Products Showing Parts for — {{ }}

No Results Showing Parts for — {{ }}
USD 371.91
Part #: AFE46-70120-1

AFE 46-70120-1 Transmission Pan (Raw Finish)

1994-2010 Ford 7.3L/6.0L/6.4L Powerstroke (Equipped with E4OD/4R100/5R110)
Part #: AFE46-70120-1
★★★★★ ★★★★★ 4 Reviews
Buy now, pay later using Affirm Logo during checkout.
Our Recommendations Compatible Products
Scroll to View More


The AFE 46-70120-1 Transmission Pan for your 1994-2010 Ford 7.3L/6.0L/6.4L Powerstroke equipped with a E4OD, 4R100, or 5R110 brings performance engineering to the protection of your transmission. AFE 's transmission pan adds an additional 6 quarts over the factory pan. Internal and external fins transfer heat from the fluid to the ambient air for maximum cooling. This transmission pan is constructed out of durable die-cast A380 aluminum with reinforced ribs for maximum strength. When it comes to engineering for power, performance, protection and value, AFE  Power is the only choice.

Internal and External Fins:
Internal and external fins help draw heat from the fluid to the outside air for improved cooling.

Magnetic Drain Plug:
This pan incorporates a large neodymium magnetic drain plug that captures loose ferrous metals for greater transmission protection .

1/8" NPT Port:
Threaded 1/8" NPT port allow for the easy installation of a transmission temperature sensor.

Hassle-Free Installation:
Transmission pan comes complete with all necessary hardware and O-ring to bolt directly to factory location for a hassle-free installation.

  • Magnetic Plug
  • 6 Quarts Over Stock 
  • Internal & External Fins 
  • Die-Cast A380 Aluminum

Vehicle Applications

1994 Ford 7.3L Powerstroke
1995 Ford 7.3L Powerstroke
1996 Ford 7.3L Powerstroke
1997 Ford 7.3L Powerstroke
1999 Ford 7.3L Powerstroke
2000 Ford 7.3L Powerstroke
2001 Ford 7.3L Powerstroke
2002 Ford 7.3L Powerstroke
2003 Ford 6.0L Powerstroke
2003 Ford 7.3L Powerstroke
2004 Ford 6.0L Powerstroke
2005 Ford 6.0L Powerstroke
2006 Ford 6.0L Powerstroke
2007 Ford 6.0L Powerstroke
2008 Ford 6.4L Powerstroke
2009 Ford 6.4L Powerstroke
2010 Ford 6.4L Powerstroke


  • MFG. Number 46-70120-1
  • Manufacturer Name AFE
  • Shipping Weight 17.00 lb.
  • Shipping Length 17 in.
  • Shipping Width 13 in.
  • Shipping Height 7 in.
  • Fuel Type Diesel
  • UPC 802959464366
  • Warranty Yes
  • Warranty Info Limited Lifetime
  • Prop 65 Prop 65 WarningWARNING: Cancer & Reproductive Harm -
  • Internal L5.00R0.00


★★★★★ ★★★★★
3.8/5 Stars out of 4 Reviews
Pan Hardware
As far as the raw pan itself goes it is a good buy. I just wanted to make mention of an issue I had with the product. The 20 cap screws were supposed to be M8-1.25mm and instead I received all 5/16"-18 TPI cap screws. They are very similar in size so I installed each one of them before realizing something was not right when I started to torque them. I ended up getting a tap set to chase all of the threads and purchased 20 of the correct cap screws from McMaster. I also got the 25mm length as the cap screws included with the kit are only 19 mm and don't get much of a purchase on the transmission case. To summarize I'd say the pan is worth it, just check that hardware!
Great Pan
To be honest I opted for the raw finish to save some cash then before installation I got some truck bed liner and sprayed it down which gave it a nice layer of protection. Only gave it 4 starts because its a pain of the ass to install UNTIL YOU REALIZE YOU NEED TO REMOVE THE TRANSMISSION SUPPORT. Brace the transfer case with a jack. Remove the 5 15mm Bolts on each side and the 2 21mm nuts and you are in business. After realizing this it would have honestly taken me an hour tops. Take your time don't rush. Great finish, great threads (drain & temp sensor plug ) great product.
Tight, but good fit
It is a very well built, heavy, cast pan. It looks very nice and is easy to tell its been made with quality. The pan fit my transmission bolt pattern great, however plan on spending some time tightening the three bolts across the back of it, the design of the pan being deeper makes it a real pain to get to those rear bolts which are directly above the transmission crossmember, and the fact the bolts included are Allen head and not hex head make the task even more challenging. All in all it seems very good, it uses a durable o ring gasket with an o ring groove machined into the pan. No leaks and looks great under the truck, just plan on spending a little more time removing the pan for future filter changes.
Pages 1   2

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Questions and Answers

Does this pan come with the filter? If not what filter does it use? Also how deep is the pan?
View Staff Answer 

The AFE 46-70120-1 TRANSMISSION PAN (RAW FINISH) does come with a transmission filter. Furthermore, the pan will hold an additional 7.5 quarts over the stock transmission pan.

Is the transmission filter included? Also is it a stock filter or is it extended for the pan? Thanks
View Staff Answer 
Yes. AFE includes a filter with part# AFE 46-70120-1. Use only the included aFe 44-TF011 or Motorcraft 8C3Z7A098D replacement filters with this pan.

Ask a question about this product

Please allow up to 1 business day for reply.

More to Consider

Recently Viewed