Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
Hellwig 25351 Load Pro Mounting Kit 34142 24.00 Hellwig 25351 Load Pro Mounting Kit
$ 172.35
The Hellwig 25351 Load Pro Mounting Kit is specially designed to work with Hellwig's Load Pro LP-25 and LP-35 Helper Springs. Each kit includes all the hardware needed to install your Load Pro Helper Springs (sold separately) and in most applications is easily installed with basic hand tools. Features: Installation Kit OnlyFor Hellwig Load Pro Helper SpringsApplications: 2004-2016 Dodge/Mercedes Sprinter 2500/3500 2WD/4WD Multi-Leaf ApplicationsNote: This is for the installation kit only. Please see the specific LP-25 and LP-35 kit for your vehicle to ensure that you are selecting the proper application.
Hellwig 2551 LP-25 Load Pro Helper Springs 18064 46.00 Hellwig 2551 LP-25 Load Pro Helper Springs
$ 210.22
Maximize load carrying capacity of the rear suspension in your 2004-2016 Sprinter Van with the Hellwig 2551 LP-25 Load Pro Helper Springs. Hellwig's Helper Springs set the standard for all other aftermarket helper springs. Featuring Progressive Spring Rate and Fulltime Spring Rate design, this spring is the workhorse of the Hellwig Spring line. With the Progressive design the vehicle must be loaded and its spring compressed to activate the Hellwig Spring, therefore as the vehicles load increases the Hellwig Helper Spring progressively increases its resistance to the load. In the Fulltime design the Hellwig Spring immediately reacts to the vehicles load, therefore compressing very little as load is applied to the vehicle.Manufactured with heat treated ASTM 5160 alloy spring steel these units increase your vehicles level load carrying capacity up to the manufacturers Gross Vehicle Weight Rating. Designed to install on full size pick-up trucks and vans. This simple bolt on design installs using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Set it and forget it. LP 25 is rated at 2500lbs level load carrying capacity, not exceed the vehicles Gross Vehicle Weight Rating. Installation kit required (not included).LP-25 Features:3-Leaf Stack Handles The Heaviest Loads2500 lbs. Level Load CapacityProgressive Rate Design Is Fully AdjustableDesign Can Handle Load 24/7 Tech Notes: Requires 25351 Installation Kit (sold separately)Unless noted, all sway bars are designed for factory exhaust.Applications: 2004-2016 Sprinter 2500/3500 Van 2WD/4WD (Multi-Leaf Application Only)
Hellwig 3551 LP-35 Load Pro Helper Springs 18065 55.00 Hellwig 3551 LP-35 Load Pro Helper Springs
$ 254.37
Maximize the capacity of the suspension in your 2004-2016 Sprinter Van with the Hellwig 3551 LP-35 Load Pro Helper Springs. The Hellwig Helper Spring set the standard for all other aftermarket helper springs. Featuring Progressive Spring Rate and Fulltime Spring Rate design, this spring is the workhorse of the Hellwig Spring line. With the Progressive design the vehicle must be loaded and its spring compressed to activate the Hellwig Spring, therefore as the vehicles load increases the Hellwig Helper Spring progressively increases its resistance to the load. In the Fulltime design the Hellwig Spring immediately reacts to the vehicles load, therefore compressing very little as load is applied to the vehicle.Manufactured with heat treated ASTM 5160 alloy spring steel these units increase your vehicles level load carrying capacity up to the manufacturers Gross Vehicle Weight Rating. Designed to install on full size pick-up trucks and vans, this unit requires mounting hardware to accommodate 2 1/2 or 3 wide leaf springs. When ordering be sure to identify the spring kit and the appropriate mounting hardware kit to complete the installation. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Set it and forget it. LP 35 is rated at 3500lbs level load carrying capacity, not exceed the vehicles Gross Vehicle Weight Rating. Install kit required. LP-35 Features:4-leaf stackHandles the heaviest loads3500 lbs. Level Load CapacityOffers the Maximum in Carrying CapacityRecommended for 3/4 Ton and 1 Ton ApplicationsFor Use On Multi-Leaf Application Only Tech Notes: Requires 25351 Installation Kit (sold separately)Unless noted, all sway bars are designed for the exhaust system.
Hellwig 7239 Rear Sway Bar 17998 29.00 Hellwig 7239 Rear Sway Bar
$ 333.33
Sway Bars are the easiest, most cost effective way to improve your vehicles cornering and handling performance. Most factory suspensions comprise handling performance for soft ride characteristics, Hellwig sway bars can help a lot. Not only is handling improved but tire life is extended by maintaining even pressure on all four corners of the vehicle in cornering situations. Made from hot-formed heat-treated 4140 chromoly steel with polyurethane bushings allows for major improvements in the way your vehicle handles. All kits are easy to install and include heavy gauge mounting hardware, specially formulated polyurethane bushings and easy to follow installation instructions. Kit includes Rear Sway Bar for stock height and hardware needed for install. Features and Benefits: Reduces body roll for greater vehicle control Distributes weight evenly Fast, easy bolt-on installation with simple hand tools High quality 4140 chromoly steel High tech polyurethane bushing Unless noted, all sway bars are designed for factory exhaust.
Hellwig 7251 Rear Sway Bar 17996 30.00 Hellwig 7251 Rear Sway Bar
$ 255.62
Sway Bars are the easiest, most cost effective way to improve your vehicles cornering and handling performance. Most factory suspensions comprise handling performance for soft ride characteristics, Hellwig sway bars can help a lot. Not only is handling improved but tire life is extended by maintaining even pressure on all four corners of the vehicle in cornering situations. Made from hot-formed heat-treated 4140 chromoly steel with polyurethane bushings allows for major improvements in the way your vehicle handles. All kits are easy to install and include heavy gauge mounting hardware, specially formulated polyurethane bushings and easy to follow installation instructions. Kit includes Rear Sway Bar for stock height and hardware needed for install. Features and Benefits: Reduces body roll for greater vehicle control Distributes weight evenly Fast, easy bolt-on installation with simple hand tools High quality 4140 chromoly steel High tech polyurethane bushing Application Note: 2008 Applications - Before ordering, verify distance between end link centers at 29.5". If 27.5" use 7254 Unless noted, all sway bars are designed for factory exhaust.
Hellwig 7253 Rear Sway Bar 17997 30.00 Hellwig 7253 Rear Sway Bar
$ 243.57
Sway Bars are the easiest, most cost effective way to improve your vehicles cornering and handling performance. Most factory suspensions comprise handling performance for soft ride characteristics, Hellwig sway bars can help a lot. Not only is handling improved but tire life is extended by maintaining even pressure on all four corners of the vehicle in cornering situations. Made from hot-formed heat-treated 4140 chromoly steel with polyurethane bushings allows for major improvements in the way your vehicle handles. All kits are easy to install and include heavy gauge mounting hardware, specially formulated polyurethane bushings and easy to follow installation instructions. Kit includes Rear Sway Bar for stock height and hardware needed for install. Features and Benefits: Reduces body roll for greater vehicle control Distributes weight evenly Fast, easy bolt-on installation with simple hand tools High quality 4140 chromoly steel High tech polyurethane bushing Unless noted, all sway bars are designed for factory exhaust.
Hellwig 7254 Rear Sway Bar 17995 27.00 Hellwig 7254 Rear Sway Bar
$ 232.75
The Hellwig 7254 Rear Sway Bar improves the cornering and handling performance in your 2008-2017 Sprinter 3500 2WD/4WD. Most factory suspensions comprise handling performance for soft ride characteristics, Hellwig sway bars can help a lot. Not only is handling improved but tire life is extended by maintaining even pressure on all four corners of the vehicle in cornering situations. Made from hot-formed heat-treated 4140 chromoly steel with polyurethane bushings allows for major improvements in the way your vehicle handles. All kits are easy to install and include heavy gauge mounting hardware, specially formulated polyurethane bushings and easy to follow installation instructions. Kit includes Rear Sway Bar for stock height and hardware needed for install. Features and Benefits: Reduces body roll for greater vehicle control Distributes weight evenly Fast, easy bolt-on installation with simple hand tools High quality 4140 chromoly steel High tech polyurethane bushing Application Note: 2008 Model Owners - Before ordering, verify distance between end link centers at 27.5" Designed for use with the factory exhaust system.
Pacbrake HP10147 Air Spring Kit 20187 40.00 Pacbrake HP10147 Air Spring Kit
$ 343.21
The Pacbrake HP10147 Air Spring Kit will provide capability and comfort on your 2007-2014 Sprinter 2500. When you haul heavy loads or pull a trailer, the rear springs can be pushed to the limitresulting in excessive bounce, sagging ride height, and an overall feeling of instability. It doesnt have to be this way. With the simple addition of a Pacbrake air suspension kit, you can inflate the air springs enough to support the load without overtaxing the suspension, resulting in a level stance, comfortable ride and confident handling. Pacbrake has been in the business of building heavy-duty products for OEMs and the aftermarket for 50 years now, so introducing just another air suspension simply wouldnt do. The air springs in Pacbrake air suspension systems are made from double convoluted two-ply rubber, and are the only air bags on the market with one-inch aluminum end caps and 18 support wires for maximum strength and durability. Features: 2-Ply Rubber 18 Support Wires 1" Reinforced Aluminum End Caps Application Notes: Fits 2WD Sprinter 2500 only. Requires drilling for installation Mounts inside frame rails
Timbren Front Suspension Enhancement System MBFSP35 15825 3.00 Timbren Front Suspension Enhancement System MBFSP35
$ 214.67
Upgrade your suspension with the Timbren Front Suspension Enhancement System MBFSP35. The softer ride quality of today's trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling. Timbren Suspension Enhancement Systems are mounted between the truck chassis and the axle. They work in conjunction with the existing suspension to improve the ride of the vehicle and to protect the springs against overloading, road shocks, bottoming out, sway and spring failure. Easiest to Use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to Maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension. Easiest to Install: There are no holes to drill for most applications, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. Features and Benefits: Improve Load Handling Eliminate Sag and Sway Easy Installation Lifetime Warranty Application: 2002-2009 Dodge Sprinter 2500 2002-2009 Dodge Sprinter 3500 2002-2017 Freightliner Sprinter 2500 2002-2017 Freightliner Sprinter 3500 2002-2017 Mercedes-Benz Sprinter 2500 2002-2017 Mercedes-Benz Sprinter 3500
Timbren Rear Suspension Enhancement System MBRSP25 15829 8.00 Timbren Rear Suspension Enhancement System MBRSP25
$ 317.24
Timbren Suspension Enhancement Systems (SES Kits) are designed to enhance the suspension of your vehicle. The softer ride quality of today's trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling. Timbren Suspension Enhancement Systems are mounted between the truck chassis and the axle. They work in conjunction with the existing suspension to improve the ride of the vehicle and to protect the springs against overloading, road shocks, bottoming out, sway and spring failure. Easiest to Use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to Maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension. Easiest to Install: There are no holes to drill for most applications, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. Features and Benefits: Improve Load Handling Eliminate Sag and Sway Easy Installation Lifetime Warranty 8600lb Capacity
Timbren Rear Suspension Enhancement System MBRSP25A 15830 5.00 Timbren Rear Suspension Enhancement System MBRSP25A
$ 317.24
Upgrade the performance of your 2007-2017 Sprinter 3500 suspension with the Timbren Rear Suspension Enhancement System MBRSP25A The softer ride quality of today's trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling. Timbren Suspension Enhancement Systems are mounted between the truck chassis and the axle. They work in conjunction with the existing suspension to improve the ride of the vehicle and to protect the springs against overloading, road shocks, bottoming out, sway and spring failure. Easiest to Use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to Maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension. Easiest to Install: There are no holes to drill for most applications, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. Features and Benefits: Improve Load Handling Eliminate Sag and Sway Easy Installation Lifetime Warranty Applications: 2007-2009 Dodge Sprinter 2500 2007-2017 Freightliner Sprinter 2500 2007-2017 Mercedes-Benz Sprinter 2500
Timbren Rear Suspension Enhancement System MBRSP35 15826 7.00 Timbren Rear Suspension Enhancement System MBRSP35
$ 317.24
Timbren Suspension Enhancement Systems (SES Kits) are designed to enhance the suspension of your vehicle. The softer ride quality of today's trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling. Timbren Suspension Enhancement Systems are mounted between the truck chassis and the axle. They work in conjunction with the existing suspension to improve the ride of the vehicle and to protect the springs against overloading, road shocks, bottoming out, sway and spring failure. Easiest to Use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to Maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension. Easiest to Install: There are no holes to drill for most applications, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. Features and Benefits: Improve Load Handling Eliminate Sag and Sway Easy Installation Lifetime Warranty 8600lb Capacity
Timbren Rear Suspension Enhancement System MBRSP35A 15827 6.00 Timbren Rear Suspension Enhancement System MBRSP35A
$ 317.24
Upgrade the suspension on your 2007-2017 Sprinter 3500 with the Timbren Rear Suspension Enhancement System MBRSP35A. The softer ride quality of today's trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling. Timbren Suspension Enhancement Systems are mounted between the truck chassis and the axle. They work in conjunction with the existing suspension to improve the ride of the vehicle and to protect the springs against overloading, road shocks, bottoming out, sway and spring failure. Easiest to Use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to Maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension. Easiest to Install: There are no holes to drill for most applications, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. Features and Benefits: Improve Load Handling Eliminate Sag and Sway Easy Installation Lifetime Warranty Applications: 2007-2009 Dodge Sprinter 3500 - For Motorhome Chassis 2007-2017 Freightliner Sprinter 3500 - For Motorhome Chassis 2007-2017 Mercedes-Benz Sprinter 3500 - For Motorhome Chassis
Timbren Rear Suspension Enhancement System MBRSP35B 15828 6.00 Timbren Rear Suspension Enhancement System MBRSP35B
$ 317.24
Upgrade the suspension in your 2007-2017 Sprinter 3500 with the Timbren Rear Suspension Enhancement System MBRSP35B. The softer ride quality of today's trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling. Timbren Suspension Enhancement Systems are mounted between the truck chassis and the axle. They work in conjunction with the existing suspension to improve the ride of the vehicle and to protect the springs against overloading, road shocks, bottoming out, sway and spring failure. Easiest to Use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to Maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension. Easiest to Install: There are no holes to drill for most applications, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. Features and Benefits: Improve Load Handling Eliminate Sag and Sway Easy Installation Lifetime Warranty Applications: 2007-2009 Dodge Sprinter 3500 - Fits Van, Cab and Chassis Models 2007-2017 Freightliner Sprinter 3500 - Fits Van, Cab and Chassis Models 2007-2017 Mercedes-Benz Sprinter 3500 - Fits Van, Cab and Chassis Models