Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

*The Clearance Rack*

New Product Filters!
AFE 49-02030 ATLAS 5" Turbo-Back Race Exhaust System 33183 93.00 AFE 49-02030 ATLAS 5" Turbo-Back Race Exhaust System
$ 613.16
Give your 2007.5-2012 Dodge Ram 6.7L Cummins a deep and throaty sound with the AFE 49-02030 ATLAS 5" Turbo-Back Race Exhaust System. Constructed from 5" aluminized steel tubing, this exhaust system features free-flowing mandrel-bent tubing for maximum flow and performance gains. Designed with ease of install in mind, each kit reinstalls on your truck using OE style bayonet hangers, and high quality band clamps for a secure, bolt-on installation. Simple Installation All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal High quality band clamps are included for a complete 360 degree sealing surface. OE Fit OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance This ATLAS exhaust system is constructed of 5" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. High Flow Aluminized Muffler This aluminized steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed of aluminized steel and uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize exhaust flow. You will see increased performance and improved throttle response over the factory exhaust. Also featuring a stamped aFe POWER logo for an aggressive style. Muffler Specifications: 5" Center Inlet /Outlet, 7" Round x 24" L Body Diameter. Features: 5" Turbo-Back Race Exhaust High-Flow Aluminized Performance Muffler Mandrel-Bent Aluminized Steel Construction Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. All Cabs and Beds applies to Ram 2500/3500 Pickups. This system is not intended for use on Cab and Chassis models.
AFE 49-02030NM ATLAS 5" Turbo-Back No Muffler Race Exhaust System 14613 82.00 AFE 49-02030NM ATLAS 5" Turbo-Back No Muffler Race Exhaust System
$ 535.95
The AFE 49-02030NM ATLAS 5" Turbo-Back No Muffler Race Exhaust System for your 2007.5-2012 Dodge 6.7L Cummins is engineered to perform in the most extreme environments. This race exhaust system is constructed from mandrel bent 5" aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. This system is available in 5" turbo-back without muffler. ATLAS exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A muffler eliminator-pipe is used for a true race-inspired sound and maximum flow. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: ATLAS exhaust systems are constructed of 5" mandrel bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 5" Aluminized Steel Turbo-Back Race Exhaust System Muffler Eliminator Pipe Included Bayonet OE Style / Welded On Hangers All Hardware Included Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. All Cabs and Beds applies to Ram 2500/3500 Pickups. This system is not intended for use on Cab and Chassis models.
AFE 49-03004 ATLAS 4" Downpipe-Back Race Exhaust System 11144 75.00 AFE 49-03004 ATLAS 4" Downpipe-Back Race Exhaust System
5 5 1
$ 466.83
The AFE 49-03004 ATLAS 4" Downpipe-Back Race Exhaust System for your 2008-2010 Ford 6.4L Powerstroke is engineered to perform in the most extreme environments. This race exhaust system is constructed from precision, mandrel bent 4 aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The 2-piece tailpipe and bayonet style hangers provide a hassle-free installation. To provide a leak-free seal, OE style band clamps are used that offer a 360º sealing area vs. cheap U-bolt clamps used in other systems. This system comes with your choice of a 12" free-flowing straight-through designed muffler or no-muffler configuration for the most sound. ATLAS exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style band clamps are used for a complete 360º sealing surface. Standard U-bolt clamps used by other systems only seal at the bottom and top of the tube allowing leak paths. Aggressive Sound: A free-flowing 12" wide muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: ATLAS exhaust systems are constructed of precision, mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 4" Downpipe-Back Race Exhaust System Aluminized Steel Construction System Options With Muffler 49-03004 Without Muffler 49-03004NM Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-03010 ATLAS 4" Aluminized Steel Race Pipe 11158 23.00 AFE 49-03010 ATLAS 4" Aluminized Steel Race Pipe
$ 265.73
The AFE 49-03010 ATLAS 4" Aluminized Steel Race Pipe for your 2008-2010 Ford 6.4L Powerstroke is engineered to perform in the most extreme environments. This system is constructed from precision, mandrel bent 4" aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGT's. To provide a leak-free seal, OE style band clamps and flanges are used that offer a 360 sealing area vs. cheap U-bolt clamps used in other systems. ATLAS exhaust pipes are the perfect combination of performance, fit and value. Installation is a Snap: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style band clamps and flanges are used for a complete 360 sealing surface. Standard U-bolt clamps used by other systems only seal at the bottom and top of the tube allowing leak paths. Flow and Performance: ATLAS exhaust pipes are constructed of precision, mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 4" Aluminized Steel Construction Off-Road Race Pipe Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-03093 ATLAS 5" Downpipe-Back Race Exhaust System 33195 85.00 AFE 49-03093 ATLAS 5" Downpipe-Back Race Exhaust System
$ 613.16
Maximize power and flow in your 2017-2019 Ford 6.7L Powerstroke with the AFE 49-03093 ATLAS 5" Downpipe-Back Race Exhaust System. Constructed from 5" mandrel-bent aluminized steel tubing, this kit uses high quality band clamps, and OE-style bayonet hangers for an easy, bolt-on installation Simple Installation: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are included for a complete 360 degree sealing surface. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance: This ATLAS exhaust system is constructed of 5" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. High Flow Aluminized Muffler: This aluminized steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed of aluminized steel and uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize exhaust flow. You will see increased performance and improved throttle response over the factory exhaust. Also featuring a stamped aFe POWER logo for an aggressive style. Muffler Specifications: 5" Center Inlet /Outlet, 7" Round x 24" L Body Diameter. Features: 5" Aluminized Steel Construction Free-Flowing Performance Muffler Uses Factory Mounting Locations For Hassle-Free Installation Fitments Notes: Extended Cab/Short Bed Extended Cab/Long Bed Crew Cab/Long Bed Crew Cab/Short Bed All Crew and Extended Cabs applies to Ford F-250/350 Pickups. This system is not intended for use on Cab and Chassis models. This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-04002 ATLAS 4" Downpipe-Back Race Exhaust System 11119 73.00 AFE 49-04002 ATLAS 4" Downpipe-Back Race Exhaust System
$ 412.96
The AFE 49-04002 ATLAS 4" Downpipe-Back Race Exhaust System for your 2007.5-2010 GM 6.6L Duramax is engineered to perform in the most extreme environments. This system is constructed from precision, mandrel bent 4 aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The 2-piece tailpipe and bayonet style hangers provide a hassle-free installation. To provide a leak-free seal, OE style band clamps are used that offer a 360º sealing area vs. cheap U-bolt clamps used in other systems. A 12" free-flowing straight-through designed muffler is used to produce a deep, powerful sound. Systems are available in 4 down pipe back with or without muffler. ATLAS exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style band clamps are used for a complete 360º sealing surface. Standard U-bolt clamps used by other systems only seal at the bottom and top of the tube allowing leak paths. Aggressive Sound: A free-flowing 12" wide muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: ATLAS exhaust systems are constructed of precision, mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: Downpipe-Back Race Exhaust 4" Mandrel Bent Aluminized Steel For Off-Road / Race Use Only System Options With Muffler 49-04002 Without Muffler 49-04002NM Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. Not for use on Cab and Chassis models.
AFE 49-04022 ATLAS 4" Aluminized Steel Race Pipe 11134 21.00 AFE 49-04022 ATLAS 4" Aluminized Steel Race Pipe
$ 265.73
The AFE 49-04022 ATLAS 4" Aluminized Steel Race Pipe for your 2011-2016 GM 6.6L Duramax is engineered to perform in the most extreme environments. This system is constructed from precision, mandrel bent 4" alumuinized steel tubing for maximum flow, increased horsepower, increased torque and lower EGT's. To provide a leak-free seal, OE style band clamps and flanges are used that offer a 360 sealing area vs. cheap U-bolt clamps used in other systems. ATLAS exhaust pipes are the perfect combination of performance, fit and value. Installation is a Snap: All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style band clamps and flanges are used for a complete 360 sealing surface. Standard U-bolt clamps used by other systems only seal at the bottom and top of the tube allowing leak paths. Flow and Performance: ATLAS exhaust pipes are constructed of precision, mandrel bent 4" aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: Off Road Race Pipe 4" Aluminized Steel Construction Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-04035-1 ATLAS 5" Downpipe-Back Race Exhaust System 33203 91.00 AFE 49-04035-1 ATLAS 5" Downpipe-Back Race Exhaust System
$ 613.16
Maximize power and flow in your 2011-2015 GM 6.6L Duramax LML with the AFE 49-04035-1 ATLAS 5" Downpipe-Back Race Exhaust System. Constructed from 5" mandrel-bent aluminized steel tubing, this kit uses high quality band clamps, and OE-style bayonet hangers for an easy, bolt-on installation. Simple Installation All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal High quality band clamps are included for a complete 360 degree sealing surface. OE Fit OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance This ATLAS exhaust system is constructed of 5" mandrel-bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. High Flow Aluminized Muffler This aluminized steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed of aluminized steel and uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize exhaust flow. You will see increased performance and improved throttle response over the factory exhaust. Also featuring a stamped aFe POWER logo for an aggressive style. Muffler Specifications: 5" Center Inlet /Outlet, 7" Round x 24" L Body Diameter. Features: 5" Aluminized Steel Construction Free-Flowing Performance Muffler Uses Factory Mounting Locations For Hassle-Free Installation Fitments Notes: Fits 144.2" to 167.7" wheelbases. This system is not intended for use on Cab and Chassis models. This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE 49-04053 ATLAS 4" Down-Pipe Back Race Exhaust System 26892 76.00 AFE 49-04053 ATLAS 4" Down-Pipe Back Race Exhaust System
$ 420.15
The AFE 49-04053 ATLAS 4" Down-Pipe Back Race Exhaust System for your 2015.5-2016 GM 6.6L Duramax is built and engineered to perform in the most extreme environments. This off-road race exhaust system is constructed from mandrel bent 4" aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. ATLAS exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A muffler delete-pipe is used for a true race-inspired sound and maximum flow. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: ATLAS exhaust systems are constructed of 4" mandrel bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 4" Aluminized Steel Construction Down-Pipe Back Race Exhaust With Muffler No Tip Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. Fitment Note: These kits will only fit models manufactured after July 2014 equipped with a flanged down pipe. Does not fit cab and chassis, fits Extended and Crew Cab Models.
AFE 49-42030-P MACH Force XP 5" Turbo-Back Exhaust System 14614 99.00 AFE 49-42030-P MACH Force XP 5" Turbo-Back Exhaust System
4 5 1
$ 873.5
The AFE49-42030-P MACH Force XP 5" Turbo-Back Race Exhaust System for your 07.5-12 Dodge 6.7L Cummins is a true 5" from the turbo-back, the MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 5" stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. This system is available in 5" turbo-back with muffler and polished tip. MACH Force XP exhaust systems are the perfect combination of performance, fit and value. Installation is a Snap: MACH Force XP exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Aggressive Sound: A free-flowing 24"" long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. Perfect Fit: OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. Flow and Performance: MACH Force XP exhaust systems are constructed of 5"" mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: 5" Turbo-Back Stainless Steel Race Exhaust System Stainless Steel Band Clamps Bayonet OE Style / Welded-On Hangers Free-Flow Muffler Direct Bolt-On Complete w/ Polished AFE Power Badge Logo Warning: This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning. All Cabs and Beds applies to Ram 2500/3500 Pickups. This system is not intended for use on Cab and Chassis models.
AFE 49-43093 Large Bore HD 5" Downpipe-Back Race Exhaust System 33862 70.00 AFE 49-43093 Large Bore HD 5" Downpipe-Back Race Exhaust System
$ 819.94
Give your 2017-2019 Ford 6.7L Powerstroke maximum exhaust flow with the AFE 49-43093 Large Bore HD 5" Downpipe-Back Race Exhaust System. Featuring a 5" stainless steel construction, this kit features a free-flowing performance muffler, along with high-quality band clamps and OE style bayonet hangers for an easy bolt-on installation. High Flow 409 Stainless Steel Muffler: This 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration, but maintain a smooth sound at idle. This muffler is constructed of brushed finished 409 stainless steel and uses a straight through perforated core with heat resistant packing to reduce backpressure and maximize exhaust flow. You will see increased performance and improved throttle response over the factory exhaust. Also featuring a stamped aFe POWER logo for an aggressive style. Muffler Specifications: 5" Center Inlet /Outlet, 8" Round x 24" L Body Diameter. OE Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. Flow and Performance: This Large Bore-HD exhaust system is constructed of 5" mandrel-bent 409 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Features: Downpipe-Back Exhaust System High-Flow Stainless Steel Muffler Mandrel-Bent For Maximum Flow 5" T409 Stainless Steel Construction Wheelbases: Extended Cab/Short Bed, 6.6 ft. Bed, 143.5 Wheelbase Crew Cab/Short Bed, 6.6 ft. Bed, 153.7 Wheelbase Extended Cab/Long Bed, 8 ft. Bed, 158.1 Wheelbase Crew Cab/Long Bed, 8 ft. Bed, 167.7 Wheelbase All Crew and Extended Cabs applies to Ford F-250/350 Pickups. This system is not intended for use on Cab and Chassis models. This free-flow race exhaust system requires the use of an aftermarket performance programmer with off-road tuning.
AFE Power DPF Race Exhaust Sensor Plugs 49-83022 6223 2.00 AFE Power DPF Race Exhaust Sensor Plugs  49-83022
$ 27.36
The DPF Race exhaust sensor plug kit contains all plugs necessary to plug the DPF (Diesel Particulate Filter) sensor bungs. This kit includes one M14 x 1.25m O2 plugs and three M12 x 1.25M temperature sensor plugs.
AFE Power DPF Race Exhaust Sensor Plugs 49-84017 6222 2.00 AFE Power DPF Race Exhaust Sensor Plugs 49-84017
$ 32.49
The DPF Race exhaust sensor plug kit contains all plugs necessary to plug the DPF (Diesel Particulate Filter) sensor bungs. This kit includes two M16 x 1.5m O2 plugs and two M14 x 1.5M temperature sensor plugs.
AFE Stage 2 Cold Air Intake System Type Cx 54-10612 269 19.00 AFE Stage 2 Cold Air Intake System Type Cx 54-10612
5 5 3
$ 283.85
Increases horsepower and torque. Maximizes airflow for better acceleration and responsiveness Improved performance results in greater fuel efficiency Installs in less than 60 minutes using factory mounting points No cutting or drilling to engine compartment is required Replaces OE air filter with high flow high performance 360 degree radial flow air filter Washable/reusable air filter with the deepest pleats in the industry is the largest possible in the space allowed Replaces factory air box with a heat-blocking shield that seals to the hood Limited lifetime warranty Product Specifications: Replacement Filter 24-91029 (72-91029 for Pro-Guard7 Media) Pre-Filter 28-1005X (1=Gold, 2=Red, 3=Black, 4=blue)
AFE Stage 2 Cold Air Intake System with Pro-GUARD 7 75-81342-0 2086 16.00 AFE Stage 2 Cold Air Intake System with Pro-GUARD 7 75-81342-0
$ 300.95
Pro-GUARD 7 high flow high efficiency filter media air filter Increases horsepower and torque. Maximizes airflow for better acceleration and responsiveness Improved performance results in greater fuel efficiency Installs in less than 60 minutes using factory mounting points No cutting or drilling to engine compartment is required Replaces OE air filter with high flow high efficiency 360 degree radial flow air filter Washable/reusable air filter with the deepest pleats in the industry is the largest possible in the space allowed Replaces factory air box with a heat-blocking shield that seals to the hood Limited lifetime warranty
AFE Stage 2 Cold Air Intake System with Pro-GUARD 7 Type EZ 75-10062 3728 12.00 AFE Stage 2 Cold Air Intake System with Pro-GUARD 7 Type EZ 75-10062
$ 303.3
Bring the power back to your 7.3L! This Stage 2 air intake system produced 15hp and 32lbs. x ft. of torque on the dyno and outflowed the factory intake system by 51%! This system utilizes a one-piece powder coated wrinkle black housing that mounts to the factory lower intake box, CAD designed tube for optimum air flow, large 4" diameter 360 degree PRO Guard 7 air filter for maximum filtration. This ia 100% bolt-on product that requires no cutting or drilling and this system comes with all hardware, couplers and components for an easy installation. Pro-GUARD 7 high flow high efficiency filter media air filter Increases horsepower and torque. Maximizes airflow for better acceleration and responsiveness Improved performance results in greater fuel efficiency Installs in less than 60 minutes using factory mounting points No cutting or drilling to engine compartment is required Replaces OE air filter with high flow high efficiency 360 degree radial flow air filter Washable/reusable air filter with the deepest pleats in the industry is the largest possible in the space allowed Replaces factory air box with a heat-blocking shield that seals to the hood Limited lifetime warranty Product Specifications: Airflow Increase 480 CFM vs 147 CFM for stock @1.5" Water Dyno Results 15 Hp Over Stock Replacement Filter 24-40035 (Standard) 24-91006 (Mega Cannon Top) 72-40035 (Pro-Guard7) Pre-filters 28-10011 (Gold) 28-10012 (Red) 28-10013 (Black) 28-10014 (Blue) Box Dimensions 17 X 9 X 11" Shipping Weight 12 pounds
AFE Stage 2 Pro Guard 7 Air Intake System 75-11922 6059 18.00 AFE Stage 2 Pro Guard 7 Air Intake System 75-11922
$ 348.3
aFe hits the market first with this brand new Stage 2 cold air intake for the new GM Duramax LML. This intake outflows the factory intake by 33%! Enclosed in a durable, one-piece 16 gauge, powder-coated heat shield; this air intake system features a huge washable/reusable inverted cone conical air filter with Pro Guard 7 oiled media for maximum protection. This intake system also features heat-insulating molded plastic tubes with a 3-angle adapter that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. The one-piece heat shield features two built-in grille side fresh air scoops and two rows of louvers that bring in additional outside air for a cooler, denser air intake charge. This heat-shield requires little or no assembly and utilizes factory mounting points for easy, no-cutting or drilling installation. The filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.
Anzo 85101X Fog Light Mounting Clamps 19207 1.00 Anzo 85101X Fog Light Mounting Clamps
$ 15.59
The Anzo 85101X Fog Light Mounting Clamps allows you to mount your lights easily to roll cages, tube bumpers, grille guards and more. Simply select the clamp size for the round bar or tube you'll be mounting your lights on. Sold as a pair. Features: Universal Bar Mount Design Multiple Sizes Available
Anzo 861146 10W Rechargeable LED Work Light 26248 5.00 Anzo 861146 10W Rechargeable LED Work Light
$ 22.49
The Anzo 861146 10W Rechargeable LED Work Light is at home on the job site, out on the trail, in the shop, or anywhere else you can think of. This easy to use light features a weather resistant, maintenance free design that provides up to 8 hours of light on just a 4-hour charge! The single 10 watt LED provides 800 lumens in a flood light pattern, to really light the area you're working in. Comes complete with a detachable, light-weight, adjustable base. Features: 800 Lumens Single 10W LED3" x 4" Flood Light8 Hour Run Time - 4 Hour Charge
ATS 3109012000 Auxiliary Transmission Cooler Thermostat 20864 1.00 ATS 3109012000 Auxiliary Transmission Cooler Thermostat
$ 60.53
The ATS 3109012000 Auxiliary Transmission Cooler T-stat helps keep your transmission running at optimal temperatures when running an aftermarket transmission cooler. Features: For 1/2" Lines Works With ATS Trans. Cooler