Fleece PowerFlo In-Tank Fuel Lift Pump FPE-34755

PART# FPE-34755 | SKU FPE-34755
★★★★★ ★★★★★ 4.8 (4 Reviews)

Vehicle Fitment For:
2003-2004.5 Dodge with 5.9L Cummins Engine

See full application list below
$1,099.00

Ships directly from the manufacturer
An Email Will Be Sent With Expected Shipping Date After Purchase
FREE Delivery by ,
If you order within hr min
This product cannot be shipped to your destination
Not Shipping to ?
Need it faster?

Description

The Fleece FPE-34755 PowerFlo Lift Pump is a factory-style high-performance lift pump designed to easily replace the factory unit in your Dodge 5.9L Diesel. There's no need for cutting holes in your fuel tank, enduring noisy frame-mounted lift pumps, or suffering from quarter-tank fueling issues. Utilizing the factory connections, Fleece's PowerFlo is designed for an easy installation while the "active fill bucket" technology eliminates the need for a draw straw or fuel tank sump. Two OE quality gerotor pumps provide enough fuel to support 800+ RWHP and surpassed 12,000 hours of testing to ensure durability and reliable performance.

Direct OEM In-Tank Fitment: 
The PowerFlo Lift Pump requires no drilling, cutting, or sumps to cut into your fuel tank and installs in less than half the time of other high flow lift pumps.  

Dual Gerotor: 
Two is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and reliability over the factory pump. Capable of supporting up to 800 hp, including dual CP3 pump configurations.  

Seamless Integration: 
The active fill bucket eliminates the need for tank sumps, draw straws, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need.

Features:
  • Drop-in Lift Pump
  • Silent Operation
  • Supports 800 RWHP
  • Utilizes Factory Connections
  • No Sump Or Draw Straw Needed
  • Regulated Return Eliminates Over Pressure Situations

Kit Includes:
Filter Base With Integral Mounting
Fuel Filter Delete (FPE-FFD-RO-3G)
Distribution Filter Block / Filter Coupler
PowerFlo Lift Pump With Integral Fuel Sender
Push Lock Hose And All Necessary -AN & Barb Fittings
Donaldson 3 Micron Fuel Filter And Water Separator (Donaldson P/N P553203)

Fitment:
2003-2004.5 Dodge Ram including 2004 trucks with dealer installed in-tank retrofits. 
This kit is designed to fit tanks WITHOUT the metal locking ring and alignment tab. MY2003-2004.5 trucks utlize a plastic locking cap.  MY2005 and up tanks are equipped with a metal locking ring and alignment tab on the pump cap.  
Trucks with a factory or dealer retroffitted in-tank pump will the use this kit, part number FPE-34755.

Application Notes:

Operating Pressure: 15-17 psi at idle  
PowerFlo lift pumps are validated for usage with up to 20% biodiesel. 
Shipping Restrictions Apply shipping restriction icon This product can not be shipped to these states/provinces: CA
Disclaimer: XDP is in no way affiliated with Cummins or any of its subsidiaries or related companies, and that Cummins has not authorized the sale of any of XDP's parts, and has not tested or approved any of XDP’s parts for use in genuine Cummins brand products.

Instructions & Tech Info

Reviews For Fleece Performance FPE-34755

Overall Rating
4.8/5
4 Reviews
Rating Snapshot
5 ★
3
4 ★
1
3 ★
0
2 ★
0
1 ★
0
Verified Buyer
★★★★★ ★★★★★
Why did I wait so Long?!
Nate (Colorado) | November 21st, 2024
My 03 had been struggling for a while, and at 246k I had just gotten used to the truck feeling a little bit tired. When I noticed my fuel mileage was dropping off I knew it was time to look into my fueling. I still had my factory lift pump system (an after thought for that year) and after talking to a friend/tech I realized how starved my injection pump must be. I pulled the trigger on this system after a bit of research. Install was very straightforward, and yes the instructions leave some gaps, but it’s enough of a heads up. The parts and materials are top notch. The pump unit is stout and well made. The fuel hose and fittings are really easy to work with. The filter housing is very well placed in the engine bay, where it should be and not on the frame rail, allowing you to utilize the factory wiring for the WIF sensor and the fuel heater. Overall, a very easy install with no modifications to the truck. After a good priming (bump the starter after your first KOEO to keep the pump working) the truck fired easily and the differences were immediately evident. Idle was smooth and balanced. The exhaust pulse at the tail was more even. Less injector, engine, and clutch rattle. Then after driving, easier shift engagement, faster spooling and rpm climb. Far more stable pedal feel, most noticeable for me at cruising positions. It’s too soon to report on the MPG question but I am hopeful considering the other improvements. If you have a Dodge, put THIS system in.
Verified Buyer
★★★★★ ★★★★★
Best fuel system out there!
Kevin (Indianapolis) | July 22nd, 2023
I absolutely love it, compared to my Raptor and FASS IV previously used in other trucks this is suck. This is a cleaner and more Effective setup.
Verified Buyer
★★★★★ ★★★★★
Best overall
Rich (NJ) | May 20th, 2023
Such a great system my only reason for not 5 stars when doing the installation with the kit you have to look at multiple instructions online but after that was great easy install everything was in this kit to make it work from start to finish order number #2002366
Verified Buyer
★★★★★ ★★★★★
SO MUCH BETTER THAN AN AIR DOG
James (Idaho) | September 9th, 2020
After my lift pump died, I ran an Air Dog on my 2003 Ram for about 9 years. I got tired of the quarter tank issues and noise so decided to replace it with this Fleece pump. If you are on the fence between an Air Dog/FASS type pump and this one, I highly suggest you go this route. This thing is amazing! Its quiet, no quarter tank issues anymore, and no more filters hanging out right under the door and in the elements (the provided filter fits roughly where the stock one is). The truck runs better now and seems to have some more power too. The instructions need to be revised to make more sense, but that's a small issue. The kit comes with everything you need to install the new system, including the banjo washers, just have some thread sealer on hand. All of the parts are high quality and packaged very well for shipping. Pro Tip: Remove the stock fuel supply line as its no longer needed and install the Fleece wiring harness in its place, it fits like it was meant to be. Run the new fuel line above the stock location, its well protected. ORDER NUMBER: 1221343
Write a Review

Review this product and help other XDP customers make informed decisions!

Overall Rating
Your Information

Frequently Asked Questions

No questions about this product. Be the first to ask a question!
Ask A Question
Ask a question about this product
Please allow up to 1 business day for reply.

More to Consider

Specifications For Fleece Performance FPE-34755

MPN FPE-34755
SKU FPE-34755
GTIN 670875716766
ID 50537
Manufacturer Name Fleece Performance
Shipping Weight 18.00 lb.
Shipping Length 22 in.
Shipping Width 10 in.
Shipping Height 12 in.
Fuel Type Diesel
Prop 65 Prop 65 WarningWARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
Internal L0R0

Recently Viewed

ITEM ADDED TO CART

Complete the job with these highly suggested add-on products.

Product prices marked with an * may require additonal fees, such as a core charge, which will be displayed in the cart.