Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
USD 149
Part #: BD1032050

BD-Power 1032050 Sway Bar End Links

2000-2009 Dodge Ram 2500/3500 4WD
Part #: BD1032050
★★★★★ ★★★★★ 5 Reviews
$149.00
In-Stock
SHARE
Our Recommendations Compatible Products
Close
Scroll to View More

Description

The BD-Power 1032050 Sway Bar End Links are a must-have upgrade for one of those pesky maintenance items that are so often replaced. Put an END to your END LINK Replacements! The factory sway bar end links on the 2000-2009 4WD 2500/3500 (Diesel and HEMI) are prone to wearing or pounding out, and, even breaking when the truck is lifted on 2-post vehicle lifts due to the stress of the axle dropping.

BD's Sway Bar End Links have a Dual Pivot Design that allows for greater amount of articulation and less stress. Long life Urethane bushing design allows for greater flex without breaking and will not pound out or seize due to the elements. Things that even the competition would be envious of. All components are designed to be easily serviceable and wearing items are low cost to replace. Kits come complete with all hardware* and can quickly be installed in approximately 1-hour.

Features:
  • Urethane bushing allows for greater flex without breaking
  • Simply remove and replace your O.E sway bar end links
  • Components can be easily serviced for extended life
  • Kit comes complete with all hardware needed
Application Notes: 
Does not fit Power Wagon models.
Trucks lifted more than 3-inches will require sway bar offset spacer which is typically included in most lift kits. 

Specifications

  • MFG. Number 1032050
  • Manufacturer Name BD-Power
  • Shipping Weight 6.00 lb.
  • Shipping Length 7 in.
  • Shipping Width 7 in.
  • Shipping Height 5 in.
  • Fuel Type Diesel / Gas
  • UPC 019025010147
  • Warranty Yes
  • Warranty Info 1 Year / 24,000 Mile
  • Prop 65 WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

Reviews

★★★★★ ★★★★★
4.6/5 Stars out of 5 Reviews
5
4
4
0
3
1
2
0
1
0
INCREDIBLE
5
(OREGON) | June 19th, 2020
LAST YEAR I HAD TO REPLACED THE END LINKS ON MY 01 2500 BUT THESE WERE ON BACK ORDER SO I WENT WITH THE MOOG LINKS, THEY WERE NICE AND HELD UP BETTER THAN THE PART STORE BRANDS. DECIDED IT WAS TIME TO UPGRADE, THE INSTALL WAS PRETTY PAINLESS. YES YOU WILL HAVE TO DRILL OUT A HOLE ON EACH SIDE BUT ITS WORTH IT. NOT ONLY DO THEY LOOK AMAZING YOU WILL NOTICE THE DIFFERENCE. COULD NOT BE HAPPIER WITH THIS PURCHASE .... THANK YOU AGAIN XDP
Outstanding!!!
5
(State College, Pa) | May 21st, 2018
Installed over the weekend on my 04. Couldn't be more happy with this purchase. The old TUFF COUNTRY SWAY BAR END LINKS 30927 broke. Installation was a breeze! This kit did require a 14mm drill bit. Happy with with this purchase!
BD and XDP Rock!
5
(Crown Point, IN) | May 18th, 2012
Two days from order online to my door. Great start. BD's product is perfect. The actual link, bushings, etc. look MUCH better that in these pics. I cannot imagine a stronger link out there... Maybe billet titanium but I don't see that happening. Best money I've spent in a long time. XDP had the best price, fast free shipping so what more can you ask for???
Pages 1   2

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

How do they install?
View Staff Answer 
Can you use these on a non-lifted truck? Stock Truck Height
View Staff Answer 
Answer

The BD-Power 1032050 Sway Bar End Links can be used on both stock height and lifted trucks. (Trucks lifted more than 3-inches will require sway bar offset spacer which is typically included in most lift kits.)

Is it a pair or individual?
View Staff Answer 
Answer

The BD-Power 1032050 Sway Bar End Links are sold as a pair.

Are these applicable to a none lifted truck with stock suapension?
View Staff Answer 
Answer
Yes, the BD-Power 1032050 Sway Bar End Links can be used on both stock height and lifted trucks. (Trucks lifted more than 3-inches will require sway bar offset spacer which is typically included in most lift kits.)
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:

  • UPDATE: Effective 6/1 Customer Service resumes normal business hours of M-F 8:30 – 9:00pm EST.
  • Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
  • Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
  • All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.