{{ product.name }}
See New Part # {{ product.superseded_product_sku }}
{{ determineProductPrice( product ) }}
{{ determineProductSalePrice( product ) }}
0
No Products
No Results
Showing Parts for —
{{ active_vehicle.name }}
Did you mean {{ response.didYouMean.query }}?
Leveling Kits
Give your 2005-2016 Ford F250/350 4WD the highest quality leveling kit with the Bilstein 46-275356 5162 Series High Performance Leveling Kit. This leveling kit features a set of replacement cold rolled springs and two new 5160 series shocks to give your truck the ultimate off-road capability and great on road comfort. The 5160 series shocks utilize a remote reservoir that increases shock oil capacity for greater heat dissipation and are filled with high gas pressure and a longer service life even when pulling trailers or driving off-road.Features:Better HandlingEnhanced StabilityLonger Service Life 2 Cold Rolled Springs2 5160 Series ShocksApplication:2005-2016 Ford F250/350 4WD (Front) Lifted 0-2"
3
5
2
The Bilstein F4-SE5-C765-H0 5112 Series High Performance Leveling Kit is the ultimate front suspension for your 2005-2016 Ford Super Duty. Featuring replacement front coil springs and two 5100 series shock absorbers with high capacity digressive pistons and split valving that is specifically tuned for lifted truck applications. The Bilstein Tuned Suspension will raise the front of your truck around 2" while increasing your suspension travel as well as wheel travel and overall handling.
Features:
Raises Front Of Truck
Increase Wheel Travel
Improve Handling Includes (2) Front Coil Springs and (2) 5100 Series Shock AbsorbersNote: This kit is intended to lift the front of your truck around 2". Heavy aftermarket bumpers, winches, and other accessories can cause changes in ride height.
The Cognito 120-90347 2" TrimmLine Leveling Kit is an easy way to level the front of your 2005-2016 Ford F-250/350 4WD. The Cognito Leveling Kit includes all the necessary parts needed to make sure your truck has the perfect, leveled stance.Features:2'' Front LiftAllows For "Leveled Stance"
The Daystar 2" Comfort Ride Front Leveling Kit KF09101BK adds height to the front end of your 1999-2017 Ford F-250/350/450/550 Super Duty 2WD. Daystar Products has been the world leader in Polyurethane lift and leveling kits since 1977. Daystar lift and leveling kits raise your vehicle, while working within the factory suspension design. Daystar kits offer an improved ride, more ground clearance, and the ability to run larger tires and wheels, while reducing Noise, Vibration, and Harmonics (NVH).
No Metal-On-Metal Contact
Daystar uses Polyurethane material in its Leveling Kits for a reason: It's an insulator. It absorbs the Noise, Vibration, and Harmonics (NVH) that come from the suspension and avoids transmitting them to the passenger compartment. All competitors use steel or aluminum in their Leveling Kits. If you were to take apart any factory suspension, you are going to find rubber, polyurethane, and often both in a typical suspension. These pieces are there for a reason; they absorb the NVH. Sure, steel makes a great hammer, but would you want to ride on it?
Lifetime Warranty
All of Daystar's Leveling Kits are backed by a Lifetime Warranty. In the unlikely event you experience a problem with a Daystar product, they'll take care of it.
Made in the U.S.A.
All Daystar Leveling Kits are manufactured at their plant located in Phoenix, Arizona. In-house manufacturing ensures a level of quality control that no one else can match, and Daystar has the ISO9001 certification to prove it.
Features:
2" Front Leveling Kit
Fits Up To 33" Tire
Easy Install Design
No Metal On Metal Contact
Go Everywhere Warranty
No Welding Required
Note: This kit does not include shocks, please see items below.
The Daystar 2.5" Comfort Ride Front Leveling Kit KF09119BK adds height to the front end of your 2005-2017 Ford F-250/350/450/550 Super Duty 4WD. Daystar Products has been the world leader in Polyurethane lift and leveling kits since 1977. Daystar lift and leveling kits raise your vehicle, while working within the factory suspension design. Daystar kits offer an improved ride, more ground clearance, and the ability to run larger tires and wheels, while reducing Noise, Vibration, and Harmonics (NVH).
No Metal-On-Metal Contact
Daystar uses Polyurethane material in its Leveling Kits for a reason: It's an insulator. It absorbs the Noise, Vibration, and Harmonics (NVH) that come from the suspension and avoids transmitting them to the passenger compartment. All competitors use steel or aluminum in their Leveling Kits. If you were to take apart any factory suspension, you are going to find rubber, polyurethane, and often both in a typical suspension. These pieces are there for a reason; they absorb the NVH. Sure, steel makes a great hammer, but would you want to ride on it?
Lifetime Warranty
All of Daystar's Leveling Kits are backed by a Lifetime Warranty. In the unlikely event you experience a problem with a Daystar product, we'll take care of it.
Made in the U.S.A.
All Daystar Leveling Kits are manufactured at their plant located in Phoenix, Arizona. In-house manufacturing ensures a level of quality control that no one else can match, and Daystar has the ISO9001 certification to prove it.
Features:
2-1/2" Front Leveling Kit
Fits Up To 33" Tire
Easy Install Design
No Metal On Metal Contact
Go Everywhere Warranty
No Welding Required
Note: This kit does not include shocks, please see items below.
Performance Accessories Leveling Kit
Application: 08-16 Ford F-250/350 4WD
Lift: 2"
Make your 2005-2018 Ford F-250/F-350 Super Duty stand out from the crowd by installing the RBP FD1080-25 2.5" Leveling Kit. These leveling kits are CNC machined steel, black powered coated for rust protection, allow the use of a 35” tire and are made in the USA. Features:Made In The U.S.A.Fits Up To 35” TireLimited Lifetime WarrantyApplication Notes:Fits 4WD Trucks
The ReadyLift 66-2095 2.5" Leveling Kit is the fastest, safest and least expensive way to bring the front of your 05-10 Ford Super Duty truck level with the rear. Made with black e-coated steel, ReadyLift coil spacers will not deteriorate or decrease ride height over time.
The popular 66-2095 coil spacer provides up to 2.5 of lift which gives clearance to add up to 37" tires (with OEM wheels) to the 2005-2010 Ford F-250 4wd. ReadyLift spacers are Guaranteed to maintain a smooth ride without adding more pressure on the stock suspension components. Thanks to innovative engineering, ReadyLift kits cost thousands less than a traditional lift kit and only take about 1-2 hours to install. No need to buy expensive shocks. Included shock extensions allow you to retain your smooth riding factory shocks!
Features:
Retains Factory Ride
Durable E-Coated Finish
Will Never Wear, Break Or Fail
Additional InformationInstall Sheet
The ReadyLift 66-2111 1.5" Leveling Kit is an easy and affordable way to lift the front end on your 2005-2016 Ford F-250/350 4WD. These CNC-machined billet lower spacers install on the bottom of the coil spring and lift your truck 1.5" allowing for up to a 35" tire while retaining the smooth OEM ride and driveability. The ReadyLift Smart Suspension Technology is used to make this
kit very user friendly to install, requiring no cutting or drilling. Professional installation time is estimated at 1-2 hours. Like all other ReadyLift kits, this is guaranteed for life against manufacturing defects.
Features:
1.5" Front Lift
CNC-Machined Billet
Max Reccomended Tire Size: 35"
Note: Fits Single Rear Wheel Trucks ONLY--Not Dual Rear Wheels
The ReadyLift 66-2299 2" Leveling Kit is an easy way to lift the front end of your 1999-2016 Ford F-250/350 2WD Pickup. Using our time tested CNC machined 6061-T6 design technology, ReadyLift has the perfect leveling solution for 2WD Super Duty owners. If you want to level your truck the right way, the only way is with ReadyLift.Featuring a machined aluminum spacer for precision fit and installation. The aluminum construction will not deform or deteriorate over time like other cheap leveling kits on the market. A zinc-plated steel spring retainer stud extender is included to insure proper fit and function. Easy to install while allowing you to maintain use of your factory shocks! Even better is that you now can get the leveling lift you want all while maintaining the factory ride!Features:2" Front Lift Maintains Factory Ride Machined For A Precision FitCompatible with Factory ShocksAlso Fits: 83-96 Bronco II 2/4WD91-94 Explorer/Navajo 4WD81-96 F150 4WD81-96 Bronco 4WDFord Super Duty 1999-UP 2WD
The ReadyLift 66-2516 2.5" Leveling Kit w/ Track Bar Bracket is the ultimate leveling kit for your 08-10 Ford F-250/350 Super Duty. This kit not only includes our popular 2.5" front coils spring spacers and sound isolators, but it also includes shock extensions, bump stop extension and our now famous Track Bar Relocation Bracket.
Our OEM-style track bar relocation bracket has been designed to correct the track bar position. On some trucks the owners may experience odd steering pull to the right or left when driving after installing a leveling kit. This track bar bracket can help eliminate that sensation by putting the track bar back to the factory angle.
ReadyLift's Smart Suspension Technology is used to make this kit very user friendly to install requiring no cutting. Professional installation time is estimated at 2.5 hours.
Features:
2.5" Front Lift
Retains Factory Ride
Retains Factory Steering
Max Recommended Tire Size: 37"
Includes Coil Spacers and Track Bar Bracket
The ReadyLift T6-2111 1.5" T6 Billet Leveling Kit for your 2005-2019 Ford F-250/350 4WD is the perfect combination of style, form and function while providing you with a leveled stance. ReadyLIFT T6 Billet Suspension leveling kits are Made in the USA using only premium 6061 T6 aircraft billet aluminum. This ReadyLift T6-2111 Leveling Kit includes 1.5" CNC-machined 6061 T6 billet aluminum lower spring spacers and hardware. The T6-2111 2005-UP Ford F-250/350 Super Duty 4WD lower coil spring spacer leveling kit is available in Black and Silver tough anodized finishes with the name of the leading leveling and lift kit manufacturer, ReadyLift Suspension, laser etched onto the side. The ReadyLIFT T6-2111 2005-UP Ford F-250/350 Super Duty 4WD lower coil spring leveling kit gives 1.5" of front lift by installing under the factory front coil spring and attaching directly to the axle pad. 1.5" of lift will give 2005-2010 F-250/350 trucks a near level stance. 2011-up model F-250/350 trucks will sit level when using the T6-2111 1.5" leveling kit. This lift allows the 2005-UP Ford F-250/350 Super Duty 4WD owner to install up to 35" tall off road tires without concern for clearance issues. ReadyLift T6 Billet coil spring spacers will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed!Installation is simple and requires no cutting or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLift can be installed in one to two hours and costs less than the price of a single custom wheel. Features: 1.5" Front Lift Allows For Up To 35" Tires Billet T6 Aluminum Construction
Lift the front of your 2005-2019 Ford F-250/350 Super Duty Pickup with the Tuff Country 22970 2.5" Leveling Kit. This 2.5" Coil Spacer lifts the front of your truck making it level with the rear. This gives you more room for larger tires and more and fender clearance. Designed to work with existing suspension components, this coil spacer simply installs on top of your factory coil springs and maintains a factory ride.Features: Levels Front and RearMaintains Factory-Like Ride Recommended Tire Size: 33x12.50 Limited Lifetime Wararnty Application Notes: New front shocks required for leveling kit.Some models will require a track bar drop bracket. Part #22971 for 2005-2007 models and #22972 for 2008-2018 modelsShock Application Guide: SX6000 Series - Front# 62262, Rear# 62301SX8000 Series - Front# 61262, Rear# 61301