Replace the damaged or worn steering gear in your 2001-2007 GM 2500HD/3500HD 4WD (For Trucks With 37" Tires And Larger) with the RedHead Steering Gears 2872 4T Steering Box (18:1 Ratio). RedHead is a family owned and operated company with more than 40 years of experience providing quality remanufactured steering boxes. Remanufactured from quality materials, each RedHead Steering Box is built to be stronger than the OE unit. Each Steering Box is built for a direct-fit installation that fits in the factory location.
This Unit Is For 1999-2007 Chevrolet Silverado or GMC Sierra Pickup Trucks, Suburbans, & Yukons
This
Steering Gear Box is available in a 3 Turn option which is applicable
if the vehicle is not used for off-roading, has tires that are smaller
than 37 inches in diameter, and a quicker response is desired when
steering (RedHead part #
2872)
Common Questions
HOW DO I BLEED, OR PURGE AIR, FROM MY STEERING GEAR BOX SYSTEM?1. After installing the gearbox, fill the system with fluid.
2. Raise the front wheels off the ground, do not start the vehicle.
3. Work the steering wheel back and forth, lock to lock, 15-20 times.
4. Leave the vehicle sit (overnight is best) at least 2 hours
5. Top the pump reservoir off again.
6. Work the steering wheel back and forth again 7-10 times
7.
Have a person in the vehicle and another at the pump reservoir with a
container of fluid & funnel ready to pour if necessary.
8.
Instruct the person in the vehicle to start the engine. As soon as this
happens, if the fluid level drops, be ready to pour in more fluid. The
level must be kept at an almost full level or it will suck in air again.
9. If this procedure is followed properly, the air problem will be solved.