Driven Diesel DD-67L-1116-TCOOL Auxiliary Transmission Cooler

Keep the transmission temperatures down in your 2011-2016 Ford 6.7L Powerstroke with a Driven Diesel DD-67L-1116-TCOOL Transmission Cooler Kit from XDP. This kit retains the OEM cooler, adding this liquid to air heat exchanger after the factory liquid-to-liquid unit. The cooler adds approximately 1-1.5 quarts of fluid capacity to the system. Check out the wide selection of Driven Diesel parts at XDP today.

Features:

• 30" x 7" Cooler Core
• 1/2" Cooler Inlet/Outlet
• Gates 400psi Cooler Hose
• T-304 Stainless Steel Brackets
• OEM Style Fasteners & Clamps
• Detailed Full Color Instructions

Note:
Unless already modified, 2011-2016 Trucks have a thermal bypass valve in the transmission cooler passage in the valve body. This valve controls fluid flow to the cooler(s). With an unmodified valve body and this cooler, you may not see temperatures significantly below 200°F, as the valve will bypass the cooler if the fluid temperature drops too much. Using this cooler with the factory thermal bypass valve in place should still result in a very noticeable temperature drop, and overall transmission temperatures hovering right around the opening temperature of the bypass valve. If you have a modified valve body or aftermarket transmission, and your builder has either modified or eliminated the thermal bypass valve, you will likely see even lower temperatures.