0
No Products
RedHead Steering Gears 2757 Steering Box (2-Bolt Cover)
PART#
2757 | SKU RH2757
★★★★★
Vehicle Fitment For:
1980-1997 Ford F-250/350 (2-Bolt Top Cover - 32 Spline)
See full application list below
$326.00
FREE Delivery by ,
If you order within hr min
This product cannot be shipped to your destination
Not Shipping to ?
Need it faster?
Description
Gain control of your vehicle with proper steering when you add the RedHead Steering Gears 2757 Steering Box (2-Bolt Cover) to your 1980-1997 Ford F-150/250/350 (For Trucks With 2-Bolt Top Cover). Each Steering Box is built for a direct-fit installation that fits in the factory location. Family owned and operated, RedHead has more than 40 years of experience specializing in steering boxes. Remanufactured from quality materials, each RedHead Steering Box is built to be stronger than the OE unit.
HOW DO I BLEED, OR PURGE AIR, FROM MY STEERING GEAR BOX SYSTEM?
1. After installing the gearbox, fill the system with fluid.
2. Raise the front wheels off the ground, do not start the vehicle.
3. Work the steering wheel back and forth, lock to lock, 15-20 times.
4. Leave the vehicle sit (overnight is best) at least 2 hours
5. Top the pump reservoir off again.
6. Work the steering wheel back and forth again 7-10 times
7. Have a person in the vehicle and another at the pump reservoir with a container of fluid & funnel ready to pour if necessary.
8. Instruct the person in the vehicle to start the engine. As soon as this happens, if the fluid level drops, be ready to pour in more fluid. The level must be kept at an almost full level or it will suck in air again.
9. If this procedure is followed properly, the air problem will be solved.
Features:
- Remanufactured
- Direct-Fit Replacement
- Meets & Exceeds Factory Specs
- Shafts Are Flame Sprayed Or Replaced As Needed
- New Control Valves Installed On Some Applications
- Housing Are Machined And Needle Bearings Installed
- Sealing Surface Polished To A Higher Polish Than New
- Sector Shaft Checked On A Lathe For Straight And True
- Worm And Piston Assembled With New Precision Fit Steel Ball Bearings
SPECIFICATIONS:
Ratio: 18:1 (4 Turns)
Input: Single Flat, 29 Splines
Output: 32 Spline (Offset)
Fittings: Flare
Ratio: 18:1 (4 Turns)
Input: Single Flat, 29 Splines
Output: 32 Spline (Offset)
Fittings: Flare
Weight: 33.00 lbs
Notes:
Fits 1980-1997 Ford F-series Pickup Trucks, Vans, Broncos, Explorers or Mazda pickup trucks.
For 1997 Please Check Top Cover Bolts. This Unit Has 2.
Common Questions
1. After installing the gearbox, fill the system with fluid.
2. Raise the front wheels off the ground, do not start the vehicle.
3. Work the steering wheel back and forth, lock to lock, 15-20 times.
4. Leave the vehicle sit (overnight is best) at least 2 hours
5. Top the pump reservoir off again.
6. Work the steering wheel back and forth again 7-10 times
7. Have a person in the vehicle and another at the pump reservoir with a container of fluid & funnel ready to pour if necessary.
8. Instruct the person in the vehicle to start the engine. As soon as this happens, if the fluid level drops, be ready to pour in more fluid. The level must be kept at an almost full level or it will suck in air again.
9. If this procedure is followed properly, the air problem will be solved.
WHAT POWER STEERING FLUID SHOULD I USE?
RedHead highly recommends using the same fluid that the manufacturer of your
vehicle recommends. It is always best to use a name-brand fluid. Their
power steering gears are tested under pressure with Dexron 3 ATF before
they leave the factory. If you decide to change from what the manufacturer
recommends then Dexron 3, or comparable fluid, is an acceptable alternative.
ARE REDHEAD GEARBOXES SENT OUT IN CENTER POSITION?
Yes, they are sent out on center.
Manufacturer Warranty*:
1 Year / Unlimited Mileage
1 Year / Unlimited Mileage
Instructions & Tech Info
Installation Info
Recommended Specialty Tool
Reviews For RedHead Steering Gears 2757
Overall Rating
/5
1 Review
Rating Snapshot
1
0
0
0
0
Verified Buyer
Redhead
Josh (Boise) | August 24th, 2021
This is my 3rd redhead box in all different cars I have installed hundreds of steering boxes and redhead is simply the best there is better than stock turned my truck from 4 in of play to steering like a new truck very fast shipping also!
Write a Review
Review this product and help other XDP customers make informed decisions!
Frequently Asked Questions
Does this work on 7.3 diesel?
Yes, the RedHead Steering Gears 2757 Steering Box (2-Bolt Cover) works on both gas and diesel applications.
What is the torque spec for the pitman arm on a 1996 Ford F250?
The torque spec for the pitman arm is 190-230 ft-lbs.
Ask A Question
Ask a question about this product
Please allow up to 1 business day for reply.
Specifications For RedHead Steering Gears 2757
MPN
2757
SKU
RH2757
ID
105646
Manufacturer Name
RedHead Steering Gears
Shipping Weight
33.00 lb.
Shipping Length
9 in.
Shipping Width
11 in.
Shipping Height
13 in.
Fuel Type
Diesel / Gas
Manufacturer Warranty*
1 Year / Unlimited Mileage
Prop 65
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
Internal
L2R7
ITEM ADDED TO CART
Complete the job with these highly suggested add-on products.
Product prices marked with an * may require additonal fees, such as a core charge, which will be displayed in the cart.