Volant 19860 Air Intake System

Overall nice product, but installation on an 06 F350 was pretty bad. Installation instructions...forget about them cause there is none. Had to call the tech support number to find out that for my model you have to cut off the pipe just behind the MAF sensor, and you dont use the coupling that comes with kit, you must reuse the original Ford. After completing that task, found that the holes dont line up exactly in the housing and must be enlarged to bolt together. Next prob, they didnt allow enough clearance for the factory battery cover, so getting the lid on was really time consuming. Like the product, but the install was difficult. Also fo rmy model there were no instructions, only a schematic of the parts.

Great system, I have a 2007 F350 and on the 06,07 models they have a 1 piece tube off of the turbo and the volant system here is made for the 2 piece tube off of the turbo and in the instruction they don't tell you that you have to cut the new tube off just behind the MAS, and use the ford factory turbo tube to connect it all together, you do not use the volant rubber coupling at all, and the bolt holes on the intake housing need to be enlarged a little more to get it all lined up and bolted together and look clean. IT just would have been nice to know all this or if the people at volant would fix it before they send the produced out to the dealers and then out to the customers. Hope this is helpful to anyone that is having trouble with this produced.