Install the Viair 20002 Continuous Duty On-Board Air System in your vehicle to power a wide range of pneumatic applications. This kit includes a 200 PSI rated, 485C CE compressor, 2.5 gallon air tank, and all components needed to install a working system to either air up tires, power air horns, load leveling kits, and so much more.
Features:
- 2.5 Gallon 200 PSI Air Tank
- IP Rated - Dust & Waterproof
- 485C Stealth Black VIAIR Compressor
- Ideal For Airing Up Larger Off-Road Tires And Other Accessories
- Includes Accessory Airline, Braided Black Coil Hose, & Digital Tire Inflation Gun
Kit Includes:
2.5 Gallon VIAIR Air Tank (200 PSI)
485C Stealth Black VIAIR Compressor w/ Thermal Overload Protector
Digital Tire Inflation Gun with 180 PSI Gauge
30ft. Inside Braided Black Coil Hose with Quick Connects
1/4” NPT Quick Connect Stud (F)
1/4” NPT Quick Connect Coupler (F)
Dash Panel Gauge with ON/OFF Switch
Sealed Pressure Switch (165 PSI on, 200 PSI off)
Reducer 1/8” NPT (F) to 1/4” NPT (M)
Reducer 3/8” NPT (F) to 1/4” NPT (M)
1/4” NPT 250 PSI Safety Valve
1/4” NPT Drain Cock
(3) 1/4” NPT Compression Fittings
4” Strip of Grommet Material
20ft. 12-Gauge Wire with Inline Fuse Holder
Electrical Connections
Accessory Airline
Specifications:
12-Volt
Permanent Magnetic Motor
Duty Cycle: 100% @ 200 PSI
Max. Working Pressure: 200 PSI
Max. Air Tank Size: 5.0 Gallon
Max. Amp Draw: 23-Amps
Ingress Protection Rating: IP67
Max Ambient Temp: +158°F
Min Ambient Temp: -40°F
Dimensions: 10.63″L x 4.1″W x 6.44″H
Net Weight: 11.10 lbs.
Note:
Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.