0
No Products
Banks Power 66797 Derringer Tuner With iDash DataMonster
PART#
66797 | SKU BP66797
Vehicle Fitment For:
2020-2023 Ram 1500 3.0L EcoDiesel | 2020-2023 Jeep Wrangler JL 3.0L EcoDiesel | 2021-2023 Jeep Gladiator JT 3.0L EcoDiesel
See full application list below
NOTES: When running multiple iDash together, purchase 1 Primary and 2-3 Expansion gauges. Does not include mount for iDash.
$889.00
FREE Delivery by ,
If you order within hr min
This product cannot be shipped to your destination
Not Shipping to ?
Need it faster?
Description
Add Up To 57 HP & 73 LB-FT Torque
The Banks Power 66797 Derringer Tuner With iDash DataMonster from XDP makes it easy to add 57 horsepower and 73 lb-ft of torque to your Ram 1500, Jeep Wrangler, or Jeep Gladiator 3.0 EcoDiesel and monitor your engine/transmission vitals. This module offers more torque and power gains across the RPM range, starting from idle all the way to the shift points of your transmission. The Derringer is dyno tuned to use data inputs such as throttle position, coolant temperature, vehicle speed, AFR, RPM, and EGT just like ECM your engine uses. This continually optimizes the tunes in real-time due to its OBD-II connectivity, unlike it’s competitors.
The Derringer module offers 6 levels that can be adjusted on-the-fly using the DataMonster to deliver best-in-class performance. Level 3 is designed for work, such as hauling a fully loaded trailer to improve the on-ramp merging speeds and passing times.The Derringer works with other Banks devices such as the PedalMonster throttle booster to enhance the throttle feel even further. This module is installed in line with your truck's engine sensors and plugs into the vehicle's OBD-II diagnostic bus.
The ActiveSafety feature watches the overall health of the circuitry and monitors the engine and transmission. By analyzing the module’s health 100 times per second, the Derringer can immediately bypass itself if there is a problem. Once an issue is detected, the Derringer sets a device diagnostic code and returns the truck back to factory power. Also, the coolant temperature monitoring stops power being added when the engine is overheated or too cold. Safe power is easy with a Derringer; just choose your favorite power setting and enjoy the ride.
Power Levels
- 2020-2023 Ram 1500 +57HP & 73 Lb-Ft
- 2020-2023 Jeep Wrangler JL +57HP & 73 Lb-Ft
- 2021-2023 Jeep Gladiator JT +57HP & 73 Lb-Ft
Features:
- Adds Up To 57 HP & 73 Lb-Ft
- 1 Second Faster 0-60 Time
- TransCommand Protects Transmission
- Display DPF Regen Status And Def Level
- ActiveSafety Protects Engine/Powertrain
- Each Level Adds Approximately 10 hp Each
- 4.3 Truck Length Lead In In The 1/4 Mile
- Tune Works Seamlessly While In Cruise-Control
- AutoRate Tunes In Realtime Using Vehicle Diagnostics
- iDash Displays 5 Custom Pages Of 2-8 Gauges Per Page
- Update Derringer Firmware Through iDash MicroSD Card
- DataMonster Logs Up To 20 Min/Max Value Custom Alerts
- Supplied SD Card Stores Hundreds Of Hours Of Datalogs
- 6 Power Levels Can Be Changed On-The-Fly With The iDash
- Experience Huge Torque And Horsepower Gains For Tow And Fun
- iDash Shows Real-Time Bar Graph Of Derringers's Added Power
- Interfaces With OBD-II Port To Communicate With The Vehicle
- View Data Logs On iDash Or Transfer To Computer For Analysis
- Warranty Safe: No Reflash Required And No Traces Left In ECM
- Simple Plug-And-Play Install With Easy Removal For Dealer Service
- iDash Displays Temps, Pressures, Speeds, Info Your Dashboard Won't
- iDash Displays Selectable Alerts For Speed, Coolant Temp, Trans Slip, Etc
AutoRate Dynamic Tuning
- Exhaust Gas Temperature (EGT) — Monitors EGT and intelligently modulates fueling to maintain a safe maximum EGT, protecting your turbo and engine.
- Altitude compensation — Senses ambient air pressure, controlling the turbocharger to maintain added boost and power as altitude increases.
- Diesel Particulate Filter (DPF) Regen — Monitors your DPF regen status to ensure the process completes successfully.
- Accelerator Pedal Monitoring — Rolls in additional power progressively, optimizing for both part-throttle fuel economy and max power when you ask for it.
- Full Power Timer — Allows for 30 seconds of wide-open throttle before transitioning to the recommended power level for sustained tow/haul.
- Coolant Temperature Monitoring — Maintains safe power based on coolant temp.
- During warmup, no power is added below 120° F
- Power ramps in & fully available above 150° F
- If the coolant overheats for any reason, the Derringer starts removing its power at 230° F
- Additional power is totally removed if you exceed 240° F
TransCommand Active Transmission Safety System
The Derringer is calibrated to modulate power during shifting while ramping up hydraulic pressure for better engagement. Competitors lack OBD-II data and always add power at wide-open throttle causing excessive transmission, clutch, and torque converter slip and damage.- Intelligent Shift Tuning — Senses ambient air pressure, controlling the turbocharger to maintain added boost and power as altitude increases.
- Boost and Fuel by Gear — Monitors your DPF regen status to ensure the process completes successfully.
- Accelerator Pedal Monitoring — Rolls in additional power progressively, optimizing for both part-throttle fuel economy and max power when you ask for it.
- Tuned Hydraulic Pressure — Allows for 30 seconds of wide-open throttle before transitioning to the recommended power level for sustained tow/haul.
- Torque Converter Clutch (TCC) Monitoring — Maintains safe power based on coolant temp.
- Shift signal is optimized for the power level protecting the transmission, increasing shift speed, and avoiding ECM power derates.
- Calibration is tuned for optimum traction and performance providing the right firmness of shift automatically.
- Ramps hydraulic pressure faster than stock, maintaining engagement as power is added safely within factory limits.
- Adjusts TCC slip to safe levels, lowering fluid temperature, and preventing extended wear.
- Transmission Slip Monitoring - Light throttle shifts remain smooth and firm, full-throttle shifts are solid and decisive.
ActiveSafety Health Monitoring
The Derringer is the only tuner available that includes Active Safety health monitoring circuitry.- Internal diagnostics check system 100 times per second.
- Checks MAP and FRP signals and monitors CPU activity
- Activates in event of failure or loss of 12V power. Bypass relays smoothly return stock power with no loss of power or "Limp Home" Mode.
Manufacturer Warranty*:
1 Year
1 Year
Note:
When running multiple iDash together, purchase 1 Primary and 2-3 Expansion gauges.
Does not include mount for iDash.
When running multiple iDash together, purchase 1 Primary and 2-3 Expansion gauges.
Does not include mount for iDash.
Reviews For Banks Power 66797
No Reviews Yet!
Write a Review
Review this product and help other XDP customers make informed decisions!
Frequently Asked Questions
Where and does the gauge pod mount?
The Banks Power 66797 Banks Derringer Tuner With iDash DataMonster includes a suction cup mount that can be mounted anywhere on the windshield you choose.
Ask A Question
Ask a question about this product
Please allow up to 1 business day for reply.
Specifications For Banks Power 66797
MPN
66797
SKU
BP66797
GTIN
801279667976
ID
81471
Manufacturer Name
Banks Power
Shipping Weight
4.00 lb.
Shipping Length
10 in.
Shipping Width
6 in.
Shipping Height
6 in.
Fuel Type
Diesel
E-Code
2
EO Number
d-161-148
Manufacturer Warranty*
1 Year
Prop 65
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
Internal
L0R0
ITEM ADDED TO CART
Complete the job with these highly suggested add-on products.
Product prices marked with an * may require additonal fees, such as a core charge, which will be displayed in the cart.