Banks Power 66652 Derringer Tuner (W/O iDash)

AutoRate Dynamic Tuning

• Exhaust Gas Temperature (EGT) — Monitors EGT and intelligently modulates fueling to maintain a safe maximum EGT, protecting your turbo and engine.
• Altitude compensation — Senses ambient air pressure, controlling the turbocharger to maintain added boost and power as altitude increases.
• Diesel Particulate Filter (DPF) Regen — Monitors your DPF Regen status to ensure the process completes successfully.
• Accelerator Pedal Monitoring — Rolls in additional power progressively, optimizing for both part-throttle fuel economy and max power when you ask for it.
• Full Power Timer — Allows for 30 seconds of wide-open throttle before transitioning to the recommended power level for sustained tow/haul.
• Coolant Temperature Monitoring — Maintains safe power based on coolant temp.
• During warmup, no power is added below 120° F
• Power ramps in & fully available above 150° F
• If the coolant overheats for any reason, the Derringer starts removing its power at 230° F
• Additional power is totally removed if you exceed 240° F

TransCommand Active Transmission Safety System

• Intelligent Shift Tuning — Senses ambient air pressure, controlling the turbocharger to maintain added boost and power as altitude increases.
• Boost and Fuel by Gear — Monitors your DPF Regen status to ensure the process completes successfully.
• Accelerator Pedal Monitoring — Rolls in additional power progressively, optimizing for both part-throttle fuel economy and max power when you ask for it.
• Tuned Hydraulic Pressure — Allows for 30 seconds of wide-open throttle before transitioning to the recommended power level for sustained tow/haul.
• Torque Converter Clutch (TCC) Monitoring — Maintains safe power based on coolant temp.
• Shift signal is optimized for the power level protecting the transmission, increasing shift speed, and avoiding ECM power derates.
• Calibration is tuned for optimum traction and performance providing the right firmness of shift automatically.
• Ramps hydraulic pressure faster than stock, maintaining engagement as power is added safely within factory limits.
• Adjusts TCC slip to safe levels, lowering fluid temperature, and preventing extended wear.
• Transmission Slip Monitoring - Light throttle shifts remain smooth and firm, full-throttle shifts are solid and decisive.
This reduction in slip time also improves acceleration performance, an added benefit!

ActiveSafety Health Monitoring

• Internal diagnostics check system 100 times per second.
• Checks MAP and FRP signals and monitors CPU activity
• Activates in event of failure or loss of 12V power. Bypass relays smoothly return stock power with no loss of power or "Limp Home" Mode.

Manufacturer Warranty*:
1 Year Limited

Note:
For use with existing iDash (iDash not included)
When running multiple iDash together, purchase 1 Primary and 2-3 Expansion gauges.
Does not include mount for iDash.