Products Showing Parts for — {{ active_vehicle.name }}

No Results Showing Parts for — {{ active_vehicle.name }}
USD 645
Part #: PTA4SPBC088

AirDog A4SPBC088 150GPH Air/Fuel Separation System

2001-2010 GM 6.6L Duramax (Moderate To Extreme)
Part #: PTA4SPBC088
★★★★★ ★★★★★ 4 Reviews
$645.00
Temporarily Out of stock - More on the way!

An Email Will Be Sent With Expected Shipping Date After Purchase

SHARE
Our Recommendations Compatible Products
Close
Scroll to View More

Description



The PureFlow AirDog A4SPBC088 150GPH Air/Fuel Separation System for your 2001-2010 GM 6.6L Duramax provides the most effective technology designed specifically for diesel pickups to remove water, particulates, vapor and entrained air from diesel fuel. The AirDog is lift pump and filter system, that enhances the fuel delivery to your engine with a commercial duty system.

Your High Performance diesel engine demands higher fuel flows. Yet higher fuel flows increase the vacuum at the fuel pump and agitation in the fuel tank. These factors generate additional air/vapor in the fuel system preventing your engine form producing maximum power and efficiency. Additionally, air/vapor can cause galling and pitting of the injector barrel/plunger assembly and also tip erosion. The AirDog eliminates air in the fuel that robs your engine of consistently greater performance and can also cause permanent damage to your injectors. The AirDog also provides the fuel pressures and flows your diesel engine needs to produce maximum power, any time, every time!

The Airdog works by pulling fuel from the fuel tank containing entrained air/vapor, particulate contaminates and unknown quantities of moisture. The fuel passes through the water separator which removes the water and large particulate contaminates. Then, the fuel with only entrained air/vapor and tiny particulate contaminates remaining, enters the fuel pump. Under positive pressure flow, the fuel passes through the fuel filter and the remaining particulate contaminates are caught and contained, the entrained air/vapor is also separated and returned to the tank. The clean fuel is now free of contaminants and water and flows at the proper pressures up to your engine. Each kit includes plumbing, hardware, wiring harness, mounting bracket and all components needed for installation.  

Features: 


  • 150 GPH @ 8-10 PSI (Stock-800HP)
  • Removes Air & Water From Fuel 
  • Increased Horsepower & Torque 
  • Optimized Engine Performance 
  • Improved Throttle Response 
  • Increased Fuel Economy 
  • Lifetime Limited Express Warranty

 

Specifications

  • MFG. Number A4SPBC088
  • Manufacturer Name AirDog by PureFlow
  • Shipping Weight 27.00 lb.
  • Shipping Length 19 in.
  • Shipping Width 13 in.
  • Shipping Height 7 in.
  • Fuel Type Diesel
  • EO Number D-595-3
  • UPC 813094015887
  • Warranty Yes
  • Warranty Info Limited Lifetime

Reviews

★★★★★ ★★★★★
5.0/5 Stars out of 4 Reviews
5
4
4
0
3
0
2
0
1
0
Great Product
5
(Michigan) | July 8th, 2020
This system is a no brainer. The install process is not the easiest so make sure you have help. Overall the product made my truck run better then it ever has
Worth every penny
5
(Wisconsin) | May 15th, 2020
If this is the your first time installing one of these. Make sure you look you do the research for install or have someone help you, who knows what they are doing. The instructions (for me) were not the best and the pictures were so close up. That it's hard to get your bearings on where the picture was taken. Other then that I would not hesitate on buying this product. It's worth every penny.
To Clayton who called it worthless.
5
(Diesel Addiction) | January 5th, 2010
This system is a lift pump, in my opinion one of the best out there for the money. You are right it pressurizes the fuel system to make sure the CP3 has a constant supply of fuel. I have sold an installed dozens of these and they do they're job well from the stock Duramax's I have running mid 12s and dynoing over 550hp to my truck that runs 11.1s and dynos over 820hp.
Pages 1   2

Write a Review

Include Your Order Number For a Chance to Win a $100 Gift card

Overall Rating

Your Information

Email Address will not be made public.

Customer Photos

Customer Photos

See what others built Submit your photo

Questions and Answers

Ask XDP a Question about this product (Allow 24-48 hours for reply)

Most Popular Questions

When do I need to change my filters?
View Staff Answer 
Answer

The life expectancy for the AirDog Filter could be up to 25K miles or a year. However, those figures can change drastically depending on fuel quality.

Is you factory fuel filter nessecary if you install the AirDog?
View Staff Answer 
Answer

We generally recommend installing the XD163 to remove the factory fuel filter. The XD163 was specially designed as a bolt-on replacement, the XDP Fuel Filter Delete simply installs in place of your factory fuel filter when using aftermarket fuel systems such as an Airdog, FASS, or custom applications where your factory fuel filter is no longer needed. (Click Here)

Do i need the stock filter delete if I use this system?
View Staff Answer 
Answer
It's personal preference. The factory filter isn't required after the installation of an AirDog filtration system. However, there are plenty that still run the stock filter on their truck.
Does the AirdogFP-150 have a fuel pressure sensor for a fuel pressure gauge
View Staff Answer 
Answer
The AirDog A4SPBC088 150GPH Air/Fuel Separation System do not come with a fuel sensor but they do have a port on the side of the fuel block where you can read fuel pressure from.
XDP continues to closely monitor the COVID-19 (Coronavirus) outbreak. As an integral part of the automotive supply chain, at this point all call centers and distribution centers remain fully operational to ensure we keep vital service components flowing to vehicles used in transport of goods and emergency response. To ensure the health of our employees, families, and customers, we have made the following procedural changes:

  • UPDATE: Effective 6/1 Customer Service resumes normal business hours of M-F 8:30 – 9:00pm EST.
  • Effective 3/18 we have decided to temporarily close both of our retail stores in NJ and NV.
  • Our technical sales team remains available Mon-Fri 8:30am-9pm and Saturday 10:30am-7pm EST.
  • All employees have been encouraged to follow the CDC's recommendations at home and in the workplace.
The circumstances of this virus are fast moving, as such, we will continue to update you with any further operational adjustments as needed. As always, we value your business and appreciate your patience as we manage this situation together.