Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}

Shibby Engineering

New Product Filters!
Hide Info
Shibby Engineering
Shibby Engineering makes many specialty and electronic components for your Dodge Cummins. Available in a wide variety of configurations, XDP offers the lowest prices and free shipping on orders over $50!
Shibby Engineering 2007BYPLUG EGR Cooler Bypass Valve Plugs 17136 1.00 Shibby Engineering 2007BYPLUG EGR Cooler Bypass Valve Plugs
$ 15.63
Shibby Engineering EGR Cooler Bypass Valve Plugs not only provide a clean look, but also protect your OE harness connectors from corrosion and debris when the factory EGR Cooler Bypass Valve is disconnected. Features:"Blocks-Off" EGR Cooler Bypass Valve ConnectorsFactory Style Connectors Provide Clean, OE Look
Shibby Engineering 2007C&CTPLG Cab & Chassis EGR Temp Sensor Plug 17123 1.00 Shibby Engineering 2007C&CTPLG Cab & Chassis EGR Temp Sensor Plug
$ 9.69
Shibby Engineering EGR Temp Sensor Plug not only provides a clean look, but also protects your OE harness connector from corrosion and debris when the factory Exhaust Gas Recirculation Temp Sensor is removed while using off-road tuning. Features: "Blocks-Off" EGR Temp Sensor Harness Connector Factory Style Connector Provides Clean, OE LookFor Use w/ Off-Road Tuning Only
Shibby Engineering 2007COMPC&C Cab & Chassis EGR Race Track Kit 17103 1.80 Shibby Engineering 2007COMPC&C Cab & Chassis EGR Race Track Kit
$ 78.75
The Shibby Engineering Complete EGR Race Track Kit is designed to remove the EGR Valve and Cooler from your 6.7L Cummins. Kits come complete with all block-off plates, gaskets and required hardware for installation. Features: Includes New Gaskets Uses Factory Hardware Allows EGR System Removal For Off-Road Use Only Note: Off-road tuning required for use.
Shibby Engineering 2007EGT100 100 Ohm EGT Sims 17137 1.00 Shibby Engineering 2007EGT100 100 Ohm EGT Sims
$ 56.25
The Shibby Engineering 100 Ohm Sims will keep the ECM from commanding a regeneration by elevating temperatures far above what the ECM should see. Because of this, upon installation the 100 Ohm sims will also throw an immediate check engine light.Features: Disables Regeneration 100 Ohm Simulators Requires DPF Race Pipe For Off-Road Use OnlyDPF Pressure Sim May Be RequiredTech Notes:These items are for off-road, closed-course, race use only. There are no guarantees that these items will allow "code-free" operation. On some calibrations, vehicles will require a DPF pressure sim to avoid having a "see dealer now" message in the driver info center. Unfortunately, due to constant changes from Dodge, there is no way to track down what trucks will or will not need the pressure sim. For this reason it's recommended that you purchase it. There should be no negative effects if the sim is installed on a truck that doesn't actually require it.
Shibby Engineering 2007EGT330 330 Ohm EGT Sims 17138 1.00 Shibby Engineering 2007EGT330 330 Ohm EGT Sims
$ 56.25
The Shibby Engineering 330 Ohm Sims will elevate the catalyst temperature to the highest safe limit within ECU programming. The causes DPF counter to slow down considerably but the truck will still go into regeneration.Features: Slows Down Regen. Counter330 Ohm Simulators For Off-Road Use OnlyDPF Pressure Sim May Be RequiredTech Notes:These items are for off-road, closed-course, race use only. There are no guarantees that these items will allow "code-free" operation. On some calibrations, vehicles will require a DPF pressure sim to avoid having a "see dealer now" message in the driver info center. Unfortunately, due to constant changes from Ram, there is no way to track down what trucks will or will not need the pressure sim. For this reason it's recommended that you purchase it. There should be no negative effects if the sim is installed on a truck that doesn't actually require it.
Shibby Engineering 2007EGTPLUG 2007.5-2009 EGT Sensor Plugs 17129 2.00 Shibby Engineering 2007EGTPLUG 2007.5-2009 EGT Sensor Plugs
$ 18.75
Shibby Engineering EGT Sensor Plugs not only provide a clean look, but also protect your OE harness connectors from corrosion and debris when the factory Exhaust Gas Temperature (EGT) Sensors are removed while using off-road tuning. Features: "Blocks-Off" EGT Sensor Harness Connectors Factory Style Connectors Provide Clean, OE LookFor Use w/ Off-Road Tuning Only
Shibby Engineering 2007MSBT Mild Steel Boost Tube 17118 10.00 Shibby Engineering 2007MSBT Mild Steel Boost Tube
$ 143.75
The Shibby Engineering Mild Steel Boost Tube is designed to replace your factory intercooler tube. Constructed from 3.5" mandrel bent mild steel, the Boost Tube increases efficiency, spool-up and throttle response. Comes non-coated in raw material finish. Fits stock intake elbow, Shibby Intake Elbow, Shibby Throttle Valve Delete and other aftermarket 3.5" intake elbows. Features: Direct Factory Replacement3.5" Mandrel Bent Mild Steel Couplers and Clamps IncludedNote: Mild steel will rust. Pipe must be coated inside and out with your choice of paint or powdercoat before installation.
Shibby Engineering 2007SMTYPLG Smarty Harness Plugs 17162 1.00 Shibby Engineering 2007SMTYPLG Smarty Harness Plugs
$ 50
The Shibby Engineering Harness Plugs are designed for use on a truck that is running off-road Smarty "ME" Tuning. The plug-in connectors simply snap together on the existing exposed connectors and provide a clean look, as well as protection from the elements and road debris. Features: Easy Installation and Removal Keeps Factory Connectors Clean Provides a Clean, Finished LookNote: For Use w/ Smarty Off-Road Tuning
Shibby Engineering 2007SSBT Stainless Steel Boost Tube 17117 10.00 Shibby Engineering 2007SSBT Stainless Steel Boost Tube
$ 181.25
The Shibby Engineering Stainless Steel Boost Tube is designed to replace your factory intercooler tube. Constructed from 3.5" mandrel bent stainless steel, the Boost Tube increases efficiency, spool-up and throttle response. Comes non-coated in raw material finish. Fits stock intake elbow, Shibby Intake Elbow, Shibby Throttle Valve Delete and other aftermarket 3.5" intake elbows. Features: Direct Factory Replacement3.5" Mandrel Bent Stainless Steel Couplers and Clamps Included
Shibby Engineering 2007STGII Stage II Intake System 17121 10.00 Shibby Engineering 2007STGII Stage II Intake System
$ 412.5
The Shibby Engineering Stage 2 Air Intake Elbow upgrade is designed to replace the restrictive factory intake elbow. By removing the EGR Mounting bosses and creating a smoother flow, the Shibby Stage II Intake Elbow increases torque, horsepower and flow. For additional gains the Throttle Valve Delete can also be used (sold separately). Features: Increase Efficiency, Horsepower and TorqueCast Aluminum Construction Installation Hardware Included5 Pre-Drilled and Tapped Ports w/ PlugsNote: EGR Race Track Kit and off-road tuning required for use.
Shibby Engineering 2007STGIIC&C Stage II Cab & Chassis Intake 17122 10.00 Shibby Engineering 2007STGIIC&C Stage II Cab & Chassis Intake
$ 412.5
The Shibby Engineering Stage 2 Air Intake Elbow upgrade is designed to replace the restrictive factory intake elbow. By removing the EGR Mounting bosses and creating a smoother flow, the Shibby Stage II Intake Elbow increases torque, horsepower and flow. For additional gains the Throttle Valve Delete can also be used (sold separately). Features: Increase Efficiency, Horsepower and TorqueCast Aluminum Construction Installation Hardware Included5 Pre-Drilled and Tapped Ports w/ PlugsNote: EGR Race Track Kit and off-road tuning required for use.
Shibby Engineering 2007TEMPPLG EGR Temp Sensor Plug 17134 1.00 Shibby Engineering 2007TEMPPLG EGR Temp Sensor Plug
$ 9.69
Shibby Engineering EGR Temp Sensor Plugs not only provide a clean look, but also protect your OE harness connectors from corrosion and debris when the factory EGR Temp Sensor is disconnected.Features:"Blocks-Off" EGR Temp Sensor ConnectorFactory Style Connectors Provide Clean, OE Look
Shibby Engineering 2007TVPLG Throttle Valve Plugs 17131 2.00 Shibby Engineering 2007TVPLG Throttle Valve Plugs
$ 15.63
Shibby Engineering Throttle Valve Plugs not only provide a clean look, but also protect your OE harness connectors from corrosion and debris when the factory Throttle Valve Sensors are disconnected.Features:"Blocks-Off" Throttle Valve Harness ConnectorsFactory Style Connectors Provide Clean, OE Look
Shibby Engineering 2007XRTPLG H&S Tuner Harness Plugs 17161 1.00 Shibby Engineering 2007XRTPLG H&S Tuner Harness Plugs
$ 56.25
The Shibby Engineering Harness Plugs are designed for use on a truck that already has an HandS Race Tuner. The plug-in connectors simply snap together on the existing exposed connectors and provide a clean look, as well as protection from the elements and road debris. Features: Easy Installation and Removal Keeps Factory Connectors Clean Provides a Clean, Finished LookNote: For Use with HandS Race Tuners Only
Shibby Engineering 2009TEMPPLG EGR Temp Sensor Plug 17135 1.00 Shibby Engineering 2009TEMPPLG EGR Temp Sensor Plug
$ 9.69
Shibby Engineering EGR Temp Sensor Plugs not only provide a clean look, but also protect your OE harness connectors from corrosion and debris when the factory EGR Temp Sensor is disconnected.Features:"Blocks-Off" EGR Temp Sensor ConnectorFactory Style Connectors Provide Clean, OE Look
Shibby Engineering 2009TVPLUG Throttle Valve Plugs 17132 2.00 Shibby Engineering 2009TVPLUG Throttle Valve Plugs
$ 21.88
Shibby Engineering Throttle Valve Plugs not only provide a clean look, but also protect your OE harness connectors from corrosion and debris when the factory Throttle Valve Sensors are disconnected.Features:"Blocks-Off" Throttle Valve Harness ConnectorsFactory Style Connectors Provide Clean, OE Look
Shibby Engineering 2010EGT100 100 Ohm EGT Sims 17139 1.00 Shibby Engineering 2010EGT100 100 Ohm EGT Sims
$ 68.75
The Shibby Engineering 100 Ohm Sims will keep the ECM from commanding a regeneration by elevating temperatures far above what the ECM should see. Because of this, upon installation the 100 Ohm sims will also throw an immediate check engine light. Features: Disables Regeneration 100 Ohm Simulators Requires DPF Race Pipe For Off-Road Use OnlyDPF Pressure Sim May Be RequiredTech Notes:These items are for off-road, closed-course, race use only. There are no guarantees that these items will allow "code-free" operation. On some calibrations, vehicles will require a DPF pressure sim to avoid having a "see dealer now" message in the driver info center. Unfortunately, due to constant changes from Ram, there is no way to track down what trucks will or will not need the pressure sim. For this reason it's recommended that you purchase it. There should be no negative effects if the sim is installed on a truck that doesn't actually require it.
Shibby Engineering 2010EGT330 330 Ohm EGT Sims 17140 1.00 Shibby Engineering 2010EGT330 330 Ohm EGT Sims
$ 68.75
The Shibby Engineering 330 Ohm Sims will elevate the catalyst temperature to the highest safe limit within ECU programming. The causes DPF counter to slow down considerably but the truck will still go into regeneration. Features: Slows Down Regen. Counter330 Ohm Simulators Requires DPF Race Pipe For Off-Road Use OnlyDPF Pressure Sim May Be RequiredTech Notes:These items are for off-road, closed-course, race use only. There are no guarantees that these items will allow "code-free" operation. On some calibrations, vehicles will require a DPF pressure sim to avoid having a "see dealer now" message in the driver info center. Unfortunately, due to constant changes from Ram, there is no way to track down what trucks will or will not need the pressure sim. For this reason it's recommended that you purchase it. There should be no negative effects if the sim is installed on a truck that doesn't actually require it.
Shibby Engineering 2010EGTPLG 2010+ EGT Sensor Plugs 17130 2.00 Shibby Engineering 2010EGTPLG 2010+ EGT Sensor Plugs
$ 18.75
Shibby Engineering EGT Sensor Plugs not only provide a clean look, but also protect your OE harness connectors from corrosion and debris when the factory Exhaust Gas Temperature (EGT) Sensors are removed while using off-road tuning. Features: "Blocks-Off" EGT Sensor Harness Connectors Factory Style Connectors Provide Clean, OE LookFor Use w/ Off-Road Tuning Only
Shibby Engineering 2010MSBT Mild Steel Boost Tube 17116 10.00 Shibby Engineering 2010MSBT Mild Steel Boost Tube
$ 143.75
The Shibby Engineering Mild Steel Boost Tube is designed to replace your factory intercooler tube. Constructed from 3.5" mandrel bent mild steel, the Boost Tube increases efficiency, spool-up and throttle response. Comes non-coated in raw material finish. Fits stock intake elbow, Shibby Intake Elbow, Shibby Throttle Valve Delete and other aftermarket 3.5" intake elbows. Features: Direct Factory Replacement3.5" Mandrel Bent Mild Steel Couplers and Clamps IncludedNote: Mild steel will rust. Pipe must be coated inside and out with your choice of paint or powdercoat before installation.
TAKE 10% OFF SITEWIDE* WITH OUR MEMORIAL DAY SALES EVENT!

Enter the code at checkout and a 10% discount will be applied to your order.

USE CODE: MEMORIAL10

Valid for all orders over the phone or online, *excluding the manufacturers listed in the company policy. You will still receive FREE SHIPPING on purchases over $50! This promotion is valid now - 5/28/19 only.