XDP Xpressor Turbo (Remanufactured Stock Replacement) XD555

The XDP Xpressor Turbo (Remanufactured Stock Replacement) XD555 is a direct-fit replacement for the tired turbo in your 2007.5-2010 GM 6.6L Duramax LMM. Issues such as excessive temperatures, over-speeding of the turbo, a lack of lubrication, oil contamination, or worn seals can slowly cause damage to the turbo in your Chevy or GMC truck. Common symptoms of turbocharger failure can include a significant loss of power, decreased fuel economy, noisy operation, excessive smoke, increased oil consumption, or a check engine light. Thus turbocharger is well-known for issues such as soot and ash buildup in the turbine housing causing the vanes to stick or a seized unison ring. Restore proper operation of your Duramax LMM with the Xpressor OER Series Replacement Turbocharger from XDP.

Xpressor OER Series Remanufactured Turbochargers follow a comprehensive remanufacturing process to ensure it meets O.E. specifications. Each turbocharger begins with a complete disassembly and all components are thoroughly cleaned and inspected. Checks are then performed for any microscopic damage to the housing, compressor, turbine wheels, and rotating assembly. Before reassembly, all bearing surfaces are precision machined to a like new finish. The wheels and rotating assemblies are balanced to OEM specifications. Finally, all critical wear parts such as seals, thrust plates, bearings, and fasteners are replaced. A 100% end-of-line testing is performed through the full RPM sweep along with a NVH analysis to ensure the highest quality turbochargers and components. In addition, hydraulic and pneumatic leak testing is done as well as hot gas stand and burst test validations.

The XDP Xpressor Turbo (Remanufactured Stock Replacement) XD555 is a high-quality turbo for your 2007.5-2010 Chevrolet Silverado 2500HD/3500HD or GMC Sierra 2500HD/3500HD. The drop-in design allows this stock replacement turbo to offer a straightforward installation and connect to all the existing factory equipment. A turbocharger installation kit is also provided with an up-pipe to turbo gasket, upper and lower oil drain gaskets, as well as oil feed and turbo coolant banjo seals.

Features:

• Remanufactured
• Direct-Fit Replacement
• Certified To IATF 16949 Standards
• Bearing Surfaces Precision Machined
• Includes Turbocharger Installation Kit
• Burst Test & Hot Gas Stand Validated
• Noise, Vibration, Harshness (NVH) Analyzed
• Critical Wear Components & Fasteners Replaced
• Hydraulic And Pneumatic Leak Testing Performed
• 100% End-Of-Line Tested Through Complete RPM Range
• Thrust Bearing, Journal Bearing, And Oil Slinger Replacement