South Bend Dyna Max Upgrade Clutch (Single Mass Flywheel Kit) MU1944

1999-2003 Ford 7.3L Powerstroke F250-450 w/6 speed transmission

Part #:

★★★★★ ★★★★★ 1 Reviews

FROM 582

Our Recommendations Compatible Products

Part #: {{:: (product.sku == undefined) ? product.code : product.sku }}

View Details

Authorized Dealer

Solid Flywheel Conversion Kits

Con O stands for performance Organic linings,
OFE stands for a combination of Organic & Feramic linings,
FE stands for all Feramic linings on the clutch disk.
The pressure plates have been modified for a higher plate load.

All clutch kits include everything needed to do the job including our Kevlar� pilot bushing.

Our part numbers are as follows:

1999-2003 Power Stroke - 1944-6K- Stock Power
1999-2003 Power Stroke - 1944-6OK - 375 hp, 750 ft lbs of torque
1999-2003 Power Stroke - 1944-6OKHD - 425 hp, 800 ft lbs of torque
1999-2003 Power Stroke - 1944-6OFEK - 475 hp, 900 ft lbs of torque

Options Available:

1. Con O - Using 2 Performance Organic Facings (Smooth engagement)
2. Con OFE - Using 1 Performance Organic & 1 Feramic Facing (Moderate engagement)
3. Con FE - Using 2 Feramic Facings (Possible rough engagement)

KEVLAR� Pilot Bushing

The nylon KEVLAR� composite absorbs the vibration that the Ford diesels create. This bushing can also be used as a repair bushing to run with a scored input shaft thus saving dollars on the cost of a new input shaft.

With all our Ford clutch kits, a Kevlar pilot bushing will be included. This is a $40 value!

Important

This clutch design will offer a very soft pedal. When truck is modified and under load the clutch pedal may stick to the floor.

Remedy

Remove the helper spring on the clutch pedal. By doing this, it will not only firm the clutch pedal up some, but resolve any clutch pedal inversion problems.

Product Options

PART NUMBER	POWER RANGE
1944-6K	1944-6K - Stock Power
1944-6OK	1944-6OK - 375HP & 750 Ft-Lbs.
1944-6OFEK	1944-6OFEK - 475HP & 900 Ft-lbs.
1944-6OKHD	1944-6OKHD - 425HP & 800 Ft-Lbs.

Manufacturer Name South Bend Clutch
Shipping Weight 90.00 lb.
Shipping Length 20 in.
Shipping Width 20 in.
Shipping Height 8 in.
Fuel Type Diesel
Warranty Yes
Warranty Info 1 Year / 12,000 Mile
Prop 65 WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

★★★★★ ★★★★★

3.00/5 Stars out of 1 Reviews

5 ★

4 ★

3 ★

2 ★

1 ★

A few months later and already a problem

★ ★ ★ 3

Austin (Ohio) | November 28th, 2011

I bought this clutch about 5 months ago and it is a great clutch and a much softer peddle. However the KEVLAR bushing has already failed and needs to be replaced

Customer Photos

See what others built Submit your photo

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

Under load my MU1944 chatters going forward & reverse, any suggestions? MU1944 installed 7/13 about 5K since. Under Load it chatters going forward some,reverse chatters real bad. Any suggestions on what the I need to do?

View Staff Answer

Answer
The Superchips tuning can be run on a stock vehicle. However, it is highly recommended that you install an intake and exhaust system to really maximize the performance that you’ll get with a tuner.

Which MU1944 Kit do you have installed? If it's the Feramic linings, you'll notice the chatter as it's just part of the design. South Bend Clutch suggests that when backing up with a load you put the truck in low range and take your time. Along with going forward it's important to make sure you are in your first forward gear.

Does this come with a flywheel Dose this come with a flywheel

View Staff Answer

Answer

Yes, the SOUTH BEND DYNA MAX UPGRADE CLUTCH (SINGLE MASS FLYWHEEL KIT) MU1944 will include a single mass flywheel.