0
No Products
Fleece Intake Manifold & Grid Heater Upgrade FPE-CUMM-IHK-0724
PART#
FPE-CUMM-IHK-0724 | SKU FPE-CUMM-IHK-0724
Vehicle Fitment For:
2007.5-2024 Dodge Ram 2500/3500/4500/5500 with 6.7L Cummins Engine
See full application list below
NOTES: Fits dual alternator-equipped trucks.
$599.00
FREE Delivery by ,
If you order within hr min
This product cannot be shipped to your destination
Not Shipping to ?
Need it faster?
Description
The Fleece Intake Manifold & Grid Heater Upgrade FPE-CUMM-IHK-0724 will upgrade the airflow into the engine of your Dodge Ram 2500/3500/4500/5500. This intake horn and high-flow intake plate are direct replacements that increase overall engine airflow and replace the factory-style grid heater with a robust coil heating element.
Simplified and Safer Installation:
This kit fits 2007.5-2024 2500/3500/4500/5500 6.7L applications, making it the broadest-coverage kit on the market. This kit makes it straightforward, as there is no need to worry about whether you’ve selected the right kit for your truck. You don’t need to hunt down gaskets for the job, as this kit includes everything you need. Included in this kit are throttle valve gasket, intake runner gasket, intake horn gasket, EGR valve gasket, and EGR crossover tube gaskets for both regular pickup and Cab & Chassis model trucks. A clearly labeled hardware kit makes it easy to identify and locate all the necessary parts for the installation. Labeled electrical connections make installation a cinch with no guessing which end goes where.
This Intake Manifold & Grid Heater Upgrade does not require the use of any proprietary high-pressure fuel lines; you can reuse your factory high-pressure fuel lines. This kit also allows you to use direct replacement aftermarket options that are available universally from your preferred aftermarket supplier or OE reseller. The heater cables and connections have protective boots that eliminate any risk of accidental contact with an energized circuit, with no exposed connections like other brands on the market.
Cold Weather Performance:
Optimized heater design and placement in the intake air stream ensure you get the most efficient heating possible with a single, 700W heating element. For cold-weather diesel enthusiasts who experience sustained temperatures below 23F (or -5C), the Fleece cold-weather kit includes a 700W heating element. This combination provides proven startability down to -31F (-35C). Protect your truck with confidence with the latest from Fleece Performance. Compared to other kits on the market, this kit reaches the same levels of cold-temperature startability with less wattage and less strain on your grid heater relay!
Recommended Cold Weather Startability Configuration:
Sustained Temperature Fahrenheit (Celsius) / Configuration / Sustained Cold Startability Test
32F (0C) / Single Heater / PASS
23F (-5C) / Single Heater / PASS
5F (-15C) / Cold Weather - Dual Heater / PASS
-13F (-25C) / Cold Weather - Dual Heater / PASS
-31F (-35C) / Cold Weather - Dual Heater / PASS
*All testing was performed on a 2024 Ram 2500 with the block heater in use and sufficiently charged 12V batteries. Oil and weight: Freedom Series 100% Synthetic 10W-30.
Features:
- 1/8" NPT Port For Sensor Installation
- Factory Appearance With The Highest-level Fit & Finish
- Precision Machined, Cast Aluminum High Flow Intake Horn & Plate
- Improves Throttle Response And Airflow With Lower Intake Restriction
- Eliminates The Risk Of Engine Damage From The OE Style Grid Heater Nut Failure
- The Most Complete Kit On The Market - Includes All Necessary Hardware & Gaskets
- Optional, Secondary Heater For Cold Weather Startability Down To -35 Degrees Celsius
- High Flow 700W Coil Heater Along With A New High Flex Heater Cable & New Grounding Cable
- Allows For Reuse Of OE High-Pressure Fuel Lines And Direct Replacement Options – No Proprietary Fuel Line Problems To Worry About
Kit Includes:
Intake Horn
Hardware Kit
EGR Valve Gaskets
Intake Horn Gaskets
Intake Runner Gaskets
Throttle Valve Gaskets
EGR Crossover Tube Gaskets For Both Pickup And C&C Model Trucks
The MAP Sensor on this truck is mounted to the back of the intake elbow, which you will be replacing with this Fleece Intake and Grid Heater Upgrade. While replacement of the MAP Sensor is not required during the installation of this product, soot buildup over time can affect sensor accuracy by interfering with the pressure and temperature readings. For this reason, many take the opportunity to inspect, clean, and replace the MAP Sensor if necessary.
Shipping Restrictions Apply 
This product can not be shipped to these states/provinces: CA
This product can not be shipped to these states/provinces: CA
Note:
Fits dual alternator-equipped trucks.
Disclaimer: XDP is in no way affiliated with Cummins or any of its subsidiaries or related companies, and that Cummins has not authorized the sale of any of XDP's parts, and has not tested or approved any of XDP’s parts for use in genuine Cummins brand products.
Reviews For Fleece Performance FPE-CUMM-IHK-0724
No Reviews Yet!
Write a Review
Review this product and help other XDP customers make informed decisions!
Frequently Asked Questions
No questions about this product. Be the first to ask a question!
Ask A Question
Ask a question about this product
Please allow up to 1 business day for reply.
Specifications For Fleece Performance FPE-CUMM-IHK-0724
MPN
FPE-CUMM-IHK-0724
SKU
FPE-CUMM-IHK-0724
ID
85897
Manufacturer Name
Fleece Performance
Shipping Weight
17.00 lb.
Shipping Length
24 in.
Shipping Width
13 in.
Shipping Height
11 in.
Fuel Type
Diesel
E-Code
4
Prop 65
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
WARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov
Internal
L0R19
ITEM ADDED TO CART
Complete the job with these highly suggested add-on products.
Product prices marked with an * may require additonal fees, such as a core charge, which will be displayed in the cart.