Update the steering on your Dodge Ram 2500/3500 with the
RedHead Steering Gears 2879U 6-Bolt Steering Box Upgrade Kit. This kit upgrades
the OE 4-bolt steering box to the heavier duty 6-bolt steering box. The 6-bolt
box has a larger sector shaft which helps address the issue of sloppy steering
you may feel when running larger wheels and tires. Due to the larger sector
shaft in the 6-bolt steering box this kit includes the correct pitman arm and
tie rod end needed for installation
Features:
- Upgrade Kit
- Pitman Arm & Tie Rod End Included
- Upgrades The 4-Bolt Box To The 6-Bolt Box
- Works With Trucks That Are Lifted 0-3 Inches
HOW DO I BLEED, OR PURGE AIR, FROM MY STEERING GEAR BOX SYSTEM?
1. After installing the gearbox, fill the system with fluid.
2. Raise the front wheels off the ground, do not start the vehicle.
3. Work the steering wheel back and forth, lock to lock, 15-20 times.
4. Leave the vehicle sit (overnight is best) at least 2 hours
5. Top the pump reservoir off again.
6. Work the steering wheel back and forth again 7-10 times
7.
Have a person in the vehicle and another at the pump reservoir with a
container of fluid & funnel ready to pour if necessary.
8.
Instruct the person in the vehicle to start the engine. As soon as this
happens, if the fluid level drops, be ready to pour in more fluid. The
level must be kept at an almost full level or it will suck in air again.
9. If this procedure is followed properly, the air problem will be solved.
Note:
If you have a truck that is lifted larger than 3 Inches, the pitman arm provided is not recommended.
You will need to purchase a drop pitman arm that will work with the larger sector shaft of the steering box and the lift height on your truck.