in terms of ease of installation, durability, sleek looks and price. You simply can't find a better roll-up tonneau cover! Once installed, it takes only moments to open the cover by simply releasing the latch. It's a cinch to close and lock the pickup bed cover by using the sturdy Velcro hook-and-loop sealing system. Low-Profile Angled Rails Our low angled side rails are engineered to guarantee you a lifetime of peels and seals. The high quality components make the Lorado bed cover rugged enough to handle any job. AutoLatch We have developed a patented system that automatically locks when closing the tonneau cover. Best of all, the smooth action of the pull cord gives you an easy release when opening. Slide Lock A testimony to our meticulous attention to detail, we offer additional locking protection. A simple sliding action that is pushed to lock and pulled to unlock. This lock works in conjunction with a locked tailgate to give you ultimate security. Tight Bite Clamps 8 sturdy aircraft grade aluminum clamps secure your rails to the side of your truck (most short boxes receive 6 clamps). Specially cut "teeth" maintain a superior grip giving these clamps exceptional strength. XT-Dial In our drive to make our designs better we took our patented EZ-Dial tension control system and gave it a large oversized grip. The easiest and most effective tension control system on the road just got better. Front Element Seal Forming a tight barrier between your truck and cover, the Lorado Roll-Up Cover offers Element Seal that gives you double protection when combined with our integrated fabric flap. A virtual dam is created at the front holding water at bay and keeping your cargo safe and dry. Premium Storage Sometimes subtle design improvements result in major consumer advantages. Building upon our popular Quick Clips, we have added a new cab guard design which not only secures the Lorado truck bed cover compactly, but also prevents it from rubbing against the cab. Slantback Rear Design* Make sure it's the original roll-up cover with our exclusive Slantback Rear Design. *The Slantback Rear Design is a Registered U.S. Trademark of Agri-Cover, Inc.
Access TonnoSport Roll-Up Tonneau Cover (Low-Profile) 5814 50.00 Access TonnoSport Roll-Up Tonneau Cover (Low-Profile)
$ 309.75
The Access® TonnoSport Roll-Up Cover gives you a sleek, low-profile look at a great low price. When closed, this near flush mount tonneau cover sits a mere 1/2" above the truck box - virtually disappearing before your eyes from the side or rear profiles. The cover is lockable and rolls up out of the way for easy access to the truck bed. There is no need for removal when hauling larger items in the truck bed. The Access® TonnoSport Roll-Up Cover fits your lifestyle, your truck and your budget! Features: Attachment friendly - compatible with bed rails, bed caps, tailgate protectors, as well as drop-in under-the-rail and spray-on bed liners Quick clamp-on installation Lockable - protects your cargo Only 1/2" Above Truck Box Pays for itself in the first year of ownership by boosting your fuel mileage as much as 10%! No need to remove - complete bed usage when cover is open Tailgate stays fully operational - even when cover is closed UV protected fabric material is stretch-resistant and flexible to -40°F 3 Year Limited Warranty Why Choose an Access® Brand Tonneau Cover?An Access® Brand Roll-Up Cover is made to last - that's why it is one of the highest-rated and most popular pickup bed covers sold today. Access® is THE ORIGINAL roll up tonneau cover, and its unique design has been emulated, but never duplicated. Since 1991, this product has earned a reputation for being flawless in terms of ease of installation, durability, sleek looks and price. You simply can't find a better roll-up tonneau cover! Once installed, it takes only moments to open the cover by simply releasing the latch. It's a cinch to close and lock the pickup bed cover by using the sturdy Velcro hook-and-loop sealing system. When closed, this low-profile tonneau cover lies a mere 1/2" above the truck box - virtually disappearing before your eyes from the side or rear profiles. Trigger Latch This allows the tonneau to lock automatically when closed and release easily with one hand. Two Slide Locks This component features a simple sliding action that is pushed to lock and pulled to unlock, creating additional locking protection. Tight Bite Clamps Sturdy aircraft grade aluminum clamps secure rails to the side of your truck. Specially cut "teeth" maintain a superior grip, giving these clamps exceptional strength and the cover a nearly custom tonneau fit. Storage Strap A powerful nylon strap with an ultra strong buckle secures your roll-up cover compactly behind the cab. Makes storage a cinch. Velcro® Side Sealing System Equipped with a superior Velcro® hook and loop system that is incredibly functional. There is a continuous high-strength seal running the full length of the truck box keeping out wind, rain and dirt. It easily disengages when opening the cover, allowing for a simple one person operation. This practical design is ideal for all weather conditions. Fabric The Tonnosport Roll-Up fabric is double-coated, commercial grade, reinforced vinyl and is built to last even in extreme hot and cold climates. Three Year Limited Warranty Our exclusive warranty includes the entire cover, even the fabric. Velcro® is a registered trademark of the Velcro® companies. Note: The TonnoSport Roll-Up Cover features a textured pattern.
Access Vanish Roll-Up Tonneau Cover (Low-Profile) 19471 43.00 Access Vanish Roll-Up Tonneau Cover (Low-Profile)
$ 356.25
The Access Vanish cover is a perfect choice for truck owners who want the lowest profile design at a remarkably low price. Sleek, affordable and durable, the Access Vanish cover sits only 1/2" above the truck bed and comes with high quality, economical components. It will give your truck a smooth, streamlined look while providing you with fuel mileage savings and protection for your cargo. The Access Vanish Cover provides you a great roll-up cover at a low price. Features:Latching System The trigger latch allows for one finger release to open and automatically locks when the customer is closed. Slide Locks 2 patented slide locks offer added locked protection for the cover. Push to lock, pull to unlock. Tight Bite Clamps Installs in minutes. Specifically cut teeth maintain a superior grip and exceptional strength. Design allows for traditional S-hook tie down to fit around the clamp. Tension Adjustment The EZ-Dial sets cover tension with the turn of a dial. No tools required. Side Sealing System Reliable sealing system keeps out dirt,rain and snow. Creates a tighter fitting cover and a quieter ride. Covers seals on all four sides. Storage Wraps Convenient flexible straps with large hook opening allows for easy attachment.
BAK Industries BAKFlip CS Tonneau Cover & Rack System 16637 60.00 BAK Industries BAKFlip CS Tonneau Cover & Rack System
$ 1599.88
The BakFlip CS hard folding truck bed cover and sliding rack system is the absolute perfect product for contractors, sports enthusiast or anyone looking for a tonneau cover and a rack at the same time. Whether you're a plumber or a surfer, an electrician or a kayaker, the BakFlip CS is designed to give you the ultimate functionality and security of a great tonneau cover and an extremely well made rack. The rack system itself integrates into the BakFlip rails and can slide up and down with the simple twist of an included T-key. Locking the rack down after sliding it to any desired position is just as easy. The rack uprights easily slide off for time when you want a clean looking ride, or can simply slide all the way forward and be kept neatly behind your cab. The BakFlip tonneau cover provides ultimate security, but folds open just as easily whenever you need full access to your truck. The CS rack is designed to handle 500 lbs. of weight and the BakFlip can handle almost as much evenly distributed weight on top of it. Included in the BakFlip CS tonneau cover system are sliding tie downs for your rails and sliding load locks to grip ladders, lumber etc. Features: Integrated Tonneau and Rack Sliding Back/Rail System Works w/ BakBox Sliding Load Locks Sliding Tie Downs Dodge Application Note: The BAKFlip CS Tonneau Cover and Rack System is not compatible with trucks that have the Ram Box Bed Storage.
BAK Industries BAKFlip CS-F1 Tonneau Cover & Rack System 16651 80.00 BAK Industries BAKFlip CS-F1 Tonneau Cover & Rack System
$ 1769.88
The BakFlip CS-F1 hard folding truck bed cover and sliding rack system is the absolute perfect product for contractors, sports enthusiast or anyone looking for an impact resistant folding tonneau cover and a rack at the same time. Whether you're a plumber or a surfer, an electrician or a kayaker, the BakFlip CS-F1 is designed to provide the ultimate high-end functionality and security of a great tonneau cover and an extremely well made rack. The rack system itself integrates into the BakFlip rails and can slide up and down with the simple twist of an included T-key. Locking the rack down after sliding it to any desired position is just as easy. The rack uprights easily slide off for time when you want a clean looking ride, or can simply slide all the way forward and be kept neatly behind your cab. The BakFlip F1 tonneau cover provides ultimate security, impact resistance, refinement and good looks. It folds open easily whenever you need full access to your truck bed too. The CS rack is designed to handle 500 lbs. of weight while BakFlip F1 handles almost as much evenly distributed weight on top of it. Included in the BakFlip CS-F1 tonneau cover system are sliding tie downs for your rails and sliding load locks to grip ladders and lumber etc. Features: Integrated Tonneau and Rack Sliding Rack/Rail System Works w/ BakBox Sliding Load Locks Sliding Tie Downs Dodge Application Note:The BakFlip CS-F1 will not fit on models with Ram Box.
BAK Industries BAKFlip F1 Tonneau Cover 16623 60.00 BAK Industries BAKFlip F1 Tonneau Cover
$ 1039.88
The BakFlip F1 is the flagship member of the BakFlip tonneau cover family, and far and away the leader in the hard folding truck bed cover arena. The BakFlip F1 is crafted from the finest high end materials. The understructure of the BakFlip F1 tonneau cover is made from a solid, powder coated aluminum for unparalleled strength and rigidity. The top surface is made from a thick Fiberglass Reinforced Polymer (FRP), designed to withstand a real beating and severe temperatures from extreme heat to freezing cold. All components of the BakFlip F1 cover are top of the line. Even the rubber hinges and side seals are made from a proprietary scuff resistant EPDM synthetic rubber material, which will never break down and will outlast your truck. The features of the BakFlip F1, such as the latches under the heavy duty panels are encased with injection molded plastic and the tonneau cover is made to operate easily from either side of the truck. Every panel under the BakFlip F1 is secure and has an automatic slam latch system to ensure that as it is closed, the panels are locked down tight. The BakFlip F1 also leans completely over the 90 degree mark when it is completely opened, to ensure that it remains impervious to side wind gusts, doesn't block your third break-light and can withstand severe impact from shifting loads in your truck bed. The BakFlip F1 tonneau is backed by the best 3 year warranty in the business and is designed to work seamlessly with accessories like BAK Industries BakBox toolbox, ProCaps bed rail protectors, tie downs, bed liners, bed rails and our popular 500 lb. capacity rack, the BakFlip CS rack system. Features: Flush Hinge Design Folds Beyond 90 Degrees Heavy Duty Latches Superior Rail Design Technical Specifications: Panel exterior: Aluminum underside FRP Fiberglass top Panel core: EPS (insulated) 3.5 lb. density Panel frames: Aircraft grade aluminum / black powder coat Finish: Hair cell texture Thickness: 1/2 inch (OD) Hinge: Flush style corrosion proof EPDM rubber Weight rating: 500 LBS. - evenly distributed Install tools: 1 x 15mm wrench Maintenance: Wash normally with soap and water / 3M formula 303 UV protection. Warranty: 3 year - with lifetime warranty on all rubber hinges
BAK Industries BAKFlip Fibermax Tonneau Cover 16595 50.00 BAK Industries BAKFlip Fibermax Tonneau Cover
$ 919.88
The BakFlip FiberMax is essentially a cross between our popular BakFlip G2 tonneau cover and our flagship model, the BakFlip F1. The FiberMax, while lacking some of the refinement of the F1, makes use of all the features of the BakFlip G2, from its tough aluminum substructure, to its robust EPDM hinge design to it's functional and well built slam latch system. All features of the BakFlip FiberMax mirror those of the BakFlip G2. The only difference is that the top surface of the FiberMax is made from an impact resistant Fiberglass Reinforced Polymer (FRP), rather than aluminum. This difference appeals to people that live in areas that are subject to heavy snowfalls as well as hail. In addition, if you're the kind of person that is particularly heavy on your truck, the FiberMax will probably appeal to you. The BakFlip Fibermax is a hard folding tonneau cover that is most definitely a work horse. It has built in cab protection, is operable from either side of the truck, is equipped with slump latches under all panels and has a sleek, contemporary design. Every single last component of the BakFlip FiberMax is made in the USA. It is truly an awesome tonneau cover, that delivers everything you need, without breaking the bank. The BakFlip FiberMax is also designed to work with the BAKBOX, the CS rack system and allows full access to stake pockets. Features: Protects Cab and Allows 3rd Brake Light Visibility Rugged Impact Resistant Scuff Resistant Superior Rail Seals Works With Bed Rails
BAK Industries BAKFlip G2 Tonneau Cover 16568 60.00 BAK Industries BAKFlip G2 Tonneau Cover
1 5 1
$ 889.88
BakFlip G2 tonneau covers literally revolutionize what it means to have a hard folding tonneau cover on the back of your truck. For the first time ever, the patented features of the BakFlip G2 enable you to get the full benefit of a strong, durable tonneau cover and still have full access to your truck bed whenever you needed it. The BakFlip G2 tonneau cover is designed to flip out of the way for optimum use of your truck. The BakFlip G2 has changed the landscape of the tonneau cover arena forever. The BakFlip G2 tonneau cover has an abundance of cutting edge advantages which allow you to use your truck like a truck, without sacrificing valuable bed space. The aluminum panels of the BakFlip G2 tonneau cover are coated with tuff black enamel paint, baked on for a rugged and durable finish. Between the aluminum is a durable, insulated polystyrene core, making the BakFlip G2 insulated, and light-weight. The BakFlip G2 is built with aircraft technology and although the entire tonneau cover weighs only about 60 LBS, it is much stronger than you might imagine with a 400-lb capacity, No load of snow is any match for the BakFlip G2. The BakFlip G2 hard folding tonneau cover is operated in increments, so that even a small child can operate it. Features: Tough aluminum construction Automatically Latching Panels "No Profile" Sleek, Flush Look 400Lb Weight Capacity Water-Tight and Insulated Panels Superior Aerodynamics for Improved Mileage Simple Installation and Removal
BAK Industries BakFlip MX4 Tonneau Cover 29707 65.00 BAK Industries BakFlip MX4 Tonneau Cover
$ 969.88
The BAK Industries BakFlip MX4 Tonneau Cover features heavy-duty aluminum matte finish panels that offer superior UV and scratch resistance, and an enhanced premium density foam core. The MX4 is the upgrade to the G2 aluminum series, equipped with upgraded latch housing components, and an integrated tailgate seal that allows the cover to be closed with the tailgate in the closed or open position. This heavy-duty, all-season truck bed cover cover is designed to perform in the most extreme conditions. The MX4s resilient infrastructure is designed for everyday use, with upgraded components that provide enhanced resistance to the elements without compromising its sleek, low-profile look and feel. The MX4s solid and robust design is flush mount, and backed by an extended 3-year warranty. Features: Durable Aluminum Matte Finish No-Drill, Clamp-On Installation Sleek, Low-Profile Design Premium UV Resistance Made In The USA! 3-Year Warranty
BAK Industries Revolver X2 Tonneau Cover 30070 55.00 BAK Industries Revolver X2 Tonneau Cover
$ 969.88
The BAK Industries Revolver X2 Tonneau Cover features an exclusive automatic rotational locking rails that secure the cover the entire length of the bed on each side. This hard aluminum roll-up cover easily rolls up with one-handed operation and allows use of every inch of the truck bed without blocking your rear window. This cover does it all with unrivaled strength, security and style. Features: Patented Locking Rails Secure the Full Length of the Bed Easy to Use Automatic Slam Latch Operates from Either Side No Lifting with Easy One-Handed Rolling Design No Velcro or Stitching 100% Bed Access Tough Security Full Access to Stake Pocket Holes for Other Accessories Rear View Mirror Visibility Made in the USA 3-Year Warranty
Bestop EZ-Fold Soft Tonneau Cover 9243 40.00 Bestop EZ-Fold Soft Tonneau Cover
$ 325.99
The Bestop EZ Fold Tonneau is our cleverest tonneau cover for your pickup. It uses tri-fold technology, so there are no permanently mounted internal rails. Just unfold the EZ Fold, fasten the front and back clamps, and you're off and running. Undo the back clamps, and you can fold this to the back of your cab, so your truck remains a flexible work vehicle. Complete install and removal of this tonneau takes less than five minutes. Features: Durable leather grain textured vinyls is stretch and shrink resistant Reinforced corner construction for additional strength and stability Folds up compactly with lower profile hinge and rail designs Integrated buckle straps secure folded tonneau to cab rail Easy to install or removal, even in extreme weather Year Make/Model Part# 1988-1999 GM Silverado/Sierra Fleetside 6.5' Bed 16005-01 1999-2007 GM Silverado/Sierra 8' Bed (99 New Body Style) 16204-01 1999-2007 GM Silverado/Sierra 6.5' Bed (99 New Body Style) 16205-01 2007.5-2014 GM Silverado/Sierra 8' Bed (w/o Bed Mgmt System) 16210-01 2007.5-2014 GM Silverado/Sierra 6.5' Bed (w/o Bed Mgmt System) 16211-01 2015-2016 GM Silverado/Sierra 6.5' Bed 16217-01 2015-2016 GM Silverado/Sierra 8' Bed 16218-01 2010-2014 Dodge Ram 2500/3500 and 2015-2016 Ram 1500 6.3' Bed 16240-01 2010-2014 Dodge Ram 2500/3500 8' Bed 16242-01 2003-2009 Dodge Ram 2500/3500 6.3' Bed (w/o Tailgate Spoiler) 16238-01 2003-2009 Dodge Ram 2500/3500 6.3' Bed (with Tailgate Spoiler) 16239-01 1999-2016 Ford F-250/350 Super Duty 6.75' Bed 16140-01 1999-2016 Ford F-250/350 Super Duty 8' Bed 16135-01 2017 Ford F-250/350 Super Duty 6.8' Bed 16222-01 2017 Ford F-250/350 Super Duty 8' Bed 16223-01
Bestop Supertop 9252 85.00 Bestop Supertop
1 5 1
$ 789.99
The Bestop Supertop takes pickup truck bed coverage and storage to a whole new level. Built with the same core characteristics as the original Supertop for Jeep, Supertop for Truck provides high-quality durability, easy collapsibility and one-of-a-kind styling. This adaptable top will provide you with an effective truck top alternative. Features: Collapsible Design Removable Windows Easy, Bolt-On Installation Great For 5th Wheel and Bed-Mounted Hitches Year Make/Model Part# 1999-2016 GM Silverado/Sierra 6.5' Bed 76303-35 1999-2016 Chevy Silverado 8' Bed 76315-35 1999-2007 GMC Sierra 8' Bed 76315-35 2003-2016 Dodge Ram 6.5' Bed 76304-35 1994-2016 Dodge Ram 8' Bed 76317-35 1987-1997 Ford F-250/350 8' Bed 76315-35 1999-2016 Ford F-250/350 6.75' Bed 76307-35 1999-2016 Ford F-250/350 8' Bed 76317-35
Bestop ZipRail Tonneau Cover 9233 40.00 Bestop ZipRail Tonneau Cover
$ 219.99
The Bestop ZipRail uses the same technology as Bestop soft tops for fastening to the truck: the patented Belt Rail System. This not only ensures a tight, weatherproof fit, it also stays flexible in any weather, so your tonneau is functional on the coldest days. Features: Leather grain textured vinyl The proven BeltRail attachment system attaches the tonneau cover securely and quickly to the bed 30 minute no-drill installation The quick release tabs enable the tonneau cover to open and close in any weather Tough premium grade vinyl coated polyester fabric withstands any climate or weather, protects cargo Reduces drag to help improve fuel mileage Year Make/Model Part# 1988-1999 GM Silverado/Sierra Fleetside 6.5' Bed 18005-01 1988-1998 GM Silverado/Sierra 6.5' Bed (Sportside) 18006-01 1999-2007 GM Silverado/Sierra 8' Bed (99 New Body Style) 18204-01 1999-2007 GM Silverado/Sierra 6.5' Bed (99 New Body Style) 18205-01 1999-2005 GM Silverado/Sierra 6.5' Bed (Sportside) 18206-01 2007.5-2014 GM Silverado/Sierra 8' Bed (w/o Bed Mgmt System) 18210-01 2007.5-2014 GM Silverado/Sierra 6.5' Bed (w/o Bed Mgmt System) 18211-01 2015-2016 GM Silverado/Sierra 6.5' Bed 18217-01 2015-2016 GM Silverado/Sierra 8' Bed 18218-01 1980-1997 Ford F-250/350 8' Bed 18017-01 1999-2016 Ford F-250/350 Super Duty 6.75' Bed 18140-01 1999-2016 Ford F-250/350 Super Duty 8' Bed 18135-01 2006-2009 Dodge Ram 2500/3500 6.3' Bed w/ Tailgate Spoiler 18239-01 2003-2009 Dodge Ram 2500/3500 8' Bed w/o Tailgate Spoiler 18235-01 2003-2009 Dodge Ram 2500/3500 6.3' Bed w/o Tailgate Spoiler 18238-01 2010-2016 Dodge Ram 2500/3500 6.3' Bed 18240-01 1994-2002 Dodge Ram 6.5' Bed 18038-01 2009-2016 Dodge Ram 6.3' Bed 18240-01
WeatherTech 8HF020036 AlloyCover Hard Truck Bed Cover 41310 75.00 WeatherTech 8HF020036 AlloyCover Hard Truck Bed Cover
$ 1039.95
Get more versatility out of your 2015-2019 GM Silverado/Sierra 2500/3500 bed with the WeatherTech 8HF020036 AlloyCover. The WeatherTech AlloyCover is a low-profile hard bed cover featuring a tri-fold design, making it easy to install and remove on your truck. Paired with a locking tailgate, the AlloyCover has an AutoLatch II latching system that provides excellent security against unwanted access to your truck bed. The AlloyCover incorporates tough aluminum panels with an extruded aluminum frame that can support up to 400 pounds of evenly distributed weight, all while only weighing about 50 pounds! Protect the items in your truck's bed from the elements with the water-shedding design of WeatherTech's AlloyCover. The WeatherTech AlloyCover is made in America and comes backed by a 3 year warranty. Truck bed covers are proven to reduce aerodynamic drag and increase fuel economy! Features: American MadeAluminum Construction - Won't Rust3 Year WarrantyLow-Profile Tri-Fold DesignAutoLatch II Locking System
WeatherTech 8HF020055 AlloyCover Hard Truck Bed Cover 41322 67.00 WeatherTech 8HF020055 AlloyCover Hard Truck Bed Cover
$ 999.95
Keep the contents in the bed of your 2007.5-2014 GM Silverado/Sierra 2500/3500 secure from unwanted access with the WeatherTech 8HF020055 AlloyCover. The AlloyCover incorporates tough aluminum panels with an extruded aluminum frame that can support up to 400 pounds of evenly distributed weight, all while only weighing about 50 pounds! Truck bed covers are proven to reduce aerodynamic drag and increase fuel economy! Protect the items in your truck's bed from the elements with the water-shedding design of WeatherTech's AlloyCover. The WeatherTech AlloyCover is a low-profile hard bed cover featuring a tri-fold design, making it easy to install and remove on your truck. Paired with a locking tailgate, the AlloyCover has an AutoLatch II latching system that provides excellent security against unwanted access to your truck bed. The WeatherTech AlloyCover is made in America and comes backed by a 3 year warranty. Features: Aluminum Construction - Won't RustLow-Profile Tri-Fold DesignAmerican Made3 Year WarrantyAutoLatch II Locking System
WeatherTech 8HF020066 AlloyCover Hard Truck Bed Cover 41321 69.00 WeatherTech 8HF020066 AlloyCover Hard Truck Bed Cover
$ 1039.95
The WeatherTech 8HF020066 AlloyCover for your 2007.5-2014 GM Silverado/Sierra 2500/3500 is made in America and comes backed by a 3 year warranty. Protect the items in your truck's bed from the elements with the water-shedding design of WeatherTech's AlloyCover. The WeatherTech AlloyCover is a low-profile hard bed cover featuring a tri-fold design, making it easy to install and remove on your truck. Truck bed covers are proven to reduce aerodynamic drag and increase fuel economy! Paired with a locking tailgate, the AlloyCover has an AutoLatch II latching system that provides excellent security against unwanted access to your truck bed. The AlloyCover incorporates tough aluminum panels with an extruded aluminum frame that can support up to 400 pounds of evenly distributed weight, all while only weighing about 50 pounds! Protect the items in your truck's bed from the elements with the water-shedding design of WeatherTech's AlloyCover. The WeatherTech AlloyCover is made in America and comes backed by a 3 year warranty. Features: AutoLatch II Locking SystemLow-Profile Tri-Fold Design3 Year WarrantyAluminum Construction - Won't RustAmerican Made
WeatherTech 8RC2286 Roll Up Truck Bed Cover 41338 36.00 WeatherTech 8RC2286 Roll Up Truck Bed Cover
$ 519.95
Reduce aerodynamic drag from your 2007.5-2014 GM Silverado/Sierra 2500HD/3500HD by installing a WeatherTech 8RC2286 Roll Up Truck Bed Cover. WeatherTech Roll Up Truck Bed Covers come backed by a 5 year warranty and are proudly made in the USA! Installation of the WeatherTech Roll Up Bed Cover is made simple, no drilling or cutting is required! When hauling oversized cargo, the Roll Up Bed Cover can be stored completely out of the way with the built-in nylon straps. The WeatherTech Roll Up Truck Bed Cover only sits about 1" above the bed rails, giving your truck a sleek, low profile appearance. The textured, double-coated, commercial grade reinforced vinyl remains flexible in extreme temperatures and the aluminum black bars, bows, and rails make the Roll Up Bed Cover not only strong and durable, but easy to use, too! Truck bed covers are proven to reduce aerodynamic drag and increase fuel economy! Featuring the AutoLatch II automatic locking system, the WeatherTech Roll Up Truck Bed Cover provides excellent security to your truck bed's belongings when paired with a locking tailgate. WeatherTech created the Roll Up Truck Bed Cover as a custom-fit solution for individuals looking to get the most out of their truck bed. Features: 5 Year WarrantyDouble-Coated Commercial Grade Reinforced VinylLow-Profile Roll Up DesignBolt-on InstallationAutoLatch II Locking System