Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Heat Shields

New Product Filters!
Al's Liner HNR Heat and Noise Reducer 11028 35.00 Al's Liner HNR Heat and Noise Reducer
$ 62.44
Al's HNR, is proprietary blend of latex synthetic polymers. It contains acrylic, PVA and vinyl styrene and reinforced with ceramic micro spheres that provide incredible insulation, heat reflection and sound deadening properties. HNR can withstand up to 500F and reflects exterior temperatures by 45F or more. HNR can be applied to virtually any substrate with minimal prep, works just like latex paint. Excellent for interior automotive applications of all types! Al's HNR keeps your ride cool in the summer and warm in the winter. Also keep your RV, Box Trailer and Campers insulated by applying HNR to the roof, walls and floor. HNR can even be used for commercial and residential applications to cut energy costs. Developed from recycled materials, Al's is creating energy reducing coatings that not only produce a comfortable atmosphere in other wise uncontrollable conditions but add to the value and lifespan of your cars, trucks, boats, RVs and much more.Al's HNR can be applied with a brush, roller or spray guns including the Al's Texture/Spray Gun, HVLP with 3mm spray nozzle and undercoating guns.For the ultimate interior heat reducer and sound deadener or undercoating, apply the recommended base coat of Al's HNR and top coat with Al's Liner, the results will amaze you at a price that can't be beat.Clean up is simple, wash all application equipment and clean up any overspray or spill areas with soap and water. *This item must ship ground.
DEI 010236 ONYX Series Starter Shield 28510 1.00 DEI 010236 ONYX Series Starter Shield
$ 61.46
The DEI 010236 ONYX Series Starter Shield provides reliable heat protection for starters under severe duty or extreme heat. Starters exposed to heat soak often malfunction or have problems starting reliably. DEIs next generation ONYX Series Starter Shield provides the highest level of thermal protection to prevent starter malfunction due to heat soak. The ONYX Series Starter Shield combines two technologically advanced textiles into a dual layer for maximum thermal control. The outer layer is made from heat treated glass fiber bonded with molten aluminum then formed into a tight weave for added strength and durability. The inner layer is made of a specially treated, high temperature resistant fabric (89% silica). Combined, these materials protect the starter up to 1350F of direct heat. The ONYX Series shield has a rich, black finish and is sized 7 width by 24 length. The length can be trimmed to size for added convenience and fastens with a hook and loop fastening system that makes it easy to install without the trouble of removing the starter. Multi-purpose in design and fit, this shield also can be used to wrap most master cylinders, distributors, fuel pumps and many other components. Features: Fastens With Hook and Loop Fastener Universal Size - 7" Wide x 24" Length Starter Removal Not Requires For Installation Also Fits Master Cylinders, Fuel Pumps and Other Components
DEI 010458 Heat Shroud Gold 33498 1.00 DEI 010458 Heat Shroud Gold
$ 36.68
Protect hoses, wiring, and other components from heat with the DEI 010458 Heat Shroud Gold. After multiple years of development and testing in grueling environments like the Trans-Am race series, DEI's Gold line and hose protection is proven to keep vital components cool and protected. Manufactured from DEI's high-temp metalized polymide lamination, bonded to a robust 20oz heat treated glass fiber base material. The DEI line of gold sleeving will protect and keep components cool in the most demanding applications. Heat Shroud Gold is able to reflect direct heat up to 800 degrees Fahrenheit. For easy installation, the Heat Shroud Gold has a convenient hook and loop closure with open edges. This eliminates the need to remove the wires, cables, or hoses, all you need to do is simply wrap it around whatever needs protection. Features: Lock Weave Pattern 20oz. Heat Treated Base Glass Metalized Polyimide Lamination High Temperature Hook and Loop Seam Tested To FSTM 191.5100 Standards Tested To ASTM D11117 Standards Fits Hoses and Lines 1/2" To 1-1/4" x 3' Long
DEI 010486 Cool Cover Gold Intake Tube Cover Kit 33499 1.00 DEI 010486 Cool Cover Gold Intake Tube Cover Kit
$ 62.66
Protect your intake tube from hot underhood temperatures with the DEI 010486 Cool Cover Gold. Designed specially for your intake tube, the Cool Cover Gold is made with a convenient hook and loop fastener closure that along the open edges so all you need to do is simply wrap it around the pipe for heat protection. After multiple years of development and testing in grueling environments like the Trans-Am race series, DEI's Cool Cover Gold is proven to keep the heat off your intake tube. Manufactured from DEI's high-temp metalized polymide lamination, bonded to a robust 20oz heat treated glass fiber base material. The DEI line of gold sleeving will protect and keep components cool in the most demanding applications. Heat Shroud Gold is able to reflect direct heat up to 800 degrees Fahrenheit. Features: 28" Long Lock Weave Pattern 20oz. Heat Treated Base Glass Metalized Polyimide Lamination Fits Intake Tubes 3"-4" In Diameter High Temperature Hook and Loop Seam Tested To FSTM 191.5100 Standards Tested To ASTM D11117 Standards
DEI 010496 ONYX Series Pipe Shield 29646 1.00 DEI 010496 ONYX Series Pipe Shield
$ 36.66
The DEI 010496 ONYX Series Pipe Shield is the next generation of heat protection performance. Using a combination of advanced textiles, DEI developed a flexible heat shield solution that looks great and outperforms other conventional heat shields available today. This enhanced performance starts by joining two durable materials together forming a dual-layer design. The outer layer is made from heat-treated glass fiber that is bonded with molten aluminum and then formed into a tight weave for durability and strength. The inside material is made of a specially treated, high temperature resistant fabric (89% silica) designed to withstand some serious exhaust heat. The outer edge is finished off with a surge stitch for durability. All hardware is stainless steel. The result is a product with very good thermal performance up to 1350F, with an eye catching rich black finish. This proprietary textile technology combined with DEIs unique shield standoff bracket design provides the maximum potential for cooling and heat dissipation. In addition to external applications protecting legs and boots, Flexible Pipe Shields can also be used as a barrier between the exhaust and plastic bodywork, suspension components, or electrical harnesses. They will fit many applications and because the shield remains flexible, it will fit most pipe diameters. Features: More Effective Than Traditional Metal Heat Shields Capable Of Handling High Temperature Exposure Up To 1350F Protects Boots, Legs and Components Against Heat In Motorcycle Applications Made In The USA! Specifications: Material: Dual-Ply Aluminum Impregnated Glass/Woven Silica Construction Temperature Rating: 1350F Continuous, 2000F Intermittent Size: 4" x 8" Color: Black
DEI 010516 Form-A-Shield (14 SQ. FT.) 32255 6.00 DEI 010516 Form-A-Shield (14 SQ. FT.)
$ 135.39
Protect sensitive components and reduce radiant heat with the DEI 010516 Form-A-Shield (14 SQ. FT.). Made from 10mm dimpled aluminum with a 1/4" high temp basalt insulation, this form-fitting design molds easily to cast exhaust manifolds, pipes, muffler, and more. The Form-A-Shield can be applied directly to hot surfaces and can withstand direct temps to +1400 F. Excellent to use as a heat barrier for transmissions near hot exhausts, this shield provides outstanding performance in reflecting and blocking heat. Installation is easy with hi-temp adhesive, stainless locking ties, or it can be mechanically fastened. Features: 42" x 48" Sheet Flexible, Form-Fitting Design Withstands Temps To +1400 F Made In The USA Note: Includes shield only. Turbo, manifold, and straps are not included. Picture shown for display purposes only.Part Number 010516 replaces old part number 050516.
DEI 010517 Form-A-Shield (7 SQ. FT.) 32256 3.00 DEI 010517 Form-A-Shield (7 SQ. FT.)
$ 70.04
Protect sensitive components and reduce radiant heat with the DEI 010517 Form-A-Shield (7 SQ. FT.). Made from 10mm dimpled aluminum with a 1/4" high temp basalt insulation, this form-fitting design molds easily to cast exhaust manifolds, pipes, muffler, and more. The Form-A-Shield can be applied directly to hot surfaces and can withstand direct temps to +1400 F. Excellent to use as a heat barrier for transmissions near hot exhausts, this shield provides outstanding performance in reflecting and blocking heat. Installation is easy with hi-temp adhesive, stainless locking ties, or it can be mechanically fastened. Features: 21" x 48" Sheet Flexible, Form-Fitting Design Withstands Temps To +1400 F Made In The USA Note: Includes shield only. Turbo, manifold, and straps are not included. Picture shown for display purposes only.Part Number 010517 replaces old part number 050517.
DEI 011002 Form-A-Barrier 34205 1.00 DEI 011002 Form-A-Barrier
$ 15.48
The DEI 011002 Form-A-Barrier Heat Barrier gives you an option for excellent thermal protection up to 1300 F with a minimal gap of 1 inch to a heat source. The Form-A-Barrier can be bent by hand to conform to odd shapes. Mechanically fasten with pins, screws, or bolts. Resistant to most automotive chemicals. Multiple applications include firewalls, interiors, engines and many other areas. 12" x 12" square, sold Individually.Features:Easily Formed Reflective Material On Both Sides Protection Up To 1300 F(1) 12" x 12" Square
DEI Cell Saver - Battery Insulation Kit 010480 12014 1.00 DEI Cell Saver - Battery Insulation Kit 010480
$ 17.98
Batteries are very susceptible to heat and vibration that could cause premature failure and hazardous leaks. Cell Saver is very capable of damping vibration and will absorb and neutralize any damaging leaky battery acids. Cell Saver is easy to install and excess material can be trimmed to accommodate batteries of most sizes and shapes. Features: Protects batteries from harmful radiant heat Material withstands up to 2000F radiant heat Traps and neutralizes harmful battery acid Protects environment and your vehicle Completely safe to handle before and during installation Provides clean finished look with easy installation Kit Includes: 40 long x 7 insulation material 12 x 7 treated base mat Edge sealing tape
DEI Cool Cover Air Tube Cover Kit 010417 12017 1.00 DEI Cool Cover Air Tube Cover Kit 010417
$ 53.31
Cool Cover is designed to prevent air tubes from becoming heat sinks. Made of heat treated glass fiber with a reflective coating, Cool Cover will reflect radiant heat from air tubes and promotes a cooler, denser, more powerful air charge. With a unique full length hook and loop closure design, Cool Cover can be removed in seconds without the need of any hand tools! Reflects heat from air tubes Promotes cooler air charge for added power Installs and removes in seconds for show or go Fits up to 4-1/2 diameter tubing Includes: 36 x 14 insulation material 2 x 24 strip of heat reflective sealing tape
DEI Floor & Tunnel Shield 12038 5.00 DEI Floor & Tunnel Shield
$ 8.78
Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor and Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor and Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well. Constructed with an embossed 10 mil aluminum face bonded to 1/8 composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor and Tunnel Shield II withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16 thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor and Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound. Floor and Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations anywhere to reflect damaging heat. Features: Excellent heat and sound barrier Wind and water will not affect adhesive Minimum clearance required, only 3/16 thick Easily shape, trim, peel and stick Aggressive self-adhesive backing holds past 450°F Withstands 1750°F direct continuous heat Use to shield and reflect unwanted heat Multiple uses Sticks to fiberglass
DEI Oil Filter Heat Shields 50018 0.50 DEI Oil Filter Heat Shields
$ 5.72
Wrap the oil filter on your high performance vehicle in a DEI Oil Filter Heat Shield to help block heat away from the filter and reduce oil temperatures. Oil filters are usually tucked tight to the oil pan and engine block which can cause them to soak in a lot of heat. DEI's Heat Shields effectively block radiant heat that could potentially cause thermal breakdown which degrades the additives in your oil, making it less effective at protecting your engine. The peel and stick design makes these filter shields easy to install and can be trimmed to fit virtually all oil filters. Available in either 2.5"-3.5" x 3" or 3.5"-4.5" x 4" sizes, each pack contains 3 shields.Features:Keeps Oil Cool3 Shields Per PackPeel and Stick InstallationReduces Filter Heat Soak
DEI Titanium Pipe Shield - Exhaust Heat Shield 25465 2.00 DEI Titanium Pipe Shield - Exhaust Heat Shield
$ 29.23
The DEI Titanium Pipe Shield is designed to help you protect your underhood components from extreme temperatures. DEIs Titanium Pipe Shield combines the high heat tolerance of DEIs proprietary LR fiber technology with a unique rivet-based clamp shield design to improve heat dissipation and cooling. Glass fiber shields can begin to fail at 900F with the Mylar outer material cracking and flaking off. DEIs Titanium Pipe Shield provides heat protection up to 1350F. LR fiber technology is a two-ply material. The outer layer is made from pulverized and stranded lava rock into a proprietary tightly woven weave for durability and strength. The inside material is made of a special high temperature resistant fabric (89% silica) designed to withstand 350 degrees more heat than glass fiber. This proprietary fiber technology combined with DEIs unique shield standoff bracket design provides an air gap between the shield and pipe that together provides the maximum potential for cooling and heat dissipation. With the strategic placement of DEIs Titanium Pipe Shield near transmissions, brake lines, floorboards, body panels, diesel exhaust stacks or motorcycle pipes, radiant heat can be controlled for maximum protection and performance. Other uses include isolated areas such as sections of the exhaust pipe after the collector, an area that can heat transmission fluid, or along the path of an exhaust system in proximity of gas tanks, differentials and rear facias. The shield is designed for multiple automotive applications as well as marine, powersports, diesel and industrial applications where heat dissipation and thermal control is needed. Features: Capable of handling high temperature exposure up to 1350 F Protects heat sensitive components, hoses, lines and electrical wiring Easy to install with unique rivet-based pipe standoff brackets and pipe clamps Reduces heat from entering vehicle when placed on exhaust pipes Simple to re-position Part #'s Available 010450 - 6" W x 1 Ft. 010451 - 6" W x 2 Ft. 010452 - 6" W x 3 Ft. 010453 - 4" W x 8" 010454 - 4" W x 12"
DEI Versa-Shield 010402 12016 1.00 DEI Versa-Shield 010402
$ 24.15
Versa-Shield was designed to protect starters from potential failure caused by under hood heat soak conditions. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier, Versa-Shield is capable of reflecting radiant heat up to 2000F. Simply wrap desired component with Versa-Shield and trim excess material. Edges attach to itself using a hook and loop edge closure design. In most cases there is no need to remove component when installing Versa-Shield. Withstands 500F of direct heat/2000 radiant Edges attach to itself with hook and loop closure design Universal-trim length to size Can easily be removed for shows No need to remove starter for installation in most cases Multiple uses to protect master cylinders, cool cans, distributors, fuel pumps and more 7 wide x 24 long
Thermo-Tec 11675 1' x 6" Stainless Steel Clamp-On Heat Shield 26884 1.00 Thermo-Tec 11675 1' x 6" Stainless Steel Clamp-On Heat Shield
$ 47.22
The Thermo-Tec 11675 1'x6" Stainless Steel Clamp-On Heat Shield incorporates Thermo-Tec proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The improved flexible Stainless Steel Clamp-On Heat Shield blocks over 95% of the damaging radiant heat of the exhaust. The Stainless Steel construction of this heat shield provides the ultimate in protection. Comes complete with all clamps and new stainless stand offs. Easily installs in minutes. Features: Durable, Stainless Steel Construction Blocks 95% Of Radiant Heat Made In The USA
Thermo-Tec 11676 2' x 6" Stainless Steel Clamp-On Heat Shield 26885 2.00 Thermo-Tec 11676 2' x 6" Stainless Steel Clamp-On Heat Shield
$ 67.11
The Thermo-Tec 11676 2'x6" Stainless Steel Clamp-On Heat Shield incorporates Thermo-Tec proprietary coating technology developed by Thermo-Tec, Thermal Conduction Technology. The improved flexible Stainless Steel Clamp-On Heat Shield blocks over 95% of the damaging radiant heat of the exhaust. The Stainless Steel construction of this heat shield provides the ultimate in protection. Comes complete with all clamps and new stainless stand offs. Easily installs in minutes. Features: Durable, Stainless Steel Construction Blocks 95% Of Radiant Heat Made In The USA
Thermo-Tec 13200 Battery Wrap Acid Absorbing Heat Barrier 1911 5.00 Thermo-Tec 13200 Battery Wrap Acid Absorbing Heat Barrier
$ 23.12
Battery Wrap Acid Absorbing Heat Barrier The World's only acid-neutralizing heat barrier mat. It reflects over 90% of radiant heat, traps and neutralizes battery acid, protects against corrosion, is recyclable, protects the environment, and is inexpensive and easy to install. The Battery Heat Barrier Kit is completely safe to handle before and during installation. It is used by all branches of the United States military. The Battery Heat Barrier Kit is also available in rolls or mats.
Thermo-Tec 13700 24K Heat Barrier 29702 5.00 Thermo-Tec 13700 24K Heat Barrier
$ 27.02
The Thermo-Tec 13700 24K Heat Barrier is an innovative and excellent heat insulation product. The 24 K Heat Barrier helps protect vital engine components and provides a barrier against radiant heat up to 2000°F. Help lower intake and under hood temperatures. Easily installs virtually anywhere with an adhesive backing. This Heat Barrier is ideal for use on sensitive parts such as hoses, wiring, and any other place that heat may be an issue. Features: 12" x 24" Heat Barrier Protect Vital Engine Components Lowers Intake and Underhood Temperatures
Thermo-Tec 13775 24K Heat Barrier 29703 5.00 Thermo-Tec 13775 24K Heat Barrier
$ 54.05
The Thermo-Tec 13775 24K Heat Barrier is an innovative and excellent heat insulation product. The 24 K Heat Barrier helps protect vital engine components and provides a barrier against radiant heat up to 2000°F. Help lower intake and under hood temperatures. Easily installs virtually anywhere with an adhesive backing. This Heat Barrier is ideal for use on sensitive parts such as hoses, wiring, and any other place that heat may be an issue. Features: 24" x 24" Heat Barrier Protect Vital Engine Components Lowers Intake and Underhood Temperatures
Thermo-Tec 13775-50 24K Heat Barrier 29704 5.00 Thermo-Tec 13775-50 24K Heat Barrier
$ 1351.03
The Thermo-Tec 13775-50 24K Heat Barrier is an inovative and excellent heat insulation product. The 24 K Heat Barrier helps protect vital engine components and provides a barrier against radiant heat up to 2000°F. Help lower intake and under hood temperatures. Easily installs virtually anywhere with an adhesive backing. This Heat Barrier is ideal for use on sensitive parts such as hoses, wiring, and any other place that heat may be an issue. Features: 24" x 50' Protect Vital Engine Components Lowers Intake and Underhood Temperatures