{{ product.name }}
See New Part # {{ product.superseded_product_sku }}
{{ determineProductPrice( product ) }}
{{ determineProductSalePrice( product ) }}
0
No Products
No Results
Showing Parts for —
{{ active_vehicle.name }}
Did you mean {{ response.didYouMean.query }}?
BD-Power
BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Owing to its heritage as a diesel fuel systems specialist, BD is still a factory-certified Bosch, Stanadyne, Delphi and Zexel calibration and repair lab. Their name became more widely recognized, though, when they introduced the first exhaust brake for the diesel pick-up truck. BD currently designs, assembles and tests engine and remote mount brake systems, as well as offering fuel management systems. BD created its own department for circuit board design/assembly, programming and wire harness assembly. As the largest BD distributor in the United States, XDP has extensive BD product knowledge and inventory on hand.
Give your 47/48RE transmission a serious upgrade in strength and reliability in you high-horepower truck with the BD Power 1065200 37-Spline Input Shaft Kit. This kit features the pump stator support assembly, a 1-3/16 diameter 37-tooth involute spline input shaft for maximum strength that has been torsion tested for over 4000 ft-lbs without failure.Features:1-3/16" Diameter 37-tooth Involute Spline GeometryIncludes Pump Stator Support AssemblyApplication Note: Must be used in conjunction with the Hi5 or ProForce 3D multi-disc Solid Shaft capable converter
Get the most out of your built transmission with the BD Power 1071266 HI5 Solid Shaft 37-Spline High Stall Torque Converter. This converter is one of the most feature laden converters on the market with a solid 37 spline hub shaft, the ability to switch stall/stator speeds, and fully rebuildable while at the track with the available rebuild kits. Features:Solid 37 Spline Hub ShaftFit 6 or 12 Bolt FlexplatesAbility To Switch Stall SpeedsFurnace Brazed Turbine And ImpellerFully Rebuildable With BD-Power Clutch rebuild Kits.Application Note: Solid Shaft part number 1065200 is required.
The BD-Power 1.0 A/R Turbine Housing is a perfect upgrade to your factory 0.84 A/R housing. This is the same turbine housing BD-Power uses on their Thruster II Turbochargers!
Features:
Reduce Backpressure
Lower EGT's
Increase Efficiency
For Use With Stock Turbocharger
Add an exhaust brake to your 2011-2016 Ford 6.7L Powerstroke with the BD-Power 1027150 Remote Mount Exhaust Brake. Designed to work with aftermarket performance turbochargers such as the BD-Power Scorpion Turbo Kit, this remote mounted exhaust brake provides you with over 55psi of retarding back pressure. Featuring BD's exclusive Variable Orifice Technology, this Remote Mount Exhaust Brake provides peak retarding power throughout the engines rpm range, unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM .The advantage to regulating the butterfly vs. other brands is: The Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding. Furthermore no maintenance or lubricating is required providing miles of trouble free service. The BD Brakes rugged cast-iron housing incorporates BDs exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. All BD Brake kits come complete with the brake, and hardware needed for installation. 24 month, 24,000 mile parts warranty.Features:Over 55PSI Of Retarding Back Pressure Proven To Stand Up Under Harsh, High-Heat ConditionsWorks With BD-Power Scorpion and Other Aftermarket Turbochargers
The BD-Power 1027342 Remote Mount Exhaust Brake for your 2007.5-2012 Dodge 6.7L Cummins is the strongest in the industry! Descending grades with trailers can be hazardous and tricky situations, resulting in over heated service and trailer brakes, that lead to brake fade, excessive wear, and costly unwarranted repairs.
This exhaust brake kit allows you to keep the exhaust braking feature after the stock VGT Turbocharger has been removed and an aftermarket one has been put it in its place. This Exhaust Brake has been designed to be controlled by ECM just like the stock VGT turbocharger meaning it is controlled by the switch already in your dash. All of the features of the original brake including the cold weather warm-up feature, cruise control compatibility and the brake release on downshifts to reduce transmission wear will all still work. This kit comes complete with a control module and wiring harness to plug in where the stock turbocharger connected, this means there is no splicing into stock wiring, no wiring through the firewall and a much cleaner installation.
Features: Works With Pre-Existing Factory Switch 4" Remote Mount Exhaust Brake
For Use With Aftermarket Turbos
Controlled By Factory ECM
Reduced Installation Time
Note: This exhaust brake is not for use on trucks with a stock turbo, it is designed for use on trucks that have an aftermarket non-vgt turbocharger. Your truck must already have an in-dash exhaust brake switch.
The BD-Power 1027343 4" Remote Mount Exhaust Brake for your 2013-2018 Dodge 6.7L Cummins is the strongest in the industry! Descending grades with trailers can be hazardous and tricky situations, resulting in over heated service and trailer brakes, that lead to brake fade, excessive wear, and costly unwarranted repairs.
This exhaust brake kit allows you to keep the exhaust braking feature after the stock VGT Turbocharger has been removed and an aftermarket one has been put it in its place. This Exhaust Brake has been designed to be controlled by ECM just like the stock VGT turbocharger meaning it is controlled by the switch already in your dash. All of the features of the original brake including the cold weather warm-up feature, cruise control compatibility and the brake release on downshifts to reduce transmission wear will all still work. This kit comes complete with a control module and wiring harness to plug in where the stock turbocharger connected, this means there is no splicing into stock wiring, no wiring through the firewall and a much cleaner installation.
Features:
Works With Pre-Existing Factory Switch
For Use With Aftermarket Turbos
Controlled By Factory ECM
Reduced Installation Time
Note: This exhaust brake is not for use on trucks with a stock turbo, it is designed for use on trucks that have an aftermarket non-vgt turbocharger. Your truck must already have an in-dash exhaust brake switch.
The BD-Power 1028030 3" Remote Mount Exhaust Brake provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 3" Exhaust Systems For Trucks With On-Board Air24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included.Exhaust back pressure test gauge kit is recommended.Intended for use on trucks with on-board air. Air compressor not included. Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
The BD-Power 1028035 3.5" Remote Mount Exhaust Brake provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 3.5" Exhaust Systems For Trucks With On-Board Air24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included.Exhaust back pressure test gauge kit is recommended.For use on trucks with existing on-board air. Air compressor not included.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
The BD-Power 1028040 4" Remote Mount Exhaust Brake provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 4" Exhaust Systems For Trucks With On-Board Air24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included. Exhaust back pressure test gauge kit is recommended.For use on trucks with on-board air. Air compressor is not included.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
The BD-Power 1028050 5" Remote Mount Exhaust Brake provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 5" Exhaust Systems For Trucks With On-Board Air24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included. 4" ID brake valve is used with 5" exhaust adapters.Exhaust back pressure test gauge kit is recommended.For use on trucks with on-board air. Air Compressor not included.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
The BD-Power 1028130 3" Remote Mount Exhaust Brake With Air Compressor provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 3" Exhaust Systems Includes Air Compressor 24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included. Exhaust back pressure test gauge kit is recommended.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
The BD-Power 1028135 3.5" Remote Mount Exhaust Brake With Air Compressor provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 3.5" Exhaust Systems Includes Air Compressor 24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included. Exhaust back pressure test gauge kit is recommended.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
The BD-Power 1028140 4" Remote Mount Exhaust Brake With Air Compressor provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 4" Exhaust Systems Includes Air Compressor 24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included. Exhaust back pressure test gauge kit is recommended.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
The BD-Power 1028150 5" Remote Mount Exhaust Brake With Air Compressor provides you with additional safety, comfort, and control of your vehicle. Descending grades can be dangerous and tricky, resulting in over heated service and trailer brakes, that leads to brake fade, excessive wear, and costly unwarranted repairs. BD Engine brake has been the industries time proven Variable Regulating Back-Pressure Exhaust Brake. BD’s rugged cast-iron exhaust brake housing incorporates their exclusive AlumiBronze bushing and positive sealing piston ring, no blind holes for carbon and rust to form, and miles of leak free retarding. The stainless steel butterfly shaft that has proven to stand up under the harsh, high-heat conditions of the exhaust environment, the offset butterfly valve won’t stick, and has been strategically placed in the elbow so that it won’t impede exhaust flow when in the open position. The brake valve is actuated by an air cylinder. How It Works:Using BDs exclusive Variable butterfly Technology, providing peak retarding power throughout the engines rpm range unlike some models that rely on a hole/orifice within the butterfly to calibrate back-pressure only in the higher engine RPM.Where It Mounts: The universal in-line design mounts in the exhaust system between the engine and muffler, DPF, or cat. BD’s Butterfly is constantly exercising thus reducing the possibility of carbon and rust deposit forming that can cause premature wear and binding which can happen with other brands. Furthermore, no maintenance or lubrication is required providing miles of trouble free service. Universal Fitment: Because this brake simply mounts in-line it can be used in a wide variety of applications such as medium duty trucks, motorhomes, diesel pickups and more. Some fabrication may be required for installation. Features:Remote Mount DesignFor 5" Exhaust Systems Includes Air Compressor 24-Month / 24,000 Mile WarrantyTech Notes: Torque converter lockup controller not included. 4" ID brake valve is used with 5" exhaust adapters.Exhaust back pressure test gauge kit is recommended.Brake controls connect to throttle pedal with accelerator pedal position sensor (APPS). Vehicles without accelerator pedal position sensor (APPS) will require 1300420 micro switch and a custom bracket will have to be made.
The BD-Power 1030030 Exhaust Brake EGR Operational Kit for your 1996-1998 Dodge 5.9L Cummins with EGR is required for turbo-mounted exhaust brake installation on California emission trucks equipped from the factory with an EGR.
Features:
For Use On California Emissions Vehicles
Required To Install BD-Power Turbo-Mount Exhaust Brake
Note: California emissions vehicles can be found all over the United States. This product does not have a CARB EO number.
The BD-Power 1030050 Back Pressure Gauge Kit is designed to aid in the installation of BD-Power Exhaust Brake Kits. This liquid filled gauge for setting up back pressure regulation on butterfly style exhaust brakes. Features:160 PSI For BD-Power Exhaust Brakes
The BD-Power 1030122B Air Compressor Kit is designed for use in applications with remote mount exhaust brakes that do not have on-board air. Kit includes compressor, air hose, and hardware. No tank is used or included in this package. Features: For Remote Mount Exhaust Brakes Includes Compressor, Hardware and Air Hose
The BD-Power 1030222 Multi-Disc Torque Converter for your 2008-2010 Ford 6.4L Powerstroke is the most dependable torque converter for stock and mild power on the market today. In high torque, high-load situations, the torque converter bears the brunt of the engines force. The stock torque converter stator pitch designs slip excessively, causing the oil to foam and overheat, and the front cover clutch surface to warp. BDs torque converter was specifically designed to handle the kind of punishment you dish out.
Built on our premises in a state-of-the-art transmission facility, BD converters feature a heavy duty stamp forged steel cover, much thicker than stock and it is actually stronger than steel billet. BD-Power doubles the amount of lock up clutch material of a stock unit. They furnace braze the turbine and impeller fins to prevent internal leakage, turbine and lock up piston are balanced separately and then as a complete assembly. Turbine to impeller clearance and overall converter height is verified. BD-Power's cast aluminum stator design maximizes the low-speed torque characteristics of the Powerstroke engine.
On the street, youll notice that stall speed is reduced significantly, resulting in more positive engagement in drive, enhanced low-speed drivability, less engine rpm and better fuel economy. If you tow or just use a daily driver, youll appreciate that this model converter is designed to handle up to 1,000 lb.-ft of torque. It does not have a hard engagement; it is designed for high power towing applications.
Features:
Multi-Disc Design
Enhanced Stall
Warranty: 36-month / 150,000 mile limited warranty on non competitive, racing or sled-pulling applications.
The BD-Power 1030229 Torque Converter for your 2008-2010 Ford 6.4L Powerstroke is designed for high-performance street and towing applications. With high-torque performance and high-load situations, the torque converter must multiply the torque at low engine RPM to get the truck moving and then the lock-up clutch must hold on in peak demand. BDs TorqForce torque converter was specifically designed to handle the kind of punishment you dish out.
Built on our premises in a state-of-the-art facility, BD TorqForce converters feature a billet steel cover that does not flex and provides better heat distribution from clutch friction than the stamped steel front stock cover. We install a drain plug for ease of maintenance, a new turbine hub is welded in and we replace the plastic thrust with a Torrington bearing. The 3x clutch material provides firm holding power with a commanding engagement. Furnace brazed fins and stator design maximizes the low-speed torque characteristics that the V8 diesel engines have produced over the years. Each assembly is balanced and the overall heights are verified.
On the street, youll notice that fluid stall or coupling speed is
reduced significantly, resulting in more positive engagement in drive,
enhanced low-speed drivability and better fuel economy. Youll
appreciate that the TorqForce is designed to handle up to 1,000 lb.-ft
of torque. And if you tow a heavy trailer, check this out: The
TorqForce has been tested to 850 lb.-ft of torque, towing a 26,000 lb.
load up a six-percent grade!
Features:
Enhanced Stall For Tow and Street Use
36-Month 150K Limited Warranty
Warranty: 36-month / 150,000 mile limited warranty on non competitive, racing or sled-pulling applications.
The BD-Power 1030230 Enhanced Stall Torque Converter is built for street and towing applications in your 2001-2010 GM 6.6L Duramax. BD's exclusive engineered billet machined stator design multiplies the torque below peak engine torque. This improves fuel economy, reduces oil temperature, engine rpm and noise. BD improved the convertor lock up clutch design and fluid coupling stator efficiency which resulted in better transfer of pulling power and lower transmission failures. The Lock up clutch is designed to handle any stock or extreme modified Diesel, Stamp forged front clutch covers do not distort and securely mount in place. Features:Enhanced Stall Great For Street and Towing