Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Cognito

New Product Filters!
Cognitio CLKP-1110.11 Stage 2 10"-12" Lift Kit 20462 300.00 Cognitio CLKP-1110.11 Stage 2 10"-12" Lift Kit
$ 6327.76
The Cognitio CLKP-1110.11 Stage 2 10"-12" Lift Kit is a perfect way to lift your 2011-2019 GM 3500HD 4WD Pickup. The Stage 2, 10-12" lift kit features a 10" front lift, 4" rear block plus 4" spring lift, front and rear Fox performance series remote reservoir shocks. Level rake Features: 10" Front Lift 4" Rear Block 4" Spring Lift Provides Leveled Stance Truck Freight Item: Allow 1-2 Weeks for delivery. Shipping fees apply.
Cognito 110-90227 Front Limiting Strap Kit For 2-3" Lift 80365 5.00 Cognito 110-90227 Front Limiting Strap Kit For 2-3" Lift
$ 133
The Cognito 110-90227 Front Limiting Strap Kit For 2-3" Lift will help save the ball joints from premature wear in your 2001-2013 GM Truck or SUV. The stock shock on your truck normally acts as the droop limiter but most dual shock hoop systems do not use the stock shock location. This limiting strap kit features adjustable straps and is designed to limit the droop travel and goes in the location of the front shock when it has been relocated. Without a limiting strap, the ball joint on the upper control arm acts as the droop limiter causing premature wear on the upper ball joint. This kit includes everything needed for installation and includes a limited lifetime warrantyFeatures:For 2-3” Lift KitsExtends Ball Joint LifeLimited Lifetime WarrantyApplication Notes:2001-2013 GM 2500 2WD/4WD SUVs2003-2009 GM Hummer H2 and H2 SUT2001-2010 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD
Cognito 110-90228 Limiting Strap Kit For 10-12" Lift 80369 5.00 Cognito 110-90228 Limiting Strap Kit For 10-12" Lift
$ 133
The Cognito 110-90228 Limiting Strap Kit For 10-12" Lift will minimize the potential of damaging the upper ball joints in your 2001-2013 GM Truck or SUV. The front shocks on your vehicle act as a droop limiter on your stock suspension but dual front shock hoops usually do not use the stock location and consequently do not limit the suspension. This limiting strap kit can reduce the damage to your upper ball joints by reducing the droop travel on your lifted truck and the adjustable straps allow you to adjust the droop to your lift. This kit includes straps, bolts, and hardware needed for installation and includes a limited lifetime warranty. Features:For 10-12” Lift KitsExtends Ball Joint LifeLimited Lifetime WarrantyApplication Notes:2001-2013 GM 2500 2WD/4WD SUVs2003-2009 GM Hummer H2 and H2 SUT2001-2010 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD
Cognito 110-90230 Front Limiting Strap Kit For 4-6" Lift 80366 5.00 Cognito 110-90230 Front Limiting Strap Kit For 4-6" Lift
$ 133
Reduce the potential damage to the ball joints in your 2001-2013 GM Truck or SUV with the Cognito 110-90230 Front Limiting Strap Kit For 4-6" Lifts. Almost all dual shock hoop set ups do not use the stock front shock location and so do not act as a limiter on suspension droop. This limiting strap kit goes in place of where the front shock would be and allows you to set the droop travel with the adjustable straps. The ball joint on the upper control can be damaged without a limiting strap as the upper ball joint acts as the droop limiter when there is nothing to limit the travel of the suspension. This kit includes a limited lifetime warranty, and everything needed for installation.Features:For 4-6” Lift KitsExtends Ball Joint LifeLimited Lifetime WarrantyApplication Notes: Non Torsion Bar Drop Cognito Kits ONLY 2001-2013 GM 2500 2WD / 4WD SUVs2001-2010 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD
Cognito 110-90231 Limiting Strap Kit For 6" Subframe Lift 80367 5.00 Cognito 110-90231 Limiting Strap Kit For 6" Subframe Lift
$ 133
Lessen the chance of damage front end components on your 2001-2013 GM Truck or SUV with the Cognito 110-90231 Limiting Strap Kit For 6" Subframe Lift. The stock front shock on your vehicle acts as a droop limiter but most dual shock hoops do not use the stock location and the ball joint on the upper control arm can be damaged without limiting the suspension travel. This limiting strap kit will limit the droop travel and includes adjustable straps that will allow to set the droop limit to your desired location. This kit includes all the hardware needed for installation and comes with a lifetime warranty. Features:For 6” Lift KitsExtends Ball Joint LifeLimited Lifetime WarrantyApplication Notes:2001-2013 GM 2500 2WD/4WD SUVs2001-2010 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD
Cognito 110-90232 Limiting Strap Kit For 7-9" Lift 80368 5.00 Cognito 110-90232 Limiting Strap Kit For 7-9" Lift
$ 133
The Cognito 110-90232 Limiting Strap Kit For 7-9" Lift will limit the suspension travel on your 2001-2013 GM Truck or SUV and reduce potential damage to your ball joints. The ball joint on the upper control arm can be damaged without limiting the suspension travel as the front shocks do in a stock truck. Dual front shock hoops generally do not use the stock shock location and therefore do not limit the suspension. This limiting strap set includes adjustable straps that will liming the amount of droop that is possible on the front suspension, thereby reduce the potential damage to the upper ball joints. This kit contains everything needed for installation and includes a limited lifetime warranty. Features:For 7-9” Lift KitsExtends Ball Joint LifeLimited Lifetime WarrantyApplication Notes:2001-2013 GM 2500 2WD/4WD SUVs2001-2010 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD
Cognito 110-90245 Pitman & Idler Arm Support Kit 20473 10.00 Cognito 110-90245 Pitman & Idler Arm Support Kit
$ 275.5
The Cognito 110-90245 Pitman and Idler Arm Support Kit is the perfect addition to the steering system of your 1993-1998 GM 8-LUG Vehicles. GM trucks and SUVs Pitman and Idler arms are prone to a reoccurring wear problem and have been an issue within the steering system of GM trucks and SUVs for years. The Cognito Pitman and Idler Arm Support Kit provides an instant upgrade to your steering system and gives you more control, longer tire life, and reduced driver fatigue. The kit is proudly made in the USA and includes all the necessary mounting hardware. Features:Made In the USA!Comes With All Necessary Mounting HardwareReplaces The Underachieving Factory Pitman and Idler Arm Notes:Only for use on stock height or lifted vehicles with the factory center-link in the stock location.
Cognito 110-90252 Heavy Duty Sway Bar End Links 20477 10.00 Cognito 110-90252 Heavy Duty Sway Bar End Links
5.00 5 2
$ 76
The Cognito 110-90252 Heavy Duty Sway Bar End Links are an upgraded replacement for your stock height 2001-2019 GM 2500HD/3500HD pickup. Cognito's Heavy Duty End Links utilize a lower clevis system to reduce the angles on the link during suspension cycling. This helps reduce the stress that causes the factory links to break. Cognito End Links are slightly longer than factory to allow clearance with Cognito large diameter tie-rod upgrades. Features:7" Length Heavy-Duty ReplacementFor Stock and Leveled HeightLess Angle To Minimize Stress Premium Polyurethane Bushings Made In The USA Application Notes:For the following trucks stock or leveled height:2001-2019 1500HD/2500/2500HD/3500/3500HD 2WD/4WD2001-2013 GM SUVs 2500 2WD/4WD SUV 2003-2009 GM Hummer H2s and H2 SUTs Notes:Measurements are taken from mounting surface to mounting surface.Cognito Sway Bar End Links are for use with Cognito Suspension Systems.For use on other manufacturers lift kits, please measure to confirm fitment.
Cognito 110-90253 Heavy Duty Sway Bar End Links 20478 15.00 Cognito 110-90253 Heavy Duty Sway Bar End Links
5.00 5 3
$ 76
Upgrade the factory sway bar end links in your 2001-2019 GM 2500HD/3500HD with the Cognito 110-90253 Heavy Duty Sway Bar End Links. Cognito End Links are slightly longer than the factory versions to allow additional clearance with Cognito large diameter tie-rod upgrades. Because Cognito utilizes a lower clevis system, the Heavy Duty Sway Bar End Links see less stress on them during suspension cycling. As a result, they are much more durable than the factory links. Features:11" LengthFor Lifted TrucksHeavy-Duty Replacement Reduced Angle Minimizes Stress Premium Polyurethane Bushings Made In The USA!Application Notes:For the following trucks lifted 4" with a Congito Lift Kits:2001-2019 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD 2001-2013 GM 2500 SUVs 2WD/4WDNotes:Measurements are taken from mounting surface to mounting surface.Cognito Sway Bar End Links are for use with Cognito Suspension Systems.For use on other manufacturers lift kits, please measure to confirm fitment.
Cognito 110-90254 Heavy Duty Sway Bar End Links 20479 15.00 Cognito 110-90254 Heavy Duty Sway Bar End Links
$ 95
Upgrade the Sway Bar End Links on your lifted 2001-2019 GM 2500HD/3500HD with the Cognito 110-90254 Heavy Duty Sway Bar End Links. Cognito's lower clevis system helps reduce the angles on the link during suspension cycling. As a result, the stress on the End Link is drastically reduced providing a longer life. Cognito End Links have a slightly extended length allowing them to work with Cognito large diameter tie-rod upgrades. Features:12.75" Length For Lifted TrucksHeavy-Duty ReplacementLess Angle To Minimize Stress Premium Polyurethane Bushings Made In The USA Application Notes:For the following trucks lifted 6" with a Congito Lift Kits:2001-2019 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD2003-2009 GM Hummer H2s and H2 SUTs2001-2013 GM 2500 SUVs 2WD/4WD Notes:Measurements are taken from mounting surface to mounting surface.Cognito Sway Bar End Links are for use with Cognito Suspension Systems.For use on other manufacturers lift kits, please measure to confirm fitment.
Cognito 110-90255 Heavy Duty Sway Bar End Links 20480 15.00 Cognito 110-90255 Heavy Duty Sway Bar End Links
$ 76
Upgrade the Sway Bar End Links on your lifted 2001-2019 GM 2500HD/3500HD with the Cognito 110-90255 Heavy Duty Sway Bar End Links. To help reduce the stress that causes the factory links to break, Cognito's Heavy Duty End Links utilize a lower clevis system to reduce the angles on the link during suspension cycling. Cognito End Links are slightly longer than the factory versions to allow additional clearance with Cognito large diameter tie-rod upgrades.Features:14" LengthFor Lifted TrucksHeavy-Duty Replacement Reduced Angle Minimizes Stress Premium Polyurethane Bushings Made In The USA!Application Notes: For the following trucks lifted 7" with a Congito Lift Kits: 2001-2019 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD2000-2006 GM 1500 SUV 2WD/4WD1999-2006 GM 1500 Truck 4WD For the following trucks lifted 10" with a Congito Lift Kits:2007-2018 GM 1500 2WD/4WD Trucks and SUVNotes:Measurements are taken from mounting surface to mounting surface. Cognito Sway Bar End Links are for use with Cognito Suspension Systems. For use on other manufacturers lift kits, please measure to confirm fitment.
Cognito 110-90256 Heavy Duty Sway Bar End Links 20481 15.00 Cognito 110-90256 Heavy Duty Sway Bar End Links
$ 76
Replace the broken factory End Links in your 2001-2019 GM 1500/2500HD/3500HD with the Cognito 110-90256 Heavy Duty Sway Bar End Links. Cognito End Links are slightly longer than factory to allow clearance with Cognito large diameter tie-rod upgrades. Cognito's lower clevis system helps reduce the angles on the link during suspension cycling. As a result, the stress on the End Link is drastically reduced providing a longer life.Features:17" Length For Lifted TrucksHeavy-Duty ReplacementLess Angle To Minimize Stress Premium Polyurethane Bushings Made In The USA Application Notes:For the follow trucks lifted 10" with a Cognito Lift Kit:2001-2019 GM 1500HD/2500/2500HD/3500/3500HD 2WD/4WD2003-2009 GM Hummer H2s and H2 SUTs2001-2013 GM 2500 SUVs 2WD/4WD2000-2006 GM 1500 SUVs 2WD/4WD1999-2006 GM 1500 Truck 2WD/4WDNotes:Measurements are taken from mounting surface to mounting surface.Cognito Sway Bar End Links are for use with Cognito Suspension Systems.For use on other manufacturers lift kits, please measure to confirm fitment.
Cognito 110-90258 Shock Extender Kit 27179 2.00 Cognito 110-90258 Shock Extender Kit
$ 42.75
The Cognito 110-90258 Shock Extender Kit for your 2011-2016 GM 2500HD/3500HD 2WD/4WD is designed for use with some stock and Cognito Upper Control Arms. See specific lift kit or control arms for application. Features: Shock Extender Kit Works With Cognito Shocks and UCA Kit Specific Applications Include: Leveling kit using stock shocks and stock upper control arms. Leveling kit using Cognito UCA kit with Cognito shocks. Cognito lift kit used with Cognito UCA kit and Cognito shocks.
Cognito 110-90259 Shock Extender Kit 32703 3.00 Cognito 110-90259 Shock Extender Kit
$ 90.25
The Cognito 110-90259 Shock Extender Kit for your 2011-2019 GM 2500HD/3500HD 2WD/4WD is designed to work with the Cognito upper control arm leveling kit while using your stock shocks. Features: Shock Extender Kit Works With Cognito Shocks and UCA Kit Specific Applications Include: Leveling kit using stock shocks and Cognito upper control arm kit.
Cognito 110-90269 Torsion Bar Keys 26268 12.00 Cognito 110-90269 Torsion Bar Keys
$ 94.05
The Cognito 110-90269 Torsion Bar Keys for your 2001-2010 GM 2500HD/3500HD provide 2 inches of lift to the front of your truck. Designed to be used on their own, or with the Cognito Lift Kits, these Torsion Bar Adjuster Keys are an easy way to get some lift in the front of your truck. Features:Up To 2" Of Lift Made In The USA! Fits 2500HD/3500HD Trucks
Cognito 110-90270 Torsion Bar Keys 29543 20.00 Cognito 110-90270 Torsion Bar Keys
5.00 5 1
$ 122.55
The Cognito 110-90270 Torsion Bar Keys will raise the front of your Chevy and GMC 2011-2019 2/4WD 2500HD and 3500HD. Not designed to be used with any other leveling kit. Greater steering angles arise with leveling kits, therefore pitman and idler arm kit PISK3008 (sold separately) is recommended to prevent premature wear of pitman and idler arms. Torsion Keys only, shock spacers not included. Features: Provides Up To 2" Lift PSIK3008 Pitman and Idler Arm Kit Recommended (Sold Separately)
Cognito 110-90277 TrimmLine 2" Leveling Kit 20378 50.00 Cognito 110-90277 TrimmLine 2" Leveling Kit
$ 151.05
The Cognito 110-90277 TrimmLine 2" Leveling Kit will raise the front of your Chevy and GMC 2011-2016 2/4WD 2500HD and 3500HD. This package includes tosion keys and shock spacers. This leveling kit will allow you to fit a 33" dia 11" wide tire max on 8"-9" wide wheel with 4.5"-5" backspacing. Not designed to be used with any other leveling kit. Greater steering angles arise with leveling kits, therefore pitman and idler arm kit PISK3008 (sold separately) is recommended to prevent premature wear of pitman and idler arms.Features:Made In The USA!Includes Torsion Keys and Shock Spacers Clear Up To 33" Diameter x 11" Wide Tires PSIK3008 Pitman and Idler Arm Kit Recommended (Sold Separately)
Cognito 110-90280 Heim Joint Style Tie Rod Kit 20476 25.00 Cognito 110-90280 Heim Joint Style Tie Rod Kit
$ 451.25
The Cognito 110-90280 Heim Joint Style Tie Rod Kit boosts the performance of the steering system of your 2001-2010 GM 2500HD/3500HD 2WD/4WD (W/ Spindle/Knuckle Style Lift Kit). The Tie Rod Kit ensures that you have complete control over your truck and prevents damage to your tires caused by a failing tie rod.Features:Made In The USA!For Use With Aftermarket SpindlesHeim Joint Tie Rod Kits Are Not Recommended For Use In Environments With Harsh Weather ConditionsWill Not Work On Stock Height 4Wd Vehicle Due To The Large Clevice Of The Inner Joint Interfering With The Front Differential
Cognito 110-90281 Heim Join Style Tie Rod Kit 20475 25.00 Cognito 110-90281 Heim Join Style Tie Rod Kit
$ 451.25
The Cognito Heim Joint Style HD Tie Rod Kit provides your 2001-2010 GM 2500HD/3500HD 2WD/4WD (W/ Factory Spindles) with elite tie rods. The tie rod kit ensures that you always have control over your steering system and your truck and prevent the damage caused by worn out tie rods. Features:Made In The USA!Does Not Require Modification To SpindlePremium FK Heim Joints Made In The USA!Stainless Steel Tapered Spindle Stud For Added StrengthAdjuster Tubes And Steering Adapters Provided Have A Satin Black Powder Coat FinishNotes:These Heim Joint Tie Rod Kits are not recommended for use in environments with harsh weather conditions since the Heims do not have protective boots to keep debris/salt out of the joints.Will Not Work On Stock Height 4Wd Vehicle Due To The Large Clevice Of The Inner Joint Interfering With The Front Differential
Cognito 110-90283 Alloy Series Tie Rod Kit 20474 15.00 Cognito 110-90283 Alloy Series Tie Rod Kit
5.00 5 2
$ 312.55
Upgrade the Tie Rods on your 2001-2010 GM 2500HD/3500HD Pickup with the Cognito 110-90283 Alloy Series Tie Rod Kit. Cognito Motorsports Tie Rod Kit has a heavy duty inner joint with an oversized alloy ball and socket to provide the ultimate in durability. Sold as a pair.Features: Heavy-Duty Upgrade Inner Joint Incorporates Oversized Alloy Ball and Socket
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:

  • UPDATE: Effective 6/1 Customer Service resumes normal business hours of M-F 8:30 – 9:00pm EST.
  • Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
  • Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
  • All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.